Total 47 Others level Engineering job vacancies in 016683 Kzoo Main

NTI-NTU Corporate Laboratory is a collaboration between Nanofilm Technologies International Limited (“Nanofilm”, “NTI”), Nanyang Technological University (“NTU”) and supported by Singapore under RIE2025. The Laboratory’s objective is to propel Innovation and Technologies commercialisation through NTU’s innovation and NTI’s deep technology. NTI-NTU Corporate Laboratory aligns with Singapore’s RIE2025 handbook – which emphasises the nation’s commitment to research and innovation, aiming to drive economic growth and address national challenges.

The Nanyang Technological University NTI-NTU Corporate Laboratory is seeking to hire a Research Fellow. The selected candidate will innovate hybridized composite materials and thin film coatings.

Key Responsibilities:

• Design, planning, and setting up of large-scale chemical vapor deposition (CVD) system.

• Design appropriate experiments for CVD growth of 3D boron nitride (BN) foams.

• Optimize CVD growth parameters to obtain tunable high-quality 3D BN foams.

• Perform and analyze SEM, TEM and Raman and other material characterization.

• Perform thermal characterization and real-application tests.

• Prepare monthly reports and presentations for meetings and project deliverables.

Job Requirements:

• Possess PhD degree in Electrical and Electronic Engineering, Material Science, Physics or related disciplines.

• Experience in operating CVD systems.

• Experience in nanomaterial characterization techniques.

• Good management skills.

• Good interpersonal skills.

• Excellent teamwork awareness.

• Good communication and writing in English.

• Strong responsibility for research/work.

We regret that only shortlisted candidates will be notified.

NTI-NTU Corporate Laboratory is a collaboration between Nanofilm Technologies International Limited (“Nanofilm”, “NTI”), Nanyang Technological University (“NTU”) and supported by Singapore under RIE2025. The Laboratory’s objective is to propel Innovation and Technologies commercialisation through NTU’s innovation and NTI’s deep technology. NTI-NTU Corporate Laboratory aligns with Singapore’s RIE2025 handbook – which emphasises the nation’s commitment to research and innovation, aiming to drive economic growth and address national challenges.

The Nanyang Technological University NTI-NTU Corporate Laboratory is seeking to hire a Research Fellow. The selected candidate will innovate hybridized composite materials and thin film coatings.

Key Responsibilities:

• Simulate, design, fabricate and characterize plasma process equipment.

• Familiar with COMSOL software to simulate the influence of magnetic field on plasma flow.

• Conducts various design simulations to refine processes.

• Optimize vacuum coating processes, and leading R&D efforts in material science for application development.

• Drives the development and implementation of coating techniques.

• Oversee the transition from experimental designs to scalable solutions.

• Additionally, the role requires preparation and delivery of comprehensive reports to satisfy the stipulations of funding entities and corporate mandates.

Job Requirements:

• Ph.D. in a relevant engineering or science discipline is required.

• At least 5 years of combined specialized post-doctoral experience in industry or a recognized research institute.

• Expertise in plasma physics, plasma source design, plasma control system design and a strong track record of research publications and patent filings are essential.

• Applicants must demonstrate effective collaboration skills in multidisciplinary settings.

We regret that only shortlisted candidates will be notified.

The School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research. With more than 130 faculty members and an enrolment of more than 4,000, of which close to 1,000 are graduate students, it is one of the largest EEE schools in the world and ranks 4th in the field of Electrical & Electronic Engineering in the 2021 QS World University Rankings by Subjects.

EEE is inviting applications for the position of Senior Research Engineer I. The Senior Research Engineer I (USRP and Experimental Platform Development) will be mainly responsible for the programming on Labview platform to support the USRP based wireless communication systems.

Key Responsibilities:

• Responsible for USRP based wireless communication system building and corresponding platform programming.

• Have solid background on wireless communication, especially for antenna design and microwave transmission.

• Develop Labview based codes, and implement corresponding algorithms in wireless communication systems.

• Prototyping the SS-CPM/PD-NOMA and FH-SCMA/CD-NOMA algorithms into USRP-2974 with NI Labview and test its efficacy in the lab environment.

• To demonstrate the above algorithms in the laboratory with a minimum of 3 nodes, and evaluate the performance of the algorithms.

• Work with team members to ensure smooth integration of various subsystems.

• Document all processes and implementation.

• Manage tasks according to the project schedule.

• Work closely with PI, team members and collaborators to ensure timely and efficient completion of project milestones.

