Total 385 Engineering job vacancies in New Cumberland Defense Logistics Center, Pennsylvania

• Direct materiel testing programs and laboratory tests at the Division level.
• Oversee and approve hazard analyses and hazard mitigation procedures for handling and testing of developmental and fielded weapon systems, components and assemblies.
• Review and approve facility, system and test program specific safety operating procedures in accordance with applicable regulations.
• Oversee the application of scientific theories, physical concepts and engineering principles for environmental testing.
• Direct implementation of approved test methods, equipment, and facility development.
• Consultant in the area of environmental testing, participates in conferences and meetings.
• Administer leave, plans work to be accomplished by subordinates, sets and adjust short-term priorities.
• Prepare schedules for completion of work and effect minor disciplinary measures for employees.
• Recommend action in more serious cases, actions, and employee training and development requirements; evaluate employee performance, advises, counsels, and gives instructions as required on technical and administrative matters.

• You will be the Valley Forge Reentry main Point of Contact for PMOSSP Reentry .
• You will lead a team, mentor engineers, be in charge of day-to-day activities including appropriately tasking team members, and report directly to the PMOSSP Reentry Section Head.
• You will lead development efforts related to the Strategic Weapons Systems (SWS) and missile, reentry and guidance subsystems including: aerodynamic structures; electronics; test equipment; support equipment; software; and ordnance engineering.
• You will monitor and approve efforts dealing with acceptability, utilization and sustainment of hardware, support equipment, and software including design and process changes.
• You will assure that configuration control of weapons systems is in compliance with the approved Configuration Management processes.
• You will provide special technical expertise and leadership in complex coordination and management of all contractor engineering and product assurance efforts.
• You will influence, lead, monitor, and approve contractor design and product quality assurance efforts in satisfying contractual requirements for various subsystems
• You will implement program policy, engineering criteria, and provide information to the prime contractor and Navy field activities.
• You will represent the command in assigned areas of responsibility when interfacing with field activities, fleet representatives, contractors, Department of Energy (DOE), National Nuclear Security Administration (NNSA), laboratories, and consultants.

• You will provide direction, design integration, planning, testing, supportability, product management, verification and validation, certification and integrity, and security of the electric plant and machinery control software-based systems.
• You will lead software development and coding efforts, including Implementation of cybersecurity controls, secure software, and development environment.
• You will establish a Generic Instrumentation and Control software development and infrastructure environment.
• You will coordinate with management, sponsors, technical stakeholders, design and in-service engineers, contractors, and end users to provide specialized technical advice applicable to program development.
• You will develop a plan of action outlining requirements and justification for proposed approach, estimates of the scope, cost, facilities and time schedule involved.
• You will research technological areas related to the engineering of hardware and software integration methodology.
• You will provide analysis and software implementation of system requirements and conceptual design of software design and development infrastructure.
• You will explore data acquisition and data analysis methodologies to support test and evaluation evolutions.
• You will apply state-of-the-possible computer engineering methodology, assessment and modernization of existing systems and review and/or prepare technical specifications for contracted efforts.

• Ensures delivery of programs, products or services and technology to the customer that are compliant with all program requirements for technical, cost, schedule and quality performance.
• Ensures KSC Research and Technology is effectively managed and strategically planned for various programs under the Space Technology Mission Directorate (STMD) and the Exploration Systems Development Mission Directorate (ESDMD).
• Provides leadership to employees in Research and Technology Management Office, working with the deputy chief with workload management, employee growth opportunities, and/or other supervisory duties.
• Communicates and reports on KSC Research and Technology to senior managers, NASA HQ program executives, partners, and other external entities.
• Maintains and implements contact with stakeholders and customers, as required, in order to understand customer objectives, plans and requirements.
• Develops, leads, and integrates a diverse team of skilled and competent members throughout the formulation, approval, implementation, and evaluation sub-processes involved in managing programs.
• Ensures the development of tools and methods to assess and facilitate the execution of KSC’s Research and Technology portfolio.
• Performs a full range of supervisory duties which includes assigning and evaluating work; recommending personnel actions; taking disciplinary actions; and identifying training needs and developing employees.
• Fosters a culture of engagement, diversity, inclusiveness, excellence and innovation. Champions NASA's commitment to Diversity, Equity, Inclusion and Accessibility to create an environment that promotes a commitment to safety, integrity and teamwork.

