Total 2,780 job vacancies in lakeview lodge 2 elba gate milton keynes mk3 5qu

工作職責：

• 協調客戶或內部工具提供的新模具的新試運行。
• 建立以最短的周期時間生產最佳產品品質的流程，同時注意機器和模具的安全。
• 對新的或現有的模具、新產品和機器進行評估：預測機器、製程、模具或材料的具體問題。
• 進行室內產品分析和調查。
• 進行流程改進並為專案進一步改進提供想法。
• 必要時與客戶方就任何技術和品質問題進行互動。
• 在新產品批量生產前對進度進行監控和執行SPC。
• 確保所有產品都有適當的工程文件和工作手冊。
• 從新項目到零件批准階段與其他部門的合作包括參加NPEA會議和能力審查會議。

要求：

• 至少獲得工程文憑或同等學歷，並在塑膠射出製造環境中擁有至少 2 年相關經驗。
• 擅長分析根本原因並使用統計圖表。
• 強大的計劃、分析思考能力和解決問題的能力。
• 良好的人際交往能力，能夠作為團隊的一部分工作，激勵團隊努力並在現實的時間內實現目標。
• 積極主動，能夠在最少的監督下獨立工作。

津貼和福利：

• 開放文化
• 個人發展機會
• 每週工作 5 天

Job Responsibilities:

• To coordinate new test run of new mould supplied by customer or in-house tooling.
• To establish process that produces the best product quality with minimum cycle time at the same time taking care of machine and mould safety.
• To perform evaluation of new or existing mould, new product and machines: anticipate specific problem from machine, process, mould or material.
• To perform interior product analysis and investigation.
• To perform process improvement and contribute ideas for project further improvement.
• To interact with the counterpart on the customer side on any technical and quality issues when required.
• To monitor and perform SPC on new product before mass production on progress.
• To ensure proper engineering documentation and working manual for all products.
• To collaborate with other departments from new project till part approval stage included attending NPEA meeting and Capability Review Meeting.

Requirements:

• Process at least Diploma in Engineering or equivalent with at least 2 years relevant experience in a Plastic Injection Molding manufacturing environment.
• Excellent in analysis of root causes and use statistical chart.
• Strong planning, analytical thinker and problem solving skill.
• Good interpersonal skill, ability to work as part of team, to motivate team efforts and to deliver targets within realistic timelines.
• Pro- active and able to work independently with minima supervision.

Perks & Benefits:

• Open culture
• Personal development opportunities
• 5-day workweek

Responsibilities :

• Managing and overseeing the daily operations of the accounting department.
• Monitoring and analysing accounting data and produce financial reports or statements.
• Establishing and enforcing proper accounting methods, policies and principles.
• Coordinate and complete annual audits.
• Provide recommendations.
• Improve systems and procedures and initiate corrective actions.
• Assign projects and direct staff to ensure compliance and accuracy.
• Meet financial accounting objectives.
• Establish and maintain fiscal files and records to document transactions.

Requirements :

• Possess at least a Bachelor's Degree, Post Graduate in Accounting or professional qualification
• Proven working experience as Accounting Manager, Accounting Supervisor or Finance Manager.
• Advanced computer skills on MS Office, accounting software and databases.
• Proficient in manipulating large amounts of data.
• Proven knowledge of bookkeeping and accounting principles, practices, standards, laws and regulations.
• Attention to detail and accuracy.
• Strong leadership skills, proactive and result-oriented.

Benefits :

• Free parking
• Health insurance
• Maternity leave
• Opportunities for promotion
• Performance bonus

Perks & Benefits

• Employee equity
• Personal leave
• Personal development opportunities

Responsibilities :

• Managing and overseeing the daily operations of the accounting department.
• Monitoring and analysing accounting data and produce financial reports or statements.
• Establishing and enforcing proper accounting methods, policies and principles.
• Coordinate and complete annual audits.
• Provide recommendations.
• Improve systems and procedures and initiate corrective actions.
• Assign projects and direct staff to ensure compliance and accuracy.
• Meet financial accounting objectives.
• Establish and maintain fiscal files and records to document transactions.