• Keep track of technology trends.

Job Requirements:

• Bachelor’s degree and above in Electronic Engineering or related field from a reputable university.

• Diploma with good industry experience may also be considered.

• Experience in embedded software development.

• Proficient and good skill in c programing, able to design corresponding code according to project requirement

• Candidate with knowledge of SCMA, CPM and NOMA would be preferred.

• Good understanding and ability in wireless communication systems, especially for antenna design and microwave transmission.

• Able to multi-task and work in a dynamic environment.

• Fluent verbal and written communications in English.

• Experiences in USRP development, wireless communication system building.

• Experiences in programming software (e.g., MATLAB, C, and C++).

We regret that only shortlisted candidates will be notified.

The School of Civil and Environmental Engineering (CEE) is a leading school for Sustainable Built Environment. The School plays an integral role in spearheading tertiary education, advancing research innovations and providing professional services in a number of key disciplines in Civil and Environmental Engineering and Maritime Studies fields, with the objective of contributing to the technological and economic advancement of Singapore and beyond. The School’s mission in research is to achieve excellence by providing a conducive and intellectually stimulating environment to enable high quality work in strategic directions that are of significant impact to industry, science and technology.

The School of Civil and Environmental Engineering (CEE) is inviting applications for the position of Research Fellow.

Key Responsibilities:

• Conduct research on the production of self-healing cement additive and its applications.

Job Requirements:

• PhD in Engineering, Material Science or Chemistry.

• Strong academic standing with several publications in reputable journals.

• Good English speaking and writing skills.

• Strong references from previous supervisors.

• Previous experience in chemical synthesis and analysis, concrete sample preparation, mechanical testing and microstructural characterization (XRD, TGA, FTIR and SEM-EDX).

• Additional experience in UHPC and carbon-based material in concrete would be preferable, but not required.

We regret that only shortlisted candidates will be notified.

The School of Civil and Environmental Engineering (CEE) is a leading school for Sustainable Built Environment. The School plays an integral role in spearheading tertiary education, advancing research innovations and providing professional services in a number of key disciplines in Civil and Environmental Engineering and Maritime Studies fields, with the objective of contributing to the technological and economic advancement of Singapore and beyond. The School’s mission in research is to achieve excellence by providing a conducive and intellectually stimulating environment to enable high quality work in strategic directions that are of significant impact to industry, science and technology.

The School of Civil and Environmental Engineering (CEE) is inviting applications for the position of Research Associate.

Key Responsibilities:

• Conduct research on thermoelectric properties of inorganic-based alkali-activated materials (AAMs) and its potential for thermal energy harvesting.

Job Requirements:

• Master in Engineering, Material Science or Chemistry.

• Strong academic standing with several publications in reputable journals.

• Good English speaking and writing skills.

• Strong references from previous supervisors.

• Previous experience in chemical synthesis and analysis, concrete sample preparation, mechanical testing and microstructural characterization (XRD, TGA, FTIR and SEM-EDX).

• Additional experience in pavement engineering and SHCC would be preferable, but not required.

We regret that only shortlisted candidates will be notified.

Position Summary:

While position responsibilities vary, every member of our community is expected to foster a culture of belonging and a psychologically healthy work environment by communicating across differences, being cooperative, collaborative, open, and welcoming, showing respect, compassion, and empathy, engaging and supporting others regardless of background or perspective, speaking up when others are being excluded or treated inappropriately, and supporting work/life integration of oneself and others.

The Facilities Designer for Structural Engineering will join the Architecture and Civil Engineering Section, which includes a team of architects, civil engineers, structural engineers, the Roof Program Manager, the Building Code Program Manager, and the Quality Assurance Program Manager. The Facilities Designer will work as a team member with Architecture and Civil Engineering, Mechanical Engineering, Electrical Engineering, and Environmental and Energy Engineering to deliver effective and efficient full-range professional engineering services in support of university-wide construction and renovation projects. The Facilities Designer will perform designs with general direction from the Design Lead or assist engineers with larger design projects. This position will provide design support and serve as technical resource for a range of civil and structural systems, including building structures, site utilities/infrastructure, bridges, parking structures, and system assessments. The Facilities Designer will prepare CAD/BIM Drawings in coordination with other disciplines according to CAD/BIM standards and assists with composing studies and reports.  

