QUALIFICATIONS
Must be 18 years of age and have a HS Diploma or equivalent.  Must be willing to learn team skills and work in a team environment.  Daily routine requires being on your feet nearly 100% of the time, walking, and standing, stooping, or bending.  Must be able to lift, push and pull to remove extinguishers along the assembly line and pack extinguishers where average to heavy weight is involved.  Must be able to read, write, and understand simple math and work from blueprints.

DUTIES

Fill Equipment

• Monitors equipment and controls of Fill and Material Handling System; monitors inputs (air dryer, compressor, chemical flow, vacuum pressure, etc.) and makes the appropriate system adjustments.
• Inspects product and records results per First Article Instructions and/or Work Instructions if required; makes appropriate system adjustments as a result of the inspection process.
• Maintains equipment (vacuums equipment and area, cleans fill heads, etc. performs required Preventative Maintenance, etc.) per Work Instructions.
• Changes over equipment for various model shells (units) and chemicals.
• Reworks rejected units and returns them to the system.

Pre-Test Equipment

• Manually loads/unloads units to the conveyors in the event of a Material Handling equipment breakdown.
• Occasionally performs material handling duties (restocking parts, removing pallets, etc.).
• Monitor and operate valve assembly and insertion robots.
• Monitors equipment and controls of the auto torquing station (cycle times, torque parameters, etc.); manually verifies the torque of the head assembly per Work Instructions.
• Monitors the Torque "Gaping" station and makes the necessary system adjustment to system.
• Monitors equipment and controls of the automatic Gassing station.
• Monitors gas mixture equipment and changes gas cylinder (banks) when required.
• Manually inserts Ring Pins into units.
• Manually assembles the Safety Tie.
• Verifies the pull force of the Safety Seal per Work Instructions.
• Monitors material handling system.
• Inspects product and records results per First Article Instructions and/or Work Instructions if required; makes appropriate system adjustments as a result of the inspection process.
• Maintains equipment per Work Instructions and makes appropriate system adjustments.
• Changes over equipment for various model shells (units).
• Restocks product component parts (Head Assemblies, Ring Pins, etc.) when required.
• Reworks rejected units and returns them to the system.
• Manually loads/unloads units onto/off the conveyor in the event of a Material Handling equipment breakdown.

Mass Spectrometer

• Monitors equipment and controls of the Mass Spectrometer and handles rejected shells accordingly.
• Monitors oil levels.
• Monitors the Labeler equipment.
• Maintains equipment and tools per Work Instructions.
• Changes over equipment for various models.
• Inspects shells (critical dimensions, visual checks) and records results per First Article Instructions and/or Work Instructions if required; makes appropriate system adjustments as a result of the inspection process.
• Manually loads/unloads units onto/off of the conveyor in the event of a Material Handling equipment breakdown.
• Occasionally performs material handling duties (restocking parts, removing pallets, etc.).

Packaging System

• Monitors equipment and controls of Packaging Machine, Print and Apply Labeler, Palletizing Machine, and Stretch Wrap Machine.
• Manually places literature and hanger hook into cartons.
• Maintains equipment performs required Preventative Maintenance per Work Instructions.
• Changes over equipment for various models.
• Inspects un-cartoned and packaged units and records results per First Article Instructions and/or Work Instructions if required; makes appropriate system adjustments as a result of the inspection process.
• Manually loads/unloads units onto/off of the conveyor in the event of a Material Handling equipment breakdown.
• Occasionally performs material handling duties (restocking parts, removing pallets, etc.).

Other (as needed)

• Performs miscellaneous related duties as assigned by the Supervisor.
• Supporting the training and development of peers within the organization.

ENVIRONMENTAL, HEALTH, AND SAFETY OBLIGATIONS
Comply with the following Environmental, Health and Safety duties as a condition of employment:

• Comply with safety rules
• Attend and Participate in Safety Training
• Participate actively in the safety process
• Ask questions if something isn’t known
• Report all accidents and injuries immediately
• Submit suggestions to improve safety
• Know responsibilities in the event of an emergency (i.e., what to do in the event of an alarm for fire, chemical spills, tornados, etc.)
• Be a coach to others who are acting unsafely
• Must have Lock-out tags after 2 months
• Attend and participate in all hazardous and non-hazardous waste trainings.
• Ability to recognize chemical hazardous labels.
• Spill management and clean-up.
• Air shutoff locations.
• Capability to follow satellite accumulation rules and requirements.
• Proficiency to recognize hazardous wastes in your area and manage properly.

Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Are you currently a Walmart associate?

Please login to your Workday account and use the Find Jobs report to apply for this job.

• Find Jobs

Schedules...

Various schedules may be available and the details will be discussed during the interview process.

Position Summary...

What you'll do...