Requirements :

• Possess at least a Bachelor's Degree, Post Graduate in Accounting or professional qualification
• Proven working experience as Accounting Manager, Accounting Supervisor or Finance Manager.
• Advanced computer skills on MS Office, accounting software and databases.
• Proficient in manipulating large amounts of data.
• Proven knowledge of bookkeeping and accounting principles, practices, standards, laws and regulations.
• Attention to detail and accuracy.
• Strong leadership skills, proactive and result-oriented.

Benefits :

• Free parking
• Health insurance
• Maternity leave
• Opportunities for promotion
• Performance bonus

Perks & Benefits

• Employee equity
• Personal leave
• Personal development opportunities

職責：

• 管理和監督會計部門的日常運作。
• 監控和分析會計數據並產生財務報告或報表。
• 建立並執行適當的會計方法、政策和原則。
• 協調並完成年度審計。
• 提供建議。
• 改進系統和程序並採取糾正措施。
• 分配專案並指導員工以確保合規性和準確性。
• 滿足財務會計目標。
• 建立和維護財務文件和記錄以記錄交易。

要求 ：

• 至少擁有學士學位、會計研究生或專業資格
• 擁有豐富擔任會計經理、會計主管或財務經理的工作經驗。
• MS Office、會計軟體和資料庫方面的高級電腦技能。
• 擅長處理大量數據。
• 具備簿記和會計原則、實務、標準、法律和法規的豐富知識。
• 注重細節和準確性。
• 領導能力強，積極主動，注重結果。

好處 ：

• 免費停車
• 健康保險
• 產假
• 晉升機會
• 績效獎金

津貼和福利

• 員工股權
• 事假
• 個人發展機會

Responsibilities :

• Managing and overseeing the daily operations of the accounting department.
• Monitoring and analysing accounting data and produce financial reports or statements.
• Establishing and enforcing proper accounting methods, policies and principles.
• Coordinate and complete annual audits.
• Provide recommendations.
• Improve systems and procedures and initiate corrective actions.
• Assign projects and direct staff to ensure compliance and accuracy.
• Meet financial accounting objectives.
• Establish and maintain fiscal files and records to document transactions.

Requirements :

• Possess at least a Bachelor's Degree, Post Graduate in Accounting or professional qualification
• Proven working experience as Accounting Manager, Accounting Supervisor or Finance Manager.
• Advanced computer skills on MS Office, accounting software and databases.
• Proficient in manipulating large amounts of data.
• Proven knowledge of bookkeeping and accounting principles, practices, standards, laws and regulations.
• Attention to detail and accuracy.
• Strong leadership skills, proactive and result-oriented.

Benefits :

• Free parking
• Health insurance
• Maternity leave
• Opportunities for promotion
• Performance bonus

Perks & Benefits

• Employee equity
• Personal leave
• Personal development opportunities

職責與責任

• 負責間接材料採購，執行供應商選擇、評估和監控。
• 與內部和外部各方（例如供應商、運輸商、運輸代理、貨運代理等）協調間接物料需求計劃，直到貨物交付為止。確保系統準確收貨並監控庫存。
• 協調和驗證供應商的交貨和帳單文件，以確保 SAP 系統中的配對流程順利完成。監控進度付款採購，尤其是那些不間斷的工程項目。
• 確保所有採購活動和文件均符合部門程序。保持對報價/合約和零件/產品規格記錄的適當控制。
• 及時解決SAP採購模組相關問題。
• 設定年度 KPI 並啟動與部門年度目標一致的間接材料成本節約專案。
• 制定年度和每月的基線和延伸計劃，以監控節約結果。每月向上級提交成本節省報告/結果以供驗證和記錄。
• 確保所有採購活動始終符合當地法律和法規要求（海關、MIDA 和 MITI）。
• 與 MIDA 和海關聯絡，申請維修備件、設備、IP 項目物品和其他原料的進口關稅豁免。
• 上級或管理層根據需要分配的任何其他此類職責。
• 透過了解和了解現場 EHS 標準來維護安全的工作環境，並確保遵守地方、州和聯邦 EHS 法規。
• 根據上級要求執行任何其他臨時任務。