The Facilities Designer may assist with preparation of the Opinion of Probable Costs and technical specifications, as well as fee estimates for design proposals. The Facilities Designer will organize their own design and drafting efforts to deliver work product within project budgets and schedules and supports design managers during construction. The position requires construction site visits where odors, dust, noise, and/or physical hazards may be present. Other requirements may include climbing ladders, riding in aerial work platforms, working in confined space, and utilizing safety harnesses and other PPE as applicable per OSHA and university requirements.

Ours is a values–based organization where all employees are accountable for supporting the organization’s values of truth, respect, excellence, teamwork, and integrity. FCS employees are required to attend staff development trainings and participate in the performance evaluation process.

We Require These Qualifications:

• Experience in and/or demonstrated commitment to supporting diversity, equity, access, inclusion, and wellbeing.  

• Ability to cultivate and develop inclusive and equitable working relationships with students, faculty, staff, and community members.   

• An associate degree in construction technology, architecture, engineering, or related field, plus two years’ minimum relevant experience or equivalent combination of education and experience. If the candidate holds a bachelor’s degree in a related field, then the experience requirement can be waived.

• Proficiency in Autodesk Revit and/or AutoCAD.   

• Ability to interpret construction drawings and specifications.   

• Ability to work independently while taking field measurements and translating them to drawings.  

• General knowledge of construction materials and methods.    

• Good oral and written communication skills.  

• Ability to develop and maintain effective customer relationships within a team environment.   

• Ability to work on multiple projects and designs with varying scope and schedule.   

• Must have and maintain a valid driver’s license.

You Will Be a Top Candidate with Our Preferred Qualifications:

• A bachelor’s degree in civil or structural engineering from an ABET-accredited program.

• Two or more years of experience in multi-discipline design and construction.   

• Two years of performing condition assessments.   

• Technical knowledge of design and construction industries.   

• Proficiency with a variety of business and engineering design computer software (such as Word, Excel, Structural Engineering Design Software like RISA, etc.)   

• Candidate either will have already passed Fundamentals of Engineering Exam or be ready to take exam within one year of employment start date.

Rewards and Benefits:

Cornell University provides excellent benefits that include professional development, access to many wellness programs, employee discounts with local and national retail brands, health care options, and great retirement options. Cornell provides generous paid leave provisions as well, including 3 weeks of vacation, health leave, personal leave, and 13 paid holidays (including end-of-year winter break).    

Cornell has also been nationally recognized as an award-winning workplace for our health, wellbeing, sustainability, and diversity initiatives. For more information, click here.   

This is a full-time, non-academic staff, benefits-eligible opportunity located in Ithaca, New York.    

Application Procedure:

When applying through our system, please remember to attach your application materials (Resume and Cover Letter) in either Microsoft Word or PDF format. In the Experience Section of your application, use the "Drop Files Here" box to manually drag document(s) into your application. For a more detailed description and instructions on how to apply online, please click here as an external candidate. NOTE: Cornell employees must apply through the Internal Cornell Career site.   

• Relocation assistance is not available for this position.   

• Visa sponsorship is not available for this position.   

Familiarize yourself with Cornell's COVID-19 workplace guidance as well as the university's COVID-19 services and information.

University Job Title:

Job Family:

Level:

Pay Rate Type:

Pay Range:

Remote Option Availability:

Company:

Contact Name:

Job Titles and Pay Ranges:

Non-Union Positions

Noted pay ranges reflect the potential pay opportunity for each job profile. The hiring rate of pay for the successful candidate will be determined considering the following criteria:

• Prior relevant work or industry experience

• Education level to the extent education is relevant to the position

• Unique applicable skills

• Academic Discipline (faculty pay ranges reflects 9-month annual salary)

To learn more about Cornell’s non-union staff job titles and pay ranges, see Career Navigator.

Union Positions

The hiring rate of pay for the successful candidate will be determined in accordance with the rates in the respective collective bargaining agreement. To learn more about Cornell’s union wages, see Union Pay Rates.

Current Employees:

If you currently work at Cornell University, please exit this website and log in to Workday using your Net ID and password. Select the Career icon on your Home dashboard to view jobs at Cornell.

Online Submission Guidelines:

Most positions at Cornell will require you to apply online and submit both a resume/CV and cover letter.  You can upload documents either by “dragging and dropping” them into the dropbox or by using the “upload” icon on the application page. For more detailed instructions on how to apply to a job at Cornell, visit How We Hire on the HR website.

Employment Assistance:

For general questions about the position or the application process, please contact the Recruiter listed in the job posting or email mycareer@cornell.edu.