Communicate with (or to) individuals or groups verbally and/or in writing (e.g. customers, suppliers, associates).
Ensure freight quality by processing stray and damaged cases; inspecting pallets, shrink wrap, and freight for damage; cutting shrink wrap as needed; and maintaining records, logs, and forms.
Maintain merchandise supply by replenishing pallets of merchandise onto/from racks or docks using warehouse systems or through verbal instructions.
Organize warehouse by using power equipment to remove pallets from pallet returns (e.g., pallet storage, trailers); up-stacking/down-stacking empty pallets; and up-stacking/down-stacking freight.
Manage freight flow by moving, scanning, and handling freight manually and/or with power equipment.
Provide basic maintenance to equipment (e.g., clean, inspect).
Live our Values
Culture Champion
• Models the Walmart values to foster our culture; holds oneself accountable; and supports Walmart’s commitment to communities, social justice, corporate social responsibility, and sustainability; maintains and promotes the highest standards of integrity, ethics and compliance.
Servant Leadership
• Is consistently humble, self-aware, honest, and transparent.
Embrace Change
Curiosity & Courage
• Demonstrates curiosity and a growth mindset; supports innovation and intelligent risk-taking; and exhibits resilience in the face of setbacks.
Digital Transformation & Change
• Implements and supports continuous improvements and willingly embraces new digital tools and ways of working.
Deliver for the Customer
Customer Focus
• Delivers results while putting the customer first and applying an omnimerchant mindset and the EDLP and EDLC business models to all plans.
Strategic Thinking
• Adopts a broad perspective that considers data, analytics, customer insights, and different parts of the business when making plans.
Focus on our Associates
Diversity, Equity & Inclusion
• Embraces diversity in all its forms and actively supports diversity of ideas and perspectives, as well as diversity goal programs.
Collaboration & Influence
• Builds strong and trusting relationships with team members and business partners; works collaboratively to achieve objectives; communicates with
impact to a range of audiences; and demonstrates energy and positivity for own work.
Talent Management
• Contributes to an environment allowing everyone to bring their best selves to work, demonstrates engagement and commitment to the team, and recognizes others’
contributions and accomplishments.

Minimum Qualifications...

Outlined below are the required minimum qualifications for this position. If none are listed, there are no minimum qualifications.

Preferred Qualifications...

Outlined below are the optional preferred qualifications for this position. If none are listed, there are no preferred qualifications.

Primary Location...

Role and Responsibilities

Who We Are:

• CAE Vision: Our vision is to be the worldwide partner of choice in defense and security, civil aviation, and healthcare by revolutionizing our customers’ training and critical operations with digitally immersive solutions to elevate safety, efficiency and readiness.
• CAE Defense & Security Mission: CAE's Defense and Security business unit focuses on helping prepare military customers to develop and maintain the highest levels of mission readiness.
• CAE Values: Empowerment, Innovation, Excellence, Integrity and OneCAE make us who we are and we strive to make a difference in the world while helping each other succeed.

Summary

The Planner schedules work in accordance with the program schedule.  Deciphers engineering drawings, engineering release notices and engineering orders to determine proper action such as requesting parts through material planning as needed and building parts in the shops.  Assures schedule adherence and program priorities by having both purchased parts and build parts arrive in time to meet the program schedule.  Provides project support to department managers, group leaders, and staff of Hardware Integration and Deployment. Maintains communication with program management, project technicians, production coordinators/planners, material planning, and support departments (such as Mechanical and Electrical Deployment) to monitor the status of product delivery.  Might assist other planners in resolving problems with late deliveries and recovery plans for projects.

Essential Duties and Responsibilities

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Enters data into various Hardware Deployment databases
• Evaluates due dates to ensure they align with schedule need dates
• Prepares the necessary documentation for items being shipped out of plant
• Orders necessary tools and parts needed by the hardware deployment group.
• Extracts various reports from Cognos, JIRA, Costpoint, and/or other reporting systems to evaluate priorities
• Keeps data integrity in Costpoint as it relates to MRP
• Maintains operational reports that successfully reflect and aid key project and operational goals.
• Keeps the work order database updated and accurate
• Coordinates with material planning and/or purchasing to acquire needed parts for projects
• Understanding of the bill of materials (BOM) along with a solid knowledge of part numbers and CAE USA Inc. part number philosophy.
• Interfaces continuously with other planners to determine changes to existing orders/plans on projects
• Familiarization with engineering change notices (ECN), work order system, log system, and other CAE specific software tools.
• Analyzes ECN’s on a daily basis
• Maintain inventory integrity of the storerooms using the database
• Ability to perform work assignments with minimal supervision
• Sound knowledge and understanding of production control and manufacturing processes
• Provides guidance to less experienced co-workers

Qualifications and Education Requirements

• Two years’ certificate from college or technical school or equivalent combination of education and experience
• Experience in similar environment or related field required
• Must have knowledge of Microsoft Office Suite
• Must possess intermediate level Excel skills
• Must be detail oriented
• Must be computer literate
• Must possess strong customer service skills and the ability to work with internal and external customers.

Language Skills

Excellent written and verbal communication skills

Mathematical Skills

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.  Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

Reasoning Ability

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.  Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Security Responsibilities

Must comply with all company security and data protection / usage policies and procedures.  Personally responsible for proper marking and handling of all information and materials, in any form. Shall not divulge any information, or afford access, to other employees not having a need-to-know. Shall not divulge information outside company without management approval.  All government and proprietary information will be accessed and stored electronically on company provided resources.

•  Incumbent must be eligible for DoD Personal Security Clearance.

Work Environments

• Able to work in a regular office environment.
• ABLE TO WORK TO A FLEXIBLE SCHEDULE AND OVERTIME AS REQUIRED.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Ability to operate a personal computer. 

Communicate via e-mail/telephone. 

Ability to work overtime as required.

Must be able to lift 20 lbs.

Ability to see clearly at close range. 

Other Duties 

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for their job. Duties, responsibilities, and activities may change at any time with or without notice. 

CAE USA Inc. is an EOE/AA employer and gives consideration for employment to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you’d like more information about your EEO rights as an applicant under the law, please click here Know Your Rights: Workplace Discrimination is Illegal. 