要求

• 候選人應至少擁有商業研究/供應鏈管理文憑或學位或同等學歷，並在製造環境中擁有至少 3 年相關工作經驗。
• 良好的談判和人際交往能力，足智多謀，忠誠，高效，在最少的監督下工作，充滿活力，以結果為導向。
• SAP系統的經驗與知識，
• 精通 Microsoft Power Point、Word 和 Excel。

津貼和福利

• 醫療保險
• 雜項津貼
• 小費
• 較高的 EPF 百分比

職責與責任

• • 直接向生產經理報告並與他密切合作以實現部門目標。
  • 確保公司的品質系統在部門內被理解並實施。
  • 與生產計劃員緊密合作，參考主生產計劃啟動每日生產計劃，以滿足客戶訂單並能夠及時交貨。
  • 根據需要對所有現有製造流程進行監控、審查和改進（包括 MO 工廠 GC 分析和監控）
  • 研究新製程、新技術在我們製程中應用的可行性。
  • 檢查製程參數和製造日誌表。在適當的情況下建議任何改進、預防措施和糾正措施。
  • 監控/提高製程穩定性和製程安全性。有關過程控制的建議，以獲得更一致的品質。減少客戶投訴。
  • 對產品、流程和系統不合格項進行根本原因分析並實施糾正和預防措施，並對所採取措施的違規行為進行追蹤。
  • 收集和分析有關流程、公用事業以及流程和工廠設備效率的數據。研究並嘗試新的試驗項目/流程。
  • 培訓和發展下屬，提高能力和知識。
  • 透過了解和了解現場 EHS 標準來維護安全的工作環境，並確保遵守地方、州和聯邦 EHS 法規。
  • 根據上級要求執行任何其他臨時任務。

要求

• • 候選人應至少擁有化學工程學位或同等學歷。
  • 至少2年製造環境相關經驗。
  • 化學製造業的工作經驗是一個額外的優勢。
  • 熟悉 ISO 9001 是額外優勢。
  • 最好熟悉執行工藝工程改進活動並管理合理的員工規模。
  • 必要時能夠在正常工作時間之外工作。
  • 能夠獨立工作或在較小的監督下工作。
  • 良好的英語和馬來語書面和口語溝通能力。
  • 精通 Microsoft Word 和 Excel。

津貼和福利

• 醫療保險
• 雜項津貼
• 小費
• 較高的 EPF 百分比

• 職責與責任
  • 直接向生產經理/助理生產經理報告並與他密切合作以實現部門目標。
  • 確保公司的品質系統在部門內被理解並實施。
  • 與生產計劃員緊密合作，參考主生產計劃啟動每日生產計劃，以滿足客戶訂單並能夠及時交貨。
  • 監控、審查並根據需要對所有現有製造流程進行改進，包括噴霧乾燥設備和煙囪的氣流測試。
  • 協助部門主管完成月末結算和報告。
  • 檢查製程參數和製造日誌表。在適當的情況下建議任何改進、預防措施和糾正措施。
  • 審查每日生產報告並根據生產計劃監控實際生產。
  • 確保對產品、流程和系統不合格項採取糾正和預防措施，並對所採取措施的違規行為採取後續行動。
  • 帶領值班主管實現工廠平穩且有效率的運行，以達到營運目標。
  • 培訓和發展技術人員並提高能力和知識。
  • 進行審核、檢查和 HIRARC 評估。
  • 檢測現有或潛在的健康和安全隱患，識別差距並提出糾正和預防措施建議。
  • 透過了解和了解現場 EHS 標準來維護安全的工作環境，並確保遵守地方、州和聯邦 EHS 法規。
  • 根據上級要求執行任何其他臨時任務。
• 要求
  • 候選人應至少擁有化學工程學位或同等學歷。
  • 至少2年製造環境相關經驗。
  • 化學製造業的工作經驗是一個額外的優勢。
  • 熟練使用 AutoCAD 計算機。
  • 有噴霧乾燥設備或濾袋系統經驗者優先。
  • 熟悉 ISO 9001 是額外優勢。
  • 必要時能夠在正常工作時間之外工作。
  • 能夠獨立工作或在較小的監督下工作。
  • 良好的英語和馬來語書面和口語溝通能力。