• Prepares detailed fee estimates used for negotiating with architect/engineering firms for design services.
• Reviews, evaluates, and determines adequacy of shop drawings, samples certificates, and other submittals and data from contractors covered by Government contracts. Determines compliance or noncompliance for such submittals.
• Evaluates technical data pertaining to materials, equipment, shop drawings, proposals for modifications and additions, and methods of installation submitted by contractors.
• As assigned, makes periodic inspections of completed hydraulic structures. Inspects bridges included in the National Bridge Inspection Program.
• Assists in administering construction projects, and makes recommendations to contract officers concerning contract modification. Participates in cost estimating.
• Develops original methods of analyses for structural investigations of old construction to determine structural safety under current loading and recommends corrective actions when structures are inadequate.

Product area

Whether it is paying online with Autofill, using tap and pay in stores, or using the Google Pay app, the Payments team at Google is focused on making payments simple, seamless, and secure. In addition to consumer payment technologies, the Payments team also powers the money movement between Google and its consumers and businesses.

Job description

Google's software engineers develop the next-generation technologies that change how billions of users connect, explore, and interact with information and one another. Our products need to handle information at massive scale, and extend well beyond web search. We're looking for engineers who bring fresh ideas from all areas, including information retrieval, distributed computing, large-scale system design, networking and data storage, security, artificial intelligence, natural language processing, UI design and mobile; the list goes on and is growing every day. As a software engineer, you will work on a specific project critical to Google’s needs with opportunities to switch teams and projects as you and our fast-paced business grow and evolve. We need our engineers to be versatile, display leadership qualities and be enthusiastic to take on new problems across the full-stack as we continue to push technology forward.

Qualifications

Job responsibilities

• Build out data infrastructure and data pipelines in a secure and privacy compliant manner.
• Work with feature teams to provide reliable data and infrastructure.
• Maintain existing data infrastructure and ensure critical data is available and reliable.

Minimum qualifications

• Bachelor's degree or equivalent practical experience.
• 1 year of experience with software development in one or more programming languages (e.g., Java, C++).

Preferred qualifications

• Experience working with large data and creating and making available data cubes for other teams.
• Experience in optimizing data processing pipelines and data serving.
• Experience with data analysis and visualization tools (e.g., SQL, Colab).

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Coastal Protection and Flood Resilience Institute (CFI) Singapore is actively seeking a Research Engineer to contribute to a groundbreaking research project. This research explores the efficacy of integrated nature-based solutions in sediment erosional control and coastal protection. The goal is to develop innovative, physically based models that quantify the protective benefits a vegetation meadow can offer to shorelines.

The Research Engineer will participate in experimental research, with a specific focus on studying sediment flux in hybrid solutions to coastal protection. He/she will lead and execute flume experiments, data analysis and field sampling as well as specific tasks which includes planning and conducting experiments, running laboratory analyses, collection and analysis of data, and performing basic administrative duties.

He/she will work need to work with Assistant Professor Gary Lei from Civil and Environmental Engineering and Dr. Ow Yan Xiang from the Tropical Marine Science Institute (TMSI) at NUS. Ideally, we are interested in candidates with prior experience with laboratory experiments.

Job Requirements

• Possess a bachelor’s degree in environmental engineering /Environmental Science/ Mechanical Engineering, or a closely-related field.
• Priority will be given to applicants who have prior research experience in coastal engineering, aquatic plants science, eco-hydraulics, and/or environmental fluid mechanics.
• Strong verbal and written communication skills.
• Proficient with Microsoft Suite and R, or other equivalent analytic software.
• Open to fixed-term contract.

As a Senior Piping Engineer, he/she shall act as key person of the project as designated by Piping Department Manager and Lead Piping Engineer and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties and Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project as directed by Piping Design Supervisor.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform the function inherent to Piping Key Person as designated by Piping Department Manager and Lead Piping Engineer.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager and Lead Piping Engineer.
• To carry out engineering support work during the construction phase of the project.