PAY TRANSPARENCY NONDISCRIMINATION PROVISION The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 

Position Type

CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.

Equal Employment Opportunity

At CAE, everyone is welcome to contribute to our success. With no exception.

As captured in our overarching value "One CAE", we’re proud to work as one passionate, boundaryless and inclusive team.

At CAE, all employees are welcome regardless of race, nationality, colour, religion, sex, gender identity or expression, sexual orientation, disability, neurodiversity or age.

At Five Below our growth is a result of the people who embrace our purpose: We know life is way better when you are free to Let Go & Have Fun in an amazing experience, filled with unlimited possibilities, priced so low, you can always say yes to the newest, coolest stuff! Just ask any of our over 17,000 associates who work at Five Below and they’ll tell you there’s no other place like it. It all starts with our purpose and then, The Five Below Way, which is our values and behaviors that each and every associate believes in.

It’s all about culture at Five Below, making this a place that can inspire you as much as you inspire us with big ideas, super energy, passion, and the ability to make the workplace a WOWplace!

Job Responsibilities:

• Locate all physical locations.
• Load and unload shipments safely and move product to assigned locations or containers.
• Efficiently stack and store the merchandise in the appropriate areas.
• Ensure inbound and outbound shipments are accurate and free of damage. Report quality variances.
• Use RF Gun for picking, receiving, put-away, replenishments and load functions, as required.
• Maintain the facility’s equipment and materials in a neat, clean, and orderly fashion.
• Inspect the equipment to insure properly functioning daily.
• Communicate and interact with manager to rectify problems, such as damages, shortages, and nonconformance to specifications.
• Ability to add, subtract, multiply, and divide in all units of measure, use of calculator helpful
• Ability to maintain proper staging, label placement etc…

MUST-HAVE QUALIFICATIONS

• Stand Up Reach Truck or Forklift Experience, 1 Year Minimum
• Operate all equipment in a safe and efficient manner following prescribed work methods
• Knowledge of physical inventory process helpful
• Strong work ethic
• Ability to apply common sense understanding to carry out detailed written or oral instructions
• Must be able to prioritize and work in a fast-paced atmosphere while maintaining a high degree of flexibility
• Ability to work flexible hours and work an alternate shift for an extended period of time with limited notice
• Ability to stand, stoop, lift and perform manual dexterity
• Lift up to 50-pound boxes, and remain on feet for entire shift
• Ability to ascend staircases and perform standing work on an elevated platform
• Ability to work while being exposed to cold temperatures in the winter and hot temperatures in the summer
• Ability to perform additional duties as assigned as well as support other departments on an as needed basis

If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

Five Below is an Equal Opportunity Employer.

Position Type:

BE AWARE OF FRAUD! Please be aware of potentially fraudulent job postings or suspicious recruiter activity by persons that are posing as a Five Below recruiters. Please confirm that the person you are working with has an @fivebelow.com email address. Additionally, Five Below does NOT request financial information or payments from candidates at any point during the hiring process. If you suspect fraudulent activity, please visit Five Below’s Careers Site at www.fivebelow.com/info/careers to verify the posting.

Why Patients Need You

Everything we do, every day, is in line with an unwavering commitment to the quality and the delivery of safe and effective products to patients. Our science and risk-based compliant quality culture is innovative and customer oriented. Whether you are involved in manufacturing, testing, or compliance, your contribution will directly impact patients.

What You Will Achieve

Responsible for planning and coordinating various Manufacturing activities with Process Engineers, Supervisors, and Managers involving multiple site Manufacturing departments.

Duties include managing Manufacturing cGMP documentation system, planning and scheduling batch/buffer activities to support multiple clinical/commercial Manufacturing operations, project manage special projects and manage cGMP sampling plans to support clinical/ commercial programs, products, and projects. Acts as a department liaison between Quality Assurance (QA), Technical Operations, and Site Engineering and Maintenance in planning of batch/buffer preparation, managing cGMP documentation, creation and management of cGMP sampling plans, and equipment maintenance activities involving multiple Manufacturing departments.  Proficient at maintaining Manufacturing inventory for consumable items and orders essential non-standard production items using Pfizer enterprise systems.

How You Will Achieve It

• Lead and manage batch/buffer preparation activities to support clinical/commercial Manufacturing involving multiple areas/products. 

• Utilize automated systems to plan and monitor production activities (LIMS, Delta V, MES, SAP). 

• Interface with management and team leads across Manufacturing departments and Technical Operations to optimize Manufacturing operations schedule based on upstream/downstream processing requirements, equipment, and staffing constraints.

• Re-prioritize and schedule production activities when unplanned disruptions occur in 24x7 operations. 

• Decisions must be timely and minimize disruptions to multiple clinical and commercial biologics production areas with limited/shared resources.

• In addition, responsible to lead/facilitate the weekly production planning meeting to ensure the day to day operational plan is communicated and successfully executed. 

• Proactively identify and escalate to senior management unplanned programs and projects that disrupt planned production activities in multiple vaccine programs.

• Coordinate the issuance, tracking, and review of batch records and other controlled documents to ensure target product-based cycle times are met.  Complete batch scaling calculations in master batch records and author cGMP documents as required to meet plan of record.  Strong understanding of cGMPs to assist in the review of Manufacturing records for completeness and accuracy.  Support programs and projects that require Manufacturing input/resources. 

