Total 2,037 Maintenance / Repair job vacancies

Job scope as follows:

• Candidate are required to execute and perform project or service coordination on assignment basis at customer premises.
• Provide troubleshooting, diagnosis & repairing works on of fluid handling equipment and mechanical rotating related equipment.
• Generate and issue troubleshooting, diagnosis and service report to customer.
• Follow up and obtain approval from customer to execute repair and service activities.
• Assist and pre-arrangement with customer’s for field service activities.

Requirement:

• Candidate with general understanding of mechanical, piping and electrical engineering and fluid handling equipment and experience will be added advantage
• Able to communicate in English / Bahasa and Mandarin
• Possess good customer service with positive mindset.
• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering, Engineering (Industrial), Engineering (Mechanical) or equivalent.
• At least 2 Year(s) of working experience in the related field is required for this position
• Preferably Senior Executive specialized in Engineering - Industrial or equivalent.
• Relevant experience without certificate may also apply.
• With experience in repair and troubleshooting on pumps will be added advantage.
   

Perks & Benefits

• Personal leave
• Open culture
• Personal development opportunities

工作範圍如下：

• 候選人必須根據任務在客戶場所執行和執行專案或服務協調。
• 提供流體處理設備和機械旋轉相關設備的故障排除、診斷和維修工作。
• 產生並向客戶發出故障排除、診斷和服務報告。
• 跟進並獲得客戶批准以執行維修和服務活動。
• 協助並預先安排客戶的現場服務活動。

要求：

• 對機械、管道和電氣工程以及流體處理設備有一般了解和經驗的候選人將獲得額外優勢
• 能夠用英語/印尼語和國語溝通
• 擁有良好的客戶服務和積極的心態。
• 候選人必須至少擁有工程、工程（工業）、工程（機械）或同等學歷的文憑/高級/高級/研究生文憑。
• 該職位需要至少 2 年相關領域的工作經驗
• 最好是工程 - 工業或同等專業的高階主管。
• 沒有證書的相關經驗也可適用。
• 擁有泵浦維修和故障排除經驗將更具優勢。
  

津貼和福利

• 事假
• 開放文化
• 個人發展機會

Support in the management of the contracted maintenance, cleaning, pest control, waste management, security, and landscaping service providers, through their site supervisors to ensure delivery of service according to the Service Level Agreement while effectively managing cost.

1. Supervise contractors / suppliers / vendors related to facilities management
2. Develop and maintain business relationship with contractors and vendors to facilitate ineffective and efficient mall operations.
3. Facilitate coordination for tenants’ fit out works.
4. Monitor procedures and records relating to the mall’s structure, mechanical and electrical maintenance.
5. Ensure all Health, Safety and Environmental statutory obligations and industry best practice procedures and systems are adhered to.
6. Ensure that overall structure and machinery is being effectively and efficiently maintained by third party contractors in accordance with the maintenance schedules and that all records are accurately maintained.
7. Assist in the emergency planning and business continuity plan, reviewing and updating as necessary to ensure optimum effectiveness.
8. Ensure that all accident and incident reporting, including insurance and statutory forms and procedures are correctly completed and adhered to.
9. Supporting the Manager in periodically reviewing the performance of contractors to ensure all standards are being met, reporting of any short comings and proposing further improvement measures.
10. Perform and execute any other duties assigned by your superior and/or Senior Management that may be deemed appropriate to this role

• Diploma or Bachelor’s Degree in mechanical and/or Electrical Engineering
• Candidates with shopping mall experience are preferred

• More than 2 years’ experience in mall operations.
• Good knowledge in: -
  1. HVAC knowledge (Air-conditioning system and Exhaust)
  2. Fire Alarm System
  3. Plumbing System
  4. LPG System

• Have previously worked in similar capacity at shopping malls

• Pro-active
• Good communication and interpersonal skills
• Good listening skills
• Good organizational skills
• Professional outlook
• Self-motivated and enthusiastic
• Ability to work under pressure and meet targets / deadlines
• Good analytical ability
• Good problem-solving skills / ability

