Total 11 job vacancies by Morson Talent

Are you looking for a new contract?

Our client is looking for an experienced Lead Structural Engineer to be on site once every month in Plymouth.

Rate: £70 PH Inside IR35

See below for a brief on the project:

Understanding of the workings of Nuclear licenced sites.

• Understanding of multi-disciplinary engineering activities through
design, implementation and operation with a core focus on safety.
• Knowledge of Civil/Structural construction techniques employed for
Nuclear Safety related facilities.
• Updating and authoring of technical documentation in support of the
nuclear safety case(s).
• Understanding of the PRS process.

Experience
• The post holder must be able to demonstrate relevant knowledge
and skills required in the technical management of complex
design development throughout the design lifecycle.
• Sound understanding of engineering design and safety practice
as relevant to discipline, post and project requirements.
• Sound project specification & planning experience.
• Sound understanding of Company and departmental procedures
relating to Design, Health & Safety and Quality requirements, and
ability to manage projects in accordance with these procedures.
• Working knowledge of relevant engineering office computer
applications.
• Experience of the design support to construction, operation,
refit/repair of conventional and nuclear submarines and/or
facilities.

Are you looking for a new contract?

Our client is looking for an experienced Lead Structural Engineer to be on site once every month in Plymouth.

Rate is flexible.

See below for a brief on the project:

Understanding of the workings of Nuclear licenced sites.

• Understanding of multi-disciplinary engineering activities through
design, implementation and operation with a core focus on safety.
• Knowledge of Civil/Structural construction techniques employed for
Nuclear Safety related facilities.
• Updating and authoring of technical documentation in support of the
nuclear safety case(s).
• Understanding of the PRS process.

Experience
• The post holder must be able to demonstrate relevant knowledge
and skills required in the technical management of complex
design development throughout the design lifecycle.
• Sound understanding of engineering design and safety practice
as relevant to discipline, post and project requirements.
• Sound project specification & planning experience.
• Sound understanding of Company and departmental procedures
relating to Design, Health & Safety and Quality requirements, and
ability to manage projects in accordance with these procedures.
• Working knowledge of relevant engineering office computer
applications.
• Experience of the design support to construction, operation,
refit/repair of conventional and nuclear submarines and/or
facilities.

Please call 0161 511 9660 to discuss

Job Title: Senior Electrical Designer
Location: PLYMOUTH - 2 Days a week on site the rest is worked remotely
Job Type: Contract - 37Hrs a week.

Managing a small team and managing the designs that are produced by the design houses etc and facilitating those liaisons

• 80% supervision and management of subcontractors / design.
• Looking into the Technical requirements.
• Preference would be defence experience
• Would need considerable electric design experience

Can start on BPSS – Needs SC and to be a British National


Job Overview
Our client is seeking an experienced Senior Electrical Designer to lead a small team and oversee electrical design work, both in-house and from external design houses. The role involves ensuring high-quality, compliant designs and managing the design process for complex engineering projects.

Key Responsibilities
Team Leadership: Manage and mentor a small team of designers.
Design Oversight: Ensure designs meet standards, specifications, and regulatory requirements.
Project Coordination: Work with internal teams and external stakeholders to meet project timelines.
Design Reviews: Conduct reviews to ensure alignment with objectives.
Quality Assurance: Maintain compliance with safety and quality standards.
Collaboration: Coordinate with other engineering disciplines to integrate designs.

10D Civil Engineer – External Works -
Plymouth - Going onsite once a month
Contract - Inside IR35

Key Responsibilities
• Detailed design assurance, make sure that the designs received meets the requirements - Coordinating the designs from multiple design houses.
• Civil infra - highways, drainage, utilities, minor structures
• Manage Babcock engineering processes - deal with internal stakeholders.
• Lots of documentation, procedural (about 50%)

Key Skills
• Good understand of surface water drainage, highways design and alignment.
• Utilities, master planning and coordination.
• Understands and designs modern surface water design, how do you build one.

Start as BPSS with SC pending

We are recruiting for Mechanical Fitters for work within various business unit at Devonport Dockyard in Plymouth.

Using your mechanical experience, you’ll remove, overhaul and install a variety of mechanical equipment which could include hydraulics, weapons, water and fuel systems and LP/HP air, among other assets. Working to engineering drawings and technical specifications, you’ll also install and align new equipment and carry out system and equipment functional tests and surveys.
If you can bring technical skills and a safe working attitude, then we can provide you with some of the most exciting engineering projects this country has to offer.

You will need the ability to read engineering drawings to interpret work instructions and be competent in the use of general workshop machinery specific to mechanical fitting.
Ideally will have worked in the marine industry with experience of Royal Navy ships and submarines, Royal Fleet Auxiliary vessels or large commercial ships - although other relevant experience will be considered.