• Prepare and place purchase orders for supplies and materials necessary for Manufacturing.  Resolve invoice, receiving problems, and expediting of orders.  Manage and optimize IMEx systems that impact consumables/disposables required for clinical and commercial Manufacturing operations. 

• Lead and manage projects and programs that impact production plan of record as assigned by management.  Upon assignment of the project/objective, develop an action plan/schedule, present updates, implement, and verify achievement of project objective.

• Train and develop new Manufacturing Planners in area of expertise. Demonstrate proficiency in other Manufacturing areas to backfill and support based on business needs.

Qualifications

Must-Have

• Applicant must have HS Diploma with 6 years of relevant experience; OR an Associate's degree with 4 years of experience; OR a Bachelor's degree with 0-2 years of experience

• Experience with quality records (i.e., batch records, procedures, forms, etc.)

• Work independently as well as in team environment

• Strong communication skills

• Planning and coordinating various Manufacturing activities across multiple areas

• Maintaining Manufacturing inventory for consumable items

• Operations planning and scheduling experience (SAP, Microsoft Project, Word and Excel)

• Purchasing experience

• Mathematical calculating

​

Nice-to-Have

• Perform complex data analysis with Process Engineers and/or Managers

• Project Management  

Physical/Mental Requirements

• Lifting of boxes

• Traveling between buildings on the Sanford campus

Non-Standard Work Schedule, Travel, or Environment Requirements

• This role is standard day Monday through Friday work shift; some off-shift support needed when issues arise.

Other Job Details

• Last day to Apply: March 25th, 2024

• Eligible for Employee Referral Bonus: NO

• Eligible for Relocation Assistance: NO

Work Location Assignment: On Premise

Relocation assistance may be available based on business needs and/or eligibility.

POSITION SUMMARY: 

2nd Shift 1PM-9:30PM

The Production Lead Coordinator, Manufacturing is required to perform multiple functions within all work streams of the manufacturing plant, including the ability to perform all functions of the Production Operator, Manufacturing. Primarily, the Production Lead Coordinator, Manufacturing will coordinate and monitor all production, quality, and shipping processes. The Production Lead Coordinator, Manufacturing is responsible for providing the production team members with print ready files and order details to ensure Done Right and On Time production output. The Production Lead Coordinator, Manufacturing will assist the Assistant Manager, Manufacturing, in managing, monitoring, and facilitating production processes in all work streams.

GENERAL DUTIES AND RESPONSIBILITIES:

(This is a representative list of the general duties the position may be asked to perform, and is not intended to be all-inclusive)

• Intake, track and log production jobs for all work streams
• Provide print ready production files and complete order details
• Provide order scheduling and routing information to Production team members
• Ensure adequate inventory is available to produce requested orders
• Responsible for ensuring quality during and after production process
• Ensure cross shift communication
• Coordinate shipping of all customer orders
• Provide customer service, including anticipating needs, suggesting alternatives and problem-solving customer solutions, with a minimum amount of supervision
• Assist in the training of plant team members
• Collate, sort and organize customer orders
• Follow instructions of supervisors and assist other team members in performing plant functions
• All other duties as needed or required

MINIMUM QUALIFICATIONS AND REQUIREMENTS:

• High school diploma or equivalent education
• Bachelor’s degree preferred
• 2+ years of high-volume manufacturing or quality control experience
• Prior experience of FXO products & services offerings preferred
• Commercial print environment experience preferred
• For new hires, must meet all FedEx Office employment qualifications in force at time of hiring
• For current FedEx Office team members, must meet hiring criteria for the position and transfer requirements as outlined in the Team Member Handbook

ESSENTIAL FUNCTIONS:

• Ability to stand during entire shift, excluding meal and rest periods
• Ability to move and lift 55 pounds
• Ability, on a consistent basis, to bend/twist at the waist and knees
• Ability to communicate effectively with customers, vendors, and other team members
• Ability, on a consistent basis, to perform work activities requiring cooperation and instruction
• Ability, on a consistent basis, to function in a fast-paced environment, under substantial pressure
• Ability, on a consistent basis, to maintain attention and concentration for extended periods of time
• Ability to work with minimal supervision
• Ability, on a consistent basis, to report regularly to work and maintain established business hours in order to support the FedEx Office business; regular attendance and/or reporting could include regular attendance at a physical location and/or maintaining established business hours depending on the scope and nature of the position

Quality Driven Management (QDM)

• (Quality Driven Management strives to deliver market-leading customer experience, business excellence, and financial return through a Quality-oriented culture and day-to-day application of Quality science.)
• Suggests areas for improvement in internal processes along with possible solutions
• Works with management to reduce company costs/wastes, and to optimize profitability in areas of responsibility
• Applies Quality concepts presented at training during daily activities
• Supports FedEx Office Quality initiatives

EEO Statement
 

FedEx Office is an equal opportunity employer and prohibits discrimination and harassment against any employee or applicant  on the basis of race, color, religion, national origin, citizenship, genetic information, age (except for bona fide occupational qualifications), sex, pregnancy (including childbirth or a related medical condition), disability, sexual orientation, gender identity, gender expression, marital status, military leave or service, status as a disabled veteran or other covered veteran status, participation in EEO protected activity, any other status protected by federal, state, or local law, or association with a person on the basis of one or more of the foregoing. America’s Military Veterans and individuals with disabilities are strongly encouraged to apply.

FedEx Office will provide reasonable accommodations to qualified individuals with disabilities, including throughout the application and hiring process, if requested. Applicants who require reasonable accommodations in the application or hiring process should email HR.Recruiting@fedex.com.