Perks & Benefits

• Allowance (transportation, etc.)
• Medical insurance
• Personal development opportunities
• Paid training and development
• Yearly medical claim (family coverage)

Responsibilities:

• Offer service and customer support during field visits or dispatches.
• Connect workflow to schedule.
• Manage all on site installation, repair, maintenance and test tasks.
• Diagnose errors or technical problems and recommend proper solutions.
• Produce timely and detailed service reports.
• Operate vehicle in a safely manner and utilise field automation systems.
• Abide all company's filed procedures and protocols.
• Work with operation team and share information across the organization.
• Comprehend customer requirements and make appropriate recommendations/briefings.
• Build positive relationships with customers.

Requirements:

• Proven field service experience.
• Ability to troubleshoot, test, repair and service technical equipment.
• Ability to work flexible shifts and to adapt to changing work schedules.
• Proficient with mobile tools and applications.
• Possess at least Diploma or higher in IT or any relevant field.

Perks & Benefits

• Commission and bonus
• Allowance (attendance, travel stipends, transportation, etc.)
• Regular team activities
• Medical claim
• Birthday leave

JOB SPECIFICATION & RESPONSIBILITIES

OBJECTIVES

1. To assume full responsibility for the cost-effective operation of the Engineering Department.
2. To prepare the annual and revised Engineering budget in close co-ordination with the Financial Manager and Management, commensurate with operational requirements of the property.
3. To keep accurate records and monitor closely all Engineering budget expenditures, and to ensure that the budget is adhered to and costs strictly controlled.
4. To allocate and countersign all invoices chargeable to the Engineering budget before being processed and charged.
5. To establish an efficient system for the control and verification of all fuel deliveries to the premises.
6. To ensure the repair works being carried out in most economical and effective manner.
7. To supervise closely all engineering personnel in the performance of their duties.
8. To delegate duties and responsibilities, as required, to the Assistant Maintenance Manager.
9. To develop and implement a Comprehensive Preventive Maintenance Programmed for all equipment in the Hotel. 
10. To co-ordinate and, if so requested, supervise special projects and employment of outside contractors.
11. To establish a well-organized Engineering Store and keep close control on consumption of material, stores and inventory control.
12. To implement a comprehensive elevator emergency procedure and initiate employee training on emergency release procedures with the elevator manufacturer’s agent.
13. To advise management on all matters of potential improvement to the operation.
14. To assist the purchasing department with suggestions for the most economic purchase of parts and consumable and to issue clear and concise purchase request for such items.
15. To be knowledge of statutory legislation in employment and industrial relations.
16. To control and monitor closely all utility consumption, and to ensure optimum energy usage by all departments in the Resort.
17. To observe energy efficiency of all equipment, forwarding to management suggestions for replacement of energy inefficient equipment and to report to management all wastage of energy.
18. To assume full charge of building maintenance which includes guest room, public area, kitchen and all back of house. 
19. To establish a regular planned guest room servicing programmed in accordance with industry standards.
20. To supervise major repair and maintenance of Electrical and Mechanical Services.
21. To be fully in charge and responsible for the smooth function of the Department’s administration and maintenance of an efficient filling system.
22. To make sure that all documents related to the operation of the department are being kept up to date, and that all records are correctly maintained and filed.
23. To assume full responsibility for the preparation and timely submittal of all reports.
24. To maintain a comprehensive library of manuals and parts lists of all operational equipment, as well as a complete set of up to date drawings of all areas and systems.
25. To perform an annual evaluation of all Engineering personnel.
26. To ensure that all employee report for duty punctually.
27. To ensure that all employees wear the correct uniform and name tag at all times. 
28. To create an efficient and professional team of employees.
29. To implement department training programmed ensuring the necessary skills of all employees to perform their duties with the maximum efficiency.
30. To ensure that all Engineering staffs are fully familiar with and have a complete understanding of handling Mechanical & Electrical equipment’s.
31. To select and recruit, in conjunction with Human Resource Office, suitable employees for the operation.