津貼和福利

• 醫療保險
• 雜項津貼
• 小費
• 較高的 EPF 百分比

Duties & Responsibilities

• To follow instruction and co-operate with the superior.
• To check and ensure the right type and correct quality of raw materials are used for resin manufacturing.
• To carry-out in-process checking and testing in accordance with the standard test methods.
• To assist in charging of raw materials, cleaning of equipment and any maintenance work.
• To complete the process logsheet - the process time, parameter, the date, shift, checklist and yield accordingly as stipulated in the logsheet and work instruction.
• To pack and pump the finished goods in accordance to the instruction given by Supervisor or stated in the logsheet.
• To ensure good housekeeping.
• Any other duties as assigned by Shift Supervisor.
• To maintain a safe working environment with awareness and knowledge of site EHS standards and ensure compliance with local, state and federal EHS regulations.
• To perform any other ad-hoc task as and when required by the Shift Supervisor.

Requirements

• Candidate must possess at least SPM level.
• Able to work under pressure in a fast-paced environment.
• Good initiatives and good team player.
• Strong interpersonal integrity.

Perks & Benefits

• Medical insurance
• Miscellaneous allowance
• Gratuity
• Higher % EPF

• Duties & Responsibilities
  • To report directly to Production Manager/ Assistant Production Manager and work closely with him to achieve departmental objective.        
  • To ensure the company’s quality system is understood in the department and implemented.
  • To work closely with production planner to initiate Daily Production Schedule with the reference to Master Production Schedule to meet customer orders and be able to deliver timely. 
  • To monitor, review and make improvement if required on all existing manufacturing processes which including the air flow testing at spray dried plant and chimney.
  • To assist department head in month end closing and reporting.
  • To review process parameters and manufacturing log sheets. To recommend any improvements, preventive actions and corrective actions where appropriate.
  • To review daily production report and to monitor actual production against the production schedule.
  • To ensure corrective and preventive action is taken for product, process, and system non-conformances and to follow-up on the offences of the action taken.
  • To lead shift supervisor to achieve smooth and efficient running of plant to meet operation target.
  • To train and develop technicians and improve competency and knowledge.
  • To carry out audits, inspections, and HIRARC assessment.
  • To detect existing or potential health and safety hazards, gaps identification and recommend corrective and preventive measures. 
  • To maintain a safe working environment with awareness and knowledge of site EHS standards and ensure compliance with local, state and federal EHS regulations.
  • To perform any other ad-hoc task as and when required by the superior.
• Requirements
  • Candidate should possess at least a Degree in Chemical Engineering or equivalent.
  • At least 2 years related experience manufacturing environment.
  • Working experience in chemical manufacturing industry is an added advantage.
  • Computer literate in AutoCAD.
  • Experience in spray dried plant or filter bag system is an advantage.
  • Good knowledge in ISO 9001 is an added advantage.
  • Able to work beyond normal working hours when necessary.
  • Able to work independently or with minor supervision.
  • Good communication skills in English and Bahasa Malaysia, both written and spoken.

Perks & Benefits

• Medical insurance
• Miscellaneous allowance
• Gratuity
• Higher % EPF

Duties & Responsibilities

• In charge of Indirect Material sourcing/procurement, perform vendor selection, evaluation and monitoring.
• Coordinate with internal & external parties (e.g. vendors, transporters, shipping agents, forwarders etc.) on the indirect material requirement planning until goods delivery. Ensure accurate goods receipt in system and monitoring inventory.
• Coordinate and verify vendors’ delivery and billings documents to ensure matching process smoothly done in SAP system. Monitor progress payment purchases especially for those engineering projects without disruption.
• Ensure all procurement activities and documentations are in accordance with the departmental procedures. Maintain proper control of records for quotations/ contracts and parts/products specification.
• Resolve SAP issues which related to procurement module in timely manner.
• Set yearly KPI and initiate cost saving projects for Indirect Material which align with department yearly target.
• Work out baseline and stretch plan for yearly and monthly basis in order to monitor saving result. Submit monthly cost saving report/result to superior for verification and record. 
• Ensure all procurement activities are consistently complying with local statutory and regulatory requirements (custom, MIDA and MITI).
• Liaise with MIDA & Customs office for application of import duty exemption for maintenance spare parts, equipment, IP Project items and other raw materials.
• Any other such duties assigned by superior or Management as and when required.
• To maintain a safe working environment with awareness and knowledge of site EHS standards and ensure compliance with local, state and federal EHS regulations.
• To perform any other ad-hoc task as and when required by the superior.