FedEx Office will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the San Francisco Fair Chance Ordinance, the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, and the New York City Fair Chance Act. The existence of a criminal record is not an automatic or absolute bar to employment and a candidate’s criminal record will be considered individually based on factors such as the relationship between the job sought and the criminal offense, the timing of the offense, the nature of the offense, and any other relevant information. If you are applying in Philadelphia, PA, you can click here to learn about Philadelphia's fair chance hiring law.

For more information, click here.

What Assembly contributes to Cardinal Health

Manufacturing is responsible for cost of production and maintenance activities including process improvement, supply chain management, quality assurance, employee safety and engagement, and environmental commitment.

Performs a variety of tasks ranging from repetitive to non-repetitive production to put together component parts to make assemblies, sub-assemblies or completed units, using standard operating procedures. May conduct quality inspections on processing line in accordance with quality specifications.

Job Summary

The Associate I, Assembly plays a key role in the assembly process of products including the verification of components and compliance with quantity and quality standards. The Associate I, Assembly conducts quality inspections on the assembly line in accordance with quality specifications, reports defects and investigates the route cause. This job operates equipment that packages materials or products by inserting them into containers or filling containers from spouts or chutes. The Associate I, Assembly tasks are performed in accordance with applicable safety guidelines, as well as appropriate processing standards.

Responsibilities

• Sets up workstations as directed by Captain/Designee while complying with all GMP’s, policies, procedures, and safety rules.
• Assembles product packages per DHR, special instructions, and video imaging.
• Verifies components in the assembly process to ensure proper selection and that quality and quantity standards are met.
• Inspects components for debris, and or any other potential quality defect and reports defects as needed to management and the quality team.
• Performs duties in compliance with all safety rules and regulations required by the Company, Local, and State and Federal provisions.
• Complies with the NCI & Defect Investigation Form process to ensure proper management and resolution of quality issues.

Qualifications

• 0-1 years of experience, preferred.
• High School Diploma or GED, preferred.

What is expected of you and others at this level

• Applies basic skills and techniques to complete routine tasks within assigned area
• Maintains appropriate licenses, training and certifications
• Works on basic and routine assignments
• Works within clearly defined Standard Operating Procedures and/or scientific methods
• Adheres to all quality guidelines
• Works under close supervision
• All work is reviewed for accuracy
• Any deviations from the norm are approved by the supervisor before proceeding

Anticipated hourly range: $10.80 - 20.10 USD per hour (+ $1.25/hour shift differential)

Bonus eligible: No

Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being.

• Medical, dental and vision coverage
• Paid time off plan
• Health savings account (HSA)
• 401k savings plan
• Access to wages before pay day with myFlexPay
• Flexible spending accounts (FSAs)
• Short- and long-term disability coverage
• Work-Life resources
• Paid parental leave
• Healthy lifestyle programs

Application window anticipated to close: 4/12/2024 *if interested in opportunity, please submit application as soon as possible.

Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply.

Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

To read and review this privacy notice click here

What Assembly contributes to Cardinal Health

Manufacturing is responsible for cost of production and maintenance activities including process improvement, supply chain management, quality assurance, employee safety and engagement, and environmental commitment.

Performs a variety of tasks ranging from repetitive to non-repetitive production to put together component parts to make assemblies, sub-assemblies or completed units, using standard operating procedures. May conduct quality inspections on processing line in accordance with quality specifications.

Job Summary

The Associate I, Assembly plays a key role in the assembly process of products including the verification of components and compliance with quantity and quality standards. The Associate I, Assembly conducts quality inspections on the assembly line in accordance with quality specifications, reports defects and investigates the route cause. This job operates equipment that packages materials or products by inserting them into containers or filling containers from spouts or chutes. The Associate I, Assembly tasks are performed in accordance with applicable safety guidelines, as well as appropriate processing standards.

Shift Details

• 3:00 pm to 11:00 pm Monday through Friday

Responsibilities

• Sets up workstations as directed by Captain/Designee while complying with all GMP’s, policies, procedures, and safety rules.
• Assembles product packages per DHR, special instructions, and video imaging.
• Verifies components in the assembly process to ensure proper selection and that quality and quantity standards are met.
• Inspects components for debris, and or any other potential quality defect and reports defects as needed to management and the quality team.
• Performs duties in compliance with all safety rules and regulations required by the Company, Local, and State and Federal provisions.
• Complies with the NCI & Defect Investigation Form process to ensure proper management and resolution of quality issues.

Qualifications

• 0-1 years of experience, preferred.
• High School Diploma or GED, preferred.

What is expected of you and others at this level

• Applies basic skills and techniques to complete routine tasks within assigned area
• Maintains appropriate licenses, training and certifications
• Works on basic and routine assignments
• Works within clearly defined Standard Operating Procedures and/or scientific methods
• Adheres to all quality guidelines
• Works under close supervision
• All work is reviewed for accuracy
• Any deviations from the norm are approved by the supervisor before proceeding

Anticipated hourly range: $10.80 - 20.10 USD per hour (+ $0.20/hour shift differential)

Bonus eligible: No

Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being.

• Medical, dental and vision coverage
• Paid time off plan
• Health savings account (HSA)
• 401k savings plan
• Access to wages before pay day with myFlexPay
• Flexible spending accounts (FSAs)
• Short- and long-term disability coverage
• Work-Life resources
• Paid parental leave
• Healthy lifestyle programs

Application window anticipated to close: 4/12/2024 *if interested in opportunity, please submit application as soon as possible.

Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply.

Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

To read and review this privacy notice click here

Job Title

Job Description Summary

Job Description

Salary: $27 - $30/hour

Location: Ottowa, ON

What you need to succeed:

• Stationary Engineer Class is an asset.

• Enrolled in SMA or SMT (BOMA) or Stationary Engineer 4th-B Class; Stationary Engineer 4th-A Class an asset.

• High School Diploma required.

• Building technician certificate and/or instrumentation and control certificate.

• Experience in physical plant operations, HVAC, and other related equipment, preferably in an office building or mixed-use environment.

• Thorough knowledge of general maintenance procedures, current technology, electrical/mechanical systems, and blueprint reading & comprehension.

• Proven mechanical abilities.

Job Description:

• Perform troubleshooting and repairs required for the maintenance and upkeep of equipment such as, but not limited to, replace belts and filters, lubrications, minor part replacement and troubleshooting of minor mechanical/electrical in adherence with local electrical fire and safety codes to maintain equipment in good working order and limit the opportunity for incurring major repair bills.

• Secure Bayshore Shopping Centre property against loss due to theft, fire, liability claims and prosecutions resulting from operations by ensuring all health, safety and security procedures are adhered to and areas of concern are reported to the appropriate parties in a timely manner to limit exposure to liability and loss.

• Monitor central plant including auxiliary and related equipment and water treatment by checking all major mechanical controls confirming they are in good working order to ensure a comfortable environment for clients.

• Inspect all central equipment and Life Safety equipment, which includes testing of fire protection devices and auxiliary/emergency power systems on a regular basis and report any problems or unusual findings to supervisor to minimize damage and cost of repair to all building equipment. Test fuel systems as well.

• Respond to clients’ concerns regarding HVAC, electrical, plumbing, and general repair issues by solving problems or making recommendations as required to reduce repair costs and ensure a high level of customer service to clients.

• General maintenance of all site mechanical, electrical, and HVAC systems, such as but not limited to chillers, boilers, heat pumps, air conditioners, emergency generators, induction units, VAV systems.

• Report and log keeping of mechanical systems on a daily, weekly, monthly, and annual basis as required.

• Other duties as assigned.

What your strengths are:

• Strong communicator, verbal and written.

• A great teammate with strong interpersonal skills.

• Great problem-solver with practical judgment.

• Excellent and efficient customer service orientation.

• Positive and willing to work overtime and respond to emergencies.

• Works efficiently under pressure.

Greif offers a great working environment and the opportunity to make an immediate impact at a company where your ideas are always welcome.

Job Requisition #:

Job Description:

EEO Statement:

https://www.greif.com/wp-content/uploads/2023/04/HR-101-Equal-Employment-Opportunity-Policy-English.pdf

We offer a competitive salary, excellent benefits and opportunity for growth. Greif, Inc. is an equal opportunity employer. We will not discriminate against any applicant or employee on the basis of sexual orientation, gender identity, race, gender, religion, age, national origin, color, disability, or veteran status. EOE/Minority/Female/Disabled/Veteran. For more information read Greif’s Equal Opportunity Policy.

Job Description Summary

Job Description

We are the makers of possible 

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities. 

We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you’ll be supported to learn, grow and become your best self. Become a maker of possible with us. 

JOB SUMMARY:
The Quality Manufacturing Representative’s primary functions are to assure manufacturing operations meet the quality system requirements, product is released to sterilization and shipping after review of documentation and assisting Quality engineers with quality issues. This position will also provide training, guidance, and input on quality issues to the manufacturing floor. This position will also audit compliance to the quality policy and procedures. The incumbent will participate in continuous improvement and other plant initiatives as needed in support of business goals. This position reports directly to a Quality Engineer.

HOURS: 7AM - 7PM

ESSENTIAL FUNCTIONS:  

• Performs review of manufacturing documentation

• Releases product to the next stage of manufacturing or shipping

• Follows up on manufacturing issues with appropriate parties

• Perform complete inspection of product according to applicable specifications

• Reports issues to the Quality Engineers and assist as needed with quality related issues

• Document all inspections as required

• Update all reports and databases as required for reporting and tracking purposes

• Possess knowledge of Quality System Regulations

• Ensure manufacturing associates are properly trained using documented inspection techniques

• Must perform duties and maintain knowledge to conduct inspections and tasks among all manufacturing/molding departments

• Apply and interpret ANSI Z1.4 and other sampling plans for predicting percent defective and lot acceptance criteria

• Conduct routine product and process audits to assure compliance to the quality system.

• Maintain a clean and safe work environment

• Hold self-accountable to follow all safety policies & procedures

• Good Manufacturing Practices

• Perform all other miscellaneous duties as appropriately directed by Quality Management

REQUIREMENTS:

• HS diploma/GED

• Proficient at reading / writing English

• Good attention to detail

• Ability to give/receive feedback

• Team player able to work well with others

• Plan / Organize tasks based on priority and timelines

• Take initiative (see what needs to be done and do it)

• On the job training provided, however, but be a rapid learner

For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.

Why Join Us?

A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.  

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place.  

To learn more about BD visit https://bd.com/careers 

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status. 

Primary Work Location

Additional Locations

Work Shift

What Assembly contributes to Cardinal Health

Manufacturing is responsible for cost of production and maintenance activities including process improvement, supply chain management, quality assurance, employee safety and engagement, and environmental commitment.