Essential Experience:

Removal, Installation and overhaul of Marine Mechanical Equipment with a particular focus on Propulsion Equipment, Auxiliary systems & Power Generation Equipment.

Preferable additional experience:

Experience of working within Marine Engineering
Time served within the field of Marine Engineering / Navy Environment

Qualifications required (at least one of the following):

Indentured Apprenticeship
Level 3 Modern Apprenticeship in a mechanical discipline
Armed Forces PO/CPO/NCO with mechanical specialisation
Level 3 Mechanical Engineering qualification

Hours of work - 35 per week - Monday to Thursday 07:30 - 15:30, Friday 07:30 - 12:30, shift and overtime a possibility.

We are recruiting for Mechanical Fitters for work within various business unit at Devonport Dockyard in Plymouth.

Using your mechanical experience, you’ll remove, overhaul and install a variety of mechanical equipment which could include hydraulics, weapons, water and fuel systems and LP/HP air, among other assets. Working to engineering drawings and technical specifications, you’ll also install and align new equipment and carry out system and equipment functional tests and surveys.
If you can bring technical skills and a safe working attitude, then we can provide you with some of the most exciting engineering projects this country has to offer.

You will need the ability to read engineering drawings to interpret work instructions and be competent in the use of general workshop machinery specific to mechanical fitting.
Ideally will have worked in the marine industry with experience of Royal Navy ships and submarines, Royal Fleet Auxiliary vessels or large commercial ships - although other relevant experience will be considered.

Essential Experience:

Removal, Installation and overhaul of Marine Mechanical Equipment with a particular focus on Propulsion Equipment, Auxiliary systems & Power Generation Equipment.

Preferable additional experience:

Experience of working within Marine Engineering
Time served within the field of Marine Engineering / Navy Environment

Qualifications required (at least one of the following):

Indentured Apprenticeship
Level 3 Modern Apprenticeship in a mechanical discipline
Armed Forces PO/CPO/NCO with mechanical specialisation
Level 3 Mechanical Engineering qualification

Hours of work - 35 per week - Monday to Thursday 07:30 - 15:30, Friday 07:30 - 12:30, shift and overtime a possibility.

Role

The purpose of the Mechanical Engineer role is:

To assist the Discipline Lead in delivery of the mechanical services engineering work packages to the required scope, quality, schedule and cost.

Responsible for managing the technical deliverables of the mechanical services engineering packages in line with the planned deliverables agreed by the Discipline Lead.

Qualifications

A degree in an appropriate engineering discipline.

Chartered Engineer, registered with Engineering Council or working towards chartership.

Nuclear Introductory Course or equivalent nuclear and/or marine system knowledge.

Requirements

The ideal candidate will have knowledge of:

• Design of mechanical and nuclear process systems e.g. fresh water, demineralised water
• Design of industrial gas systems e.g. low pressure air, welding gases
• Design of mechanical building services
• Design of pumping stations, including associated pipework and valves
• Design of mechanical ventilation systems
• Knowledge of seismic analysis for mechanical process equipment
• Experience of substantiation of process equipment for justification of Nuclear Safety Functions
• Sound understanding of engineering design and safety practice as relevant to post and project requirements
• Sound understanding of company and departmental procedures relating to Health and Safety, Design and quality

• The post holder must be able to demonstrate relevant knowledge and skills required in the technical management of complex design development throughout the design lifecycle
• Provide expert advice to the sub-contracted design houses to enable them to develop the design
• Sound understanding of engineering design and safety practice as relevant to discipline, post and project requirements
• Sound project specification, planning, project management and budgeting experience
• Sound understanding of Company and departmental procedures relating to Design, Health & Safety and Quality requirements, and ability to manage projects in accordance with these procedures.
• Working knowledge of relevant engineering office computer applications
• Experience of the design support to construction, operation, refit/repair of conventional and nuclear submarines and/or facilities

Work Arrangements

Inside IR35

Initial 29 week contract

Hybrid working – On site once a month (either Devonport or Bristol)

Ability to reach SC Clearance Level – BRITISH NATIONALS ONLY

We are recruiting for Mechanical Fitters for work within various business unit at Devonport Dockyard in Plymouth.

Using your mechanical experience, you’ll remove, overhaul and install a variety of mechanical equipment which could include hydraulics, weapons, water and fuel systems and LP/HP air, among other assets. Working to engineering drawings and technical specifications, you’ll also install and align new equipment and carry out system and equipment functional tests and surveys.
If you can bring technical skills and a safe working attitude, then we can provide you with some of the most exciting engineering projects this country has to offer.

You will need the ability to read engineering drawings to interpret work instructions and be competent in the use of general workshop machinery specific to mechanical fitting.
Ideally will have worked in the marine industry with experience of Royal Navy ships and submarines, Royal Fleet Auxiliary vessels or large commercial ships - although other relevant experience will be considered.