Requirements

• Candidate should possess at least a Diploma or Degree in Business Studies / Supply Chain Management or equivalent with at least 3 years related working experience in the manufacturing environment.
• Good negotiation and interpersonal skills, resourceful, committed, highly effective and work under minimum supervision, dynamic and results oriented. 
• Experience and knowledge in SAP system,
• Proficient in Microsoft Power Point, Word and Excel.

Perks & Benefits

• Medical insurance
• Miscellaneous allowance
• Gratuity
• Higher % EPF

• Duties & Responsibilities
  • To report directly to Production Manager and work closely with him to achieve departmental objective.
  • To ensure the company’s quality system is understood in the department and implemented.
  • To work closely with production planner to initiate Daily Production Schedule with the reference to Master Production Schedule to meet customer orders and be able to deliver timely.
  • To monitor, review and make improvement if required on all existing manufacturing processes (including MO Plant GC analysis and monitoring)
  • To study feasibility of new process and new technology to apply in our process.
  • To review process parameters and manufacturing log sheets. To recommend any improvements, preventive actions and corrective actions where appropriate.
  • To monitor/ improve process stability and process safety. Advice on process control to have more consistent quality. Reduce customer complaint.
  • To perform root cause analysis and implement corrective and preventive action for product, process and system non-conformances and to follow-up on the offences of the action taken.
  • To gather and analyses data on process, utilities and efficiency of process and plant equipment. Study and try new trial project/process.
  • To train and develop subordinated and improve competency and knowledge.
  • To maintain a safe working environment with awareness and knowledge of site EHS standards and ensure compliance with local, state and federal EHS regulations.
  • To perform any other ad-hoc task as and when required by the superior.
• Requirements
  • Candidate should possess at least a Degree in Chemical Engineering or equivalent.
  • At least 2 years related experience manufacturing environment.
  • Working experience in chemical manufacturing industry is an added advantage.
  • Good knowledge in ISO 9001 is an added advantage.
  • Preferably those familiar in carrying out process engineering improvement activities.
  • Able to work beyond normal working hours when necessary.
  • Able to work independently or with minor supervision.
  • Good communication skills in English and Bahasa Malaysia, both written and spoken.
  • Proficient in Microsoft Word and Excel.

Perks & Benefits

• Medical insurance
• Miscellaneous allowance
• Gratuity
• Higher % EPF

Requirements

• Candidate must be able to use Adobe Premiere Pro
• Creative in problem solving
• Candidate MUST include video portfolio link on resume

Responsibility

• To perform video editing.
• To lay music and sound effects on to the video.
• To coordinate the project with a team of animators

Benefits

• Working with a young + creative team
• Annual bonus
• EPF/SOCSO
• Company trip

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Company trips
• Personal leave

職責與責任

• 服從上級指示，配合上級工作。
• 檢查並確保樹脂製造所用原料的類型和品質正確。
• 依照標準試驗方法進行過程檢查和試驗。
• 協助原料加料、設備清潔及任何維護工作。
• 完成製程日誌 - 製程時間、參數、日期、班次、檢查表和產量，如日誌和工作指示中規定。
• 根據主管的指示或記錄表中的說明包裝和泵送成品。
• 確保良好的內務管理。
• 值班主管指派的任何其他職務。
• 透過了解和了解現場 EHS 標準來維護安全的工作環境，並確保遵守地方、州和聯邦 EHS 法規。
• 根據值班主管的要求執行任何其他臨時任務。

要求

• 候選人必須至少擁有 SPM 等級。
• 能夠在快節奏的環境中承受壓力工作。
• 良好的主動性和良好的團隊合作精神。
• 人際溝通能力強。

津貼和福利

• 醫療保險
• 雜項津貼
• 小費
• 較高的 EPF 百分比