Performs a variety of tasks ranging from repetitive to non-repetitive production to put together component parts to make assemblies, sub-assemblies or completed units, using standard operating procedures. May conduct quality inspections on processing line in accordance with quality specifications.

Job Summary

The Associate I, Assembly plays a key role in the assembly process of products including the verification of components and compliance with quantity and quality standards. The Associate I, Assembly conducts quality inspections on the assembly line in accordance with quality specifications, reports defects and investigates the route cause. This job operates equipment that packages materials or products by inserting them into containers or filling containers from spouts or chutes. The Associate I, Assembly tasks are performed in accordance with applicable safety guidelines, as well as appropriate processing standards.

Responsibilities

• Sets up workstations as directed by Captain/Designee while complying with all GMP’s, policies, procedures, and safety rules.
• Assembles product packages per DHR, special instructions, and video imaging.
• Verifies components in the assembly process to ensure proper selection and that quality and quantity standards are met.
• Inspects components for debris, and or any other potential quality defect and reports defects as needed to management and the quality team.
• Performs duties in compliance with all safety rules and regulations required by the Company, Local, and State and Federal provisions.
• Complies with the NCI & Defect Investigation Form process to ensure proper management and resolution of quality issues.

Qualifications

• 0-1 years of experience, preferred.
• High School Diploma or GED, preferred.

What is expected of you and others at this level

• Applies basic skills and techniques to complete routine tasks within assigned area
• Maintains appropriate licenses, training and certifications
• Works on basic and routine assignments
• Works within clearly defined Standard Operating Procedures and/or scientific methods
• Adheres to all quality guidelines
• Works under close supervision
• All work is reviewed for accuracy
• Any deviations from the norm are approved by the supervisor before proceeding

Anticipated hourly range: $10.80 per hour - $20.10 per hour

Bonus eligible: No

Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being.

• Medical, dental and vision coverage
• Paid time off plan
• Health savings account (HSA)
• 401k savings plan
• Access to wages before pay day with myFlexPay
• Flexible spending accounts (FSAs)
• Short- and long-term disability coverage
• Work-Life resources
• Paid parental leave
• Healthy lifestyle programs

Application window anticipated to close: 3/22/2024 *if interested in opportunity, please submit application as soon as possible.

Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply.

Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

To read and review this privacy notice click here

Job Description Summary

Job Description

We are the makers of possible 

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities. 

We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you’ll be supported to learn, grow and become your best self. Become a maker of possible with us. 

Resume is required.

Job Grade: JG1-H07

PCP Level: 3

Shift: 6:00 p.m. - 6:00 a.m. | Rotating Nights | B Shift

ESSENTIAL FUNCTIONS

• Needle Packaging Set-up Operators will be responsible for production on their designated lines as well as maintaining machine runtime and performing some mechanical repairs. 

• They may be trained on any of the processes or lines in the department to help fill production needs, but will have an assigned focus area to build expertise. 

• They may perform visual inspections as well as assembly or packaging operations. 

• Will be responsible for achieving production rate and quality goals on assigned equipment. 

• May require the use of 10x microscopes, calipers, and/or other miscellaneous gauges. 

• May be required to perform SAP data entries.  Perform changeovers and line clearances. 

• Help maintain inventory of spare parts and prepare for upcoming work on the lines. 

• Must be willing to troubleshoot machines and help identify methods to increase efficiency of the lines. 

• Informal leader of their respective line and responsible for ensuring quality of the product they produce.

RESPONSIBILITIES

• Achieving established production goals

• Ensuring the quality of all product produced

• Performing quality checks as designated Ability to function as part of a team

• Perform changeovers and line clearances

• Ensure assigned equipment is maintained and in working order

• Processing SAP and MES transactions for department

• Assisting in the BDA process to identify root causes

• Perform duties in accordance with GMP principles

• Maintain compliance with all required document training

• Operate safely each day including usage of proper PPE Other duties as assigned

• Operate lines in a safe and efficient manner

• Submit at least the minimum number of required Kaizens annually

• Drive department results by reducing downtime and completing tasks in an efficient manner

• Maximize efficient time usage in the department

• Continuous learning of the processes and mechanics of the lines

QUALIFICATIONS AND REQUIREMENTS

Minimum Education:  

• Must have High School Diploma/GED

Minimum Experience: 

• Prefer a working knowledge of machines and troubleshooting.

Minimum Knowledge, Skills, or Abilities (KSA’s): 

• Problem solving/decision making.

• Computer skills (Microsoft Office).

• Oral and written communication skills.

• Regular, punctual attendance required.

• Ability to read, write, and speak English.

For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.

At BD, we strive to make healthcare a priority for our associates and their families. We have a variety of plans including a new HSA Basic plan option with Cigna.

• $0 payroll contributions if your salary is below $50,000

• Plan covers 100% preventative care (annual wellness exam, and immunizations)

• Visit any provider

If you meet the eligibility and enrollment requirements, your coverage begins on your date of hire or the date you become a benefits-eligible associate.

BENEFITS:

BD provides comprehensive total rewards benefits for all of its employees. Most benefits start on day 1 of your employment with BD.

• Competitive pay

• Up to 6 weeks of paid parental leave

• Medical, dental, and vision insurance plans

• Education assistance ($5250.00 per year)

• Adoption assistance

• 401K plan with $.75 of every dollar matched up to 6% of compensation

• Basic life and AD&D provided

• Discounted home, auto, and pet insurance plans

• Paid holidays and vacation (pro-rated the first year based on actual start date)

Excited to grow your career?