Requirements:

Education:

• Bachelor degree of any four years BS Engineering course preferably Mechanical Engineering or at least ten (10) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of eight (8) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, three (3) years of which in a supervisory capacity.

Skill Requirements:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good Knowledge of AutoCAD.
• Good knowledge of SP3D.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Good interpersonal and communication.

Position Summary:

The Systems Engineer undertakes complex projects related to systems

provisioning, installations, configurations as well as monitoring and

maintenance. He/She applies highly developed specialist knowledge and

skills in systems administration and works toward continuous optimisation

of systems performance. He/she implements systems improvements and

instructs other IT staff in the resolution of complex issues. He/She is required

to be on standby with on-call availability with varied shifts including

nights, weekends and holidays.

He/She is able to quickly and effectively solve issues as they arise. He/She is able

to methodically identify the cause of the issue, evaluate it and develop a

solution in

collaboration with the team. He/She communicates effectively and displays

high level of service standards.

Role and Responsibilities:

Execute Systems Administration Service Levels

• Monitor systems performance and usage, including response times
• Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting
• Communicate regularly with technical, applications and operational staff to ensure systems integrity and security
• Determine the systems’ short- and long-term requirements
• Manage systems report production

Advise on System Capabilities

• Advise senior leaders on system concepts and functional capabilities
• Provide technical advice to the team and clients on installation, setup configuration of systems
• Interpret internal or external business issues and recommends solutions/best practices
• Implement plans to make systems available to users in a shared, secure and controlled manner

Develop New Systems

• Lead the development of new systems as per the system requirements
• Design security and integrity controls
• Conduct new systems testing and implementation
• Define the system maintenance procedures
• Analyse the use of new systems to identify enhancement needs
• Lead research initiatives for the development of advanced and automated approaches for system administration
• Optimise systems performance
• Seek opportunities to optimise the delivery of systems services with emphasis on availability, reliability, scalability, and security
• Conduct regular system audits and upgrades
• Develop automated processes to define, measure, and report on service quality, stability and capacity Resolve issues
• Oversee the assessment of risks to systems
• Identify complex system issues to provide advisory to the stakeholders
• Investigate cause of systems issues
• Resolve complex issues
• Provide escalation support for issues presented by the user

Requirements / Qualifications

• Degree in Computer Science, Engineering or equivalent.
• At least 5 - 8 years’ experience in developing, implementing and
• maintaining IT systems
• Systematic in approach and familiar with enterprise level troubleshooting.
• Strong communications skills with stakeholders and ROs.
• Experience in healthcare applications preferred and/or willing to take up the challenges in a healthcare related industry.

Position Summary / Project Description

This is for the Automation Team under the Systems Technologies which focuses on DevOps and automation for internal IT that includes a lot of automation work around IaC.

Roles And Responsibilities

• Design, develop and implement various infrastructure automation and robotic process automation to transform current operation processes.
• Present ideas for process/system transformation
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks
• Ensure smooth transition of processes

Requirements / Qualifications

• Minimum Degree in Computer Science / Information Technology or equivalent.
• Proficient in automation technologies such as Ansible, Chef, CI/CD, Jenkins, Terraform etc.
• Minimum 4 years and above of relevant hands-on experience in system operation support and project management.
• Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.
• Experience in troubleshooting, resolving, and communicating incidents and underlying issues to identify root cause.
• Possesses strong analytical skills to diagnose and address application problems.
• Result and customer oriented with multi-tasking capabilities

Responsiblities:

• Responsible for ferrying of staff and dispatch works as assigned
• Ensure timely collections and deliveries of goods / items
• Ensure cleanliness and general upkeep of vehicles at all times
• Perform routine inspection of vehicle and notify of occurring deficiencies or needs for repairs
• To perform work according to health and safety regulations
• Ensure safety practices and housekeeping is to maintained to the highest standard
• To perform Ad-Hoc duties as per assigned

Requirements:

• Class 3 / 4 Driving License
• Familiar with Singapore route
• Min 2years of relevant experience

Assist with infrastructure planning and design

• Assist with the planning and design of infrastructure systems
• Assist with the documentation of infrastructure design and planning activities and decisions