OTHER RESPONSIBILITIES

1. Lead, direct and guide in all areas of Engineering matter.
2. Administers the Policies and procedures within the Maintenance department.
3. Follow through all actions required to be carried out by Engineering department. 
4. To monitor and to ensure the preventive maintenance programme being carry out.
5. To supervisor and monitor those works carry out by outside contractor.
6. To follow up & coordinate with purchasing department on delivery and selector of material. 
7. To monitor and to ensure the mechanical and electrical equipments are operating at its optimise manner.

General

1. To perform any other duties that may be assigned from time to time by the Management.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave
• Open culture
• Personal development opportunities
• Paid training and development

Job Description:

• Responsible for scheduling as well as manage corrective and preventive maintenance in the mill.
• Responsible for the quality assurance of the whole product life cycle.
• To identify failures and implement corrective actions and follow-up.
• Oversee inspection and testing of incoming and outgoing product to confirm quality conformance to specifications and quality deliverables.
• Responsible for establishment of effective production process flow in the sense of maximizing the process capability and reject prevention based on real process study.
• Performing audit to the existing manufacturing processes to ensure the smoothness of processes and facilities.

Requirement:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Chemical), and or other related field.
• At least 2 year(s) of working experience in the related field is required for this position. 
• Fresh graduates/Entry level applicants are encouraged to apply.
• Ability to communicate in Mandarin would be a significant advantage as the job required to be able to communicate with China Expatriate.

Perks & Benefits

• Accomodation Benefits
• Medical insurance / GPA
• Annual Leaves / Medical leave
• Paid training and development

職位描述：

• 負責工廠的調度以及管理糾正性和預防性維護。
• 負責產品全生命週期的品質保證。
• 識別故障並實施糾正措施和後續行動。
• 監督進出產品的檢驗和測試，以確認品質符合規格和品質交付成果。
• 負責建立有效的生產流程，在實際製程研究的基礎上最大化製程能力並預防廢品。
• 對現有製造流程進行審核，以確保流程和設施的順利進行。

要求：

• 候選人必須至少擁有工程（化學）和/或其他相關領域的文憑/高級/高級/研究生文憑、學士學位/研究生文憑/專業學位。
• 該職位需要至少 2 年相關領域的工作經驗。
• 鼓勵應屆畢業生/入門級申請人申請。
• 能夠用普通話溝通將是一個顯著的優勢，因為這項工作需要能夠與中國外籍人士溝通。

津貼和福利

• 住宿福利
• 醫療保險/GPA
• 年假/病假
• 有薪培訓和發展

我們正在尋找一位積極主動且注重細節的現場服務技術人員加入我們的團隊。在此職位中，您將在確保我們的實驗室和診斷設備在客戶現場平穩且有效率地運作方面發揮關鍵作用。

職責

• 進行現場安裝、培訓並遵循全面的測試程序，以驗證設備是否安全且正確地運作。
• 提供專家故障排除和維修支持，協助客戶和現場服務團隊快速有效地解決技術問題。
• 按時執行分配的服務任務和維護，確保客戶滿意度並實現銷售目標。
• 維護服務工具和設施遵守法定機構頒布的法規、許可要求和標準等。
• 產生及時、準確的報告和文檔

要求

• 科學領域的最低文憑/高級文憑 - 應用物理/生物醫學/電子/機械工程或同等學歷。
• 熟悉維修、預防性維護和測試、調試方法和儀器。有實驗室或診斷設備經驗者優先。
• 強大的解決問題的能力和對細節的關注。
• 優秀的溝通和客戶服務能力。
• 能夠獨立工作並在團隊環境中工作。
• 必須擁有自己的汽車。能夠前往整個巴生谷和外站。
• 所需語言：馬來語、英語。

好處

• 有吸引力的薪水以及其他報酬，例如津貼、佣金。
• 基於績效的年度獎金和獎勵。
• 支持性和協作性的工作環境。
• 提供培訓和指導。
• 公司活動和旅行。

津貼和福利

• 佣金和獎金
• 津貼（旅費、交通費等）
• 附近的公共交通
• 公司旅行
• 有薪培訓和發展

We are looking for a highly motivated & detail-orientated Field Service Technician to join our team. In this role, you'll play a key part in ensuring our lab and diagnostic equipment runs smoothly and efficiently at customer sites.