We value our talented employees, and whenever possible strive to help one of our associates grow professionally before recruiting new talent to our open positions. If you think the open position you see is right for you, we encourage you to apply!

Our people make all the difference in our success.

Why Join Us?

A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place. 

To learn more about BD visit https://bd.com/careers

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

Primary Work Location

Additional Locations

Work Shift

At Dow, we believe in putting people first and we’re passionate about delivering integrity, respect and safety to our customers, our employees and the planet.  

Our people are at the heart of our solutions. They reflect the communities we live in and the world where we do business. Their diversity is our strength. We’re a community of relentless problem solvers that offers the daily opportunity to contribute with your perspective, transform industries and shape the future. Our purpose is simple - to deliver a sustainable future for the world through science and collaboration. If you’re looking for a challenge and meaningful role, you’re in the right place. 

About You and This Role

Dow has multiple job openings for Distribution Operators at the Freeport, Texas location. 

The Freeport site has 3,500 + employees and is a 24-hour/7-day operation including holidays. Dow is looking for technically capable Distribution Operators who embrace change, adapt quickly and possess self-confidence with leadership skills.

You will work in a unionized environment. And you are a key component to the success of Texas Operations. Site logistics is responsible for the safe and efficient transportation of the many products to our customers.  

Dow actively searches for responsible individuals to perform the duties listed below:

Responsibilities

• Load and unload product to and from rail cars, totes, tank trucks, ships, drums and other modes of transportation.
• Troubleshoot, analyze and resolve technical issues within the plant.
• Monitor tank levels and flow rates to ensure smooth transition of products.
• Fill out and process necessary paper work pertinent to the job.
• Operate pumps, valves, and other mechanical equipment.
• Train new distribution operators and educate team members.

Qualifications

• A minimum of a High School Diploma or GED is required.
• Ability to work a rotating shift.
• Must be 18 years old or older.
• Must have a current, valid, United States driver license to drive 4 wheel carts and company vehicles throughout the site.
• A minimum requirement for this U.S. based position is the ability to work legally in the United States.  No visa sponsorship/support is available for this position, including for any type of U.S. permanent residency (green card) process.

Preferred Skills

• Experience in industrial manufacturing.
• Loading or unloading experience.
• Military experience.
• Good work history.

Additional Notes

• Work overtime and holidays as needed and the ability to work according to the necessary schedule to meet job requirements with or without reasonable accommodation is an essential function of this position.
• This position does not offer relocation assistance.

Physical Demands

• Wear safety equipment, such as earplugs, goggles, and steel-toed shoes.
• Wear and use respirators.
• Perform frequent bending, reaching, and lifting.
• Work in tight or closed-in spaces.
• Climb stairs/ladders and work high off the ground.
• Stand or walk for extended periods of time.
• Frequent lifting of material weighing approximately 55 lbs.
• Ability to work comfortably and safely at elevated heights. Candidates must be familiar with, or willing to undergo training in, the proper usage and maintenance of safety equipment to ensure safe movement and operations at heights.

To Apply

• Sign in or create your account
• Make sure your resume is accessible. Easily link your LinkedIn Profile to load your resume when logging into apply.
• What can we accomplish together? Apply to find out!

Benefits – What Dow offers you 

We invest in you. 

Dow invests in total rewards programs to help you manage all aspects of you: your pay, your health, your life, your future, and your career.  You bring your background, talent and perspective to work every day. Dow rewards that commitment by investing in your total wellbeing.  

Here are just a few highlights of what you would be offered as a Dow employee: 

• Equitable and market-competitive base pay and bonus opportunity across our global markets, along with locally relevant incentives. 
• Benefits and programs to support your physical, mental and emotional well-being, to help you get the care you need...when you need it. 
• Competitive retirement program that may include company-provided benefits, savings opportunities, financial planning and educational resources to help you achieve your long term financial-goals. 
• Become a Dow shareholder through various employee stock programs.
• Opportunities to learn and grow through training and mentoring, work experiences, community involvement and team building. 
• Workplace culture empowering role-based flexibility to maximize personal productivity and balance personal needs. 
• Global Paid Time Off (PTO) policies:
  • Paid time off for new parents (birthing and non-birthing, including adoptive and foster parents).  
  • ​Paid time off to care for family members who are sick or injured.  
  • Paid time off to support volunteering and Employee Resource Group’s (ERG) participation. 

Join our team, we can make a difference together. 

About Dow

Dow (NYSE: DOW) is one of the world’s leading materials science companies, serving customers in high-growth markets such as packaging, infrastructure, mobility and consumer applications. Our global breadth, asset integration and scale, focused innovation, leading business positions and commitment to sustainability enable us to achieve profitable growth and help deliver a sustainable future. We operate manufacturing sites in 31 countries and employ approximately 35,900 people. Dow delivered sales of approximately $45 billion in 2023. References to Dow or the Company mean Dow Inc. and its subsidiaries. ​​​​Learn more about us and our ambition to be the most innovative, customer-centric, inclusive and sustainable materials science company in the world by visiting www.dow.com.

As part of our dedication to the diversity of our workforce, Dow is committed to equal opportunities in employment.  We encourage every employee to bring their whole self to work each day to not only deliver more value, but also have a more fulfilling career. Further information regarding Dow's equal opportunities is available on www.dow.com.