Essential Experience:

Removal, Installation and overhaul of Marine Mechanical Equipment with a particular focus on Propulsion Equipment, Auxiliary systems & Power Generation Equipment.

Preferable additional experience:

Experience of working within Marine Engineering
Time served within the field of Marine Engineering / Navy Environment

Qualifications required (at least one of the following):

Indentured Apprenticeship
Level 3 Modern Apprenticeship in a mechanical discipline
Armed Forces PO/CPO/NCO with mechanical specialisation
Level 3 Mechanical Engineering qualification

Hours of work - 35 per week - Monday to Thursday 07:30 - 15:30, Friday 07:30 - 12:30, shift and overtime a possibility.

Location: Devonport
Hybrid working - 1/2 days per month onsite.
£70 UMB


The purpose of the Principal EC&I Engineer Lead post is:
to manage the delivery of EC&I Engineering design packages to the required scope, schedule, cost and quality.
The post operates as part of the Major Infrastructure Projects Business Unit 1
Supplementary Purpose

The Principal EC&I Engineer post operates as part of the Major Infrastructure Projects Business Unit.

Accountabilities
The Principal EC&I Engineer is accountable to the SDDP Design Manager – for the technical management (quality) of assigned packages.
The Principal EC&I Engineer is accountable to the SDDP Project Manager for output to scope, schedule and cost.

Principal Tasks and Responsibilities
EMPLOYEE principal tasks and responsibilities are:

Lead and manage the EC&I engineering work packages agreeing project related objectives, managing overall designer performance and making appropriate technical management responses.
Provide technical design guidance and review of EC&I system designs incorporating Design Basis Events and Safety Functional requirements as defined in the Safety Case.
Ensure that the design documentation covers the scope of operations required by the Project Manager and is produced to agreed standards, schedule and budget.
Plan for effective project implementation, identifying key factors and leading the project’s technical planning process.
Ensuring effective Quality Management Arrangements, operate and deliver through compliance with our client's Business Management System and Technical Manual.
Ensure that the processes and activities being managed are appropriately documented with appropriate records maintained and configuration and quality controls applied.
Support the SDDP Design Manager implementing the project approach to Health, Safety and Environmental issues as applicable to design.

We are recruiting for Mechanical Fitters for work within various business unit at Devonport Dockyard in Plymouth.

Using your mechanical experience, you’ll remove, overhaul and install a variety of mechanical equipment which could include hydraulics, weapons, water and fuel systems and LP/HP air, among other assets. Working to engineering drawings and technical specifications, you’ll also install and align new equipment and carry out system and equipment functional tests and surveys.
If you can bring technical skills and a safe working attitude, then we can provide you with some of the most exciting engineering projects this country has to offer.

You will need the ability to read engineering drawings to interpret work instructions and be competent in the use of general workshop machinery specific to mechanical fitting.
Ideally will have worked in the marine industry with experience of Royal Navy ships and submarines, Royal Fleet Auxiliary vessels or large commercial ships - although other relevant experience will be considered.

Essential Experience:

Removal, Installation and overhaul of Marine Mechanical Equipment with a particular focus on Propulsion Equipment, Auxiliary systems & Power Generation Equipment.

Preferable additional experience:

Experience of working within Marine Engineering
Time served within the field of Marine Engineering / Navy Environment

Qualifications required (at least one of the following):

Indentured Apprenticeship
Level 3 Modern Apprenticeship in a mechanical discipline
Armed Forces PO/CPO/NCO with mechanical specialisation
Level 3 Mechanical Engineering qualification

Hours of work - 35 per week - Monday to Thursday 07:30 - 15:30, Friday 07:30 - 12:30, shift and overtime a possibility.

Job Title: Senior Electrical Engineer (LV Power)

Location: South West England, Devon, Plymouth

Job Type: Contract, expected to work full-time hours

Primary Industry: Construction

Secondary Industry: Engineering

• Design, develop, and oversee electrical systems focusing on LV power within construction projects
• Ensure compliance with industry standards and regulations
• Collaborate with project teams to deliver high-quality electrical solutions
• Provide technical expertise and guidance on LV power systems
• Perform electrical calculations, simulations, and analysis
• Conduct site visits to assess electrical installations
• Troubleshoot and resolve electrical issues

• Bachelor's degree in Electrical Engineering or related field
• Professional Engineering (PE) licence preferred
• Proven experience in LV power system design and implementation
• Strong understanding of electrical codes and standards

Bachelor's degree in Electrical Engineering or related field

Minimum of 5 years of experience in LV power system design and implementation

• Proficiency in electrical design software
• Excellent problem-solving and analytical skills
• Strong communication and teamwork abilities
• Ability to manage multiple projects simultaneously

• Master's degree in Electrical Engineering
• Previous experience in the construction industry
• Knowledge of BIM (Building Information Modelling)

• Office-based work with occasional site visits
• Potential exposure to construction site hazards
• Regular collaboration with project teams and clients