Responsibilities

• Perform on-site installations, trainings and follow comprehensive testing procedures to verify equipment is operating safely and correctly.
• Provide expert troubleshooting and repair support, assisting both customers and field service teams to resolve technical issues quickly and effectively.
• Conduct assigned service tasks and maintenance on schedule, ensuring customer satisfaction and meeting sales targets.
• Upkeep of service tools & facilities compliance on regulations, licensing requirement and standard issued by the statutory body etc.
• Generate timely & accurate reports and documentation

Requirements

• Minimum Diploma/Advance Diploma within science field – Applied Physics/Biomedical/ Electronic/Mechanical Engineering or equivalent.
• Good knowledge in repair, preventive maintenance & testing, commissioning methodologies and instruments. Experience with laboratory or diagnostic equipment is a plus.
• Strong problem-solving skills and attention to detail.
• Excellent communication and customer service skills.
• Ability to work independently and in a team environment.
• Must possess own car. Able to travel throughout Klang-valley and Outstation.
• Required language(s): Bahasa Malaysia, English.

Benefits

• Attractive salary with other remunerations such as allowances, commissions.
• Annual Bonus and incentives based on performance.
• Supportive and collaborative work environment.
• Training & Mentorship provided.
• Company Events and Trips.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Nearby public transport
• Company trips
• Paid training and development

We are looking for candidate who willing to work at on-site (variety of customer premise) and able to travel.

This is not FACTORY work.

Office at

1) Tmn Desa Tebrau, Johor

Responsibilities:

• To perform installation and services of Air Ventilator / Exhaust Fan
• To perform installation, services of HVLS Industrial Ceiling Fan
• To perform installation, services of Hand Dryer,
• To in charge for wiring activities
• Repairing the electrical items (Brand - Airegard, Houm)
• To handle scaffolding (work in height)
• Other duties assigned by superior.

Requirement:

• Experience in the related job task is required for this position.
• Experience with any type of HVAC products.
• Have experience in electrical wiring is welcome to apply.
• Willing to travel.
• Have a valid CIDB green card.
• At least have valid Driving License.
• Added advantage if you have a valid GDL License (3 ton)

Perks & Benefits

• Employee equity
• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Medical insurance
• Open culture
• Personal development opportunities

Job Responsibilities:-

• To conduct maintenance service in accordance to allocation by Workshop Team Leader.
• To conduct major maintenance or repair in accordance to respective skill level and training matrix.
• To conduct electrical and mechanical diagnostic troubleshooting.
• To assist Service Advisor in inspection.
• To ensure job carried out using appropriate general mechanic hand tools and special service tools (SST).
• All repair jobs and diagnostic job must have accompanied with print outs from workshop manual.
• To assist Service Manager to do warranty investigation.
• To ensure working area and surrounding with always clean and free from clutter.
• To ensure responsible and good quality job within the MB standards in order to reduce / eliminate any come back jobs.
• To assist in conducting on-site service at customers’ premise/workshop if necessary.
• To attend trainings as and when being assigned by the Service Manager.
• Handle ad-hoc tasks that assigned by supervisor/manager.

Job Requirements:-

• Candidate must possess at least Professional Certificate (e.g SKM Level 1, 2 or 3) or relevant qualification.
• Preferably candidate with minimum 2 year of related working experience.
• Candidate must have basic automotive engineering background.
• Candidate must be able to conduct minor and major service jobs with basic trouble shooting skill.
• Candidate must be able to work closely under a team spirit.
• Candidate must be able to use the basic diagnostic tools and general repair tools in the workshop in order to capture accurate readings and measurement effectively.
• Able to communicate with customers and internal staffs in a professional manner.
• Able to work with minimum supervision and under pressure. (for example: tight deadline)

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave
• Open culture
• Personal development opportunities
• Paid training and development