Support infrastructure operations

• Perform infrastructure operations activities such as installations of infrastructure systems according to design specifications
• Align infrastructure operations with agreed service agreement standards

Maintain infrastructure

• Perform activities related to ongoing maintenance of infrastructure
• Assist with the implementation of agreed infrastructure changes and maintenance routines

Optimise infrastructure performance

• Perform ongoing tuning and optimisation of infrastructure hardware and software components such as updates and upgrades
• Participate in infrastructure development activities
• Assist with infrastructure testing and implementation
• Gather performance and data usage statistics for capacity planning and reporting
• Assist with piloting of new tools, technologies, and/or processes

Resolve incidents

• Perform problem/issue identification and resolution
• Assist with simulation of user problems to resolve operating difficulties
• Follow up with users to ensure problem has been resolved
• Recommend system modifications to reduce user problems

Requirements

• At least 6 years' of experience in the Network Management and Support Services, Unified Communication, Wirecenter maintenance
• Strong knowledge and experience in supporting Cisco Switch, Cisco Router, Fortigate Firewall, Palo Alto Firewall, ClearPass NAC, F5 VPN, IPS, WLC, Access Point and VSS/VLAN Architectures.
• Network Support in the areas of wireless, wired, VPN
• Network certifications eg CCNE, CCNA

Roles and Responsibility:

• Preparation of Piping Material Specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To calculate/validate pipe wall thickness, branch reinforcement etc.
• To prepare line index, Material summary (BM/BQ).
• To carry out engineering support work during the construction phase of the project.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Minimum of Ten (10) years in the field of piping engineering involving material, design, production work, 3D model review, stress and construction engineering support.
• Bachelor’s Degree in Mechanical Engineering or equivalent combination of education and experience.
• Good knowledge and experience of ASME, ASTM, BS and other relevant standards.
• Basic knowledge of AutoCAD/AP3D/S3D.
• Basic knowledge of 3D Model review through Navisworks or SPR.
• Strong analytical and reasoning abilities.
• Good leadership skills.
• Good interpersonal and communication skill.

Responsible in the preparation of line index, tie-in list, piping layout and information, loading calculation, MTO sketch, BM/BQ, and 2D/3D CAD modeling of piping system, equipment and structure, interference detection, and model review.

Has the technical responsibility for developing stress/vibration sketch/model, and mechanical data, for interpreting moment, stress, reaction force, and displacement, and for coordination these responsibilities with reports to ensure timely completion that meets project schedule and budget.

Duties & Responsibilities:

• Studies ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan through the guidance of Senior Piping.
• Prepares line index, tie-in list, piping layout, piping information, loading calculation, steam trace layout, MTO sketch, BM/BQ, plan and isometric drawing in compliance with project standards, specifications, contract requirements, and accepted engineering and construction practices.
• Selects line which requires stress/vibration sketch following the criteria set for analysis and evaluation, prepares mechanical data, and performs calculation for initial displacement with assistance of Senior Piping Engineer.
• Assists in developing model for stress/vibration analysis, interprets and evaluates result, and recommends method of resolution to comply with applicable vendor’s allowable or code requirements.
• Performs highly specialised 3D CAD modeling of equipment, structural, and piping system, interference detection, annotation, model review, and plan drawing extraction according to project 3D modelling procedure and by the use of PDS Intergraph or SP3D CAD software.
• Prepares steam trace piping drawings and pipe support drawings in 2D CAD format.
• Assists the Senior Piping Engineers or project Key Person in field survey work to develop conceptual routing, verify tie-in location, and other related activities.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Bachelor’s Degree in Mechanical or Chemical Engineering with 5 years of experience.
• Training will be provided.
• Ability to use computer equipment and peripherals to carry out routine computing and 2D/3D CAD tasks. Ability to adapt with changes due to upgrading of computer software. Capable to utilize AutoCAD/Cad Pipe /Microstation 2D CAD; PDS Intergraph and SP3D softwares with minimal assistance.
• Ability to apply mathematical concepts in piping calculations such as exponents, logarithms, trigonometric functions, quadratic equations and other applicable formulas.
• Ability to read, analyse and interpret common technical information, reports and instructions. Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communication.
• Strong analytical and reasoning abilities.
• Good interpersonal and communication.