If you require an accommodation for a disability in order to complete an employment application or to participate in the recruiting process, you are encouraged to contact Cornell University's Office of Institutional Equity and Title IX at voice (607) 255-2242, or email at equity@cornell.edu.

Applicants that do not have internet access are encouraged to visit your local library, or local Department of Labor. You may also request an appointment to use a dedicated workstation in the Office of Talent Attraction and Recruitment, at the Ithaca campus, by emailing mycareer@cornell.edu.

Notice to Applicants:

Please read the required Notice to Applicants statement by clicking here. This notice contains important information about applying for a position at Cornell as well as some of your rights and responsibilities as an applicant.

EEO Statement:

Diversity and Inclusion are a part of Cornell University’s heritage. We are a recognized employer and educator valuing AA/EEO, and we do not tolerate discrimination based on any protected characteristic, including race, ethnic or national origin, citizenship and immigration status, color, sex/gender, pregnancy or pregnancy-related conditions, age, creed, religion, actual or perceived disability (including persons associated with such a person), arrest and/or conviction record, military or veteran status, sexual orientation, gender expression and/or identity, an individual’s genetic information, domestic violence victim status, familial status, marital status, or any other characteristic protected by applicable federal, state, or local law. We also recognize a lawful preference in employment practices for Native Americans living on or near Indian reservations in accordance with applicable law. 

Cornell University embraces diversity and seeks candidates who will contribute to a climate that supports students, faculty, and staff to all identities and backgrounds. We encourage individuals from underrepresented and/or marginalized identities to apply.

Who are we?

Cornell University is looking for a Major Gift Officer to join the College of Engineering -- the largest engineering program among the Ivies. Our Engineers are solving some of the world’s most important challenges, big and small – from space exploration to climate change to nanomedicine.

Reporting to the Director of Development, the Major Gift Officer is a cornerstone for Cornell Engineering, and has direct access to the faculty, staff, and students whose stories are vital to our work. The Major Gift Officer manages an estimated pool of 80-100 households, with an emphasis on gift capacity of $250k to $3M or more.  They will assist the Director in implementing pipeline growth initiatives, as well as play an integral role in the liaison structure with departments and schools within the College of Engineering. The Major Gift Officer will also serve as a vital partner to university gift officers, leveraging relationships, and sharing expertise on priorities identified by the college’s dean, Lynden Archer.  An ideal candidate is someone who finds fulfillment in working through complex situations requiring consideration of multiple perspectives in the pursuit of building strong, meaningful relationships with faculty and staff.

Key Responsibilities

• Identify prospective donors, initiate personal contact, and create opportunities for philanthropic engagement with the College of Engineering and Cornell University.

• Create/implement fundraising strategies, connecting prospects and donors to college and department/school priorities by building strong, long-term relationships with alumni, parents, and friends of Cornell.

• Manage an estimated pool size of 80-100 prospect households, comprised of a mixture of unqualified, new and long-term donors, with the goal of securing major gifts.

• Regularly solicit and close gifts of $250,000 or greater, with an emphasis on prospects with seven figure capacity, while simultaneously raising donor sights, encourage annual giving, multi-year commitments, and estate gifts.

• Be conversant on core priorities and product knowledge for the university and the College of Engineering, as well as effectively access more detailed information as needed.

• Collaborate with faculty, staff, administrators, and colleagues in the Division of Alumni Affairs and Development.

• Assist the Director in implementing stewardship initiatives, the liaison structure with departments and schools within the College of Engineering, and other activities as needed.

• Effectively and regularly communicate and visit with prospects through various means but with an emphasis on in-person.

• Actively collaborate with key stakeholders to develop customized cultivation and stewardship activities, including nominations for volunteer leadership roles.

• Serve as a resource to other gift officers in helping to develop strategies for prospect development.

• Maintain accurate database information reflecting prospect strategies and activities and for compiling complete gift and commitment documentation.

REQUIRED QUALIFICATIONS:

• Bachelor’s degree and 7 - 10 years of relevant experience or equivalent combination, in development, alumni affairs, public affairs, marketing, and/or business development.

• Experience working with volunteers.

• Extensive experience working with faculty and faculty leadership.

• The ability to manage complex relationships.

• Proven collaborator with teamwork skills.

• Excellent communication skills; the ability to speak credibly about higher education and the aspirations of Cornell; clarity, crispness and effectiveness in written and oral presentations.

• Willingness to travel extensively, up to 40% of staff time, and to work nights and weekends as needed.

Rewards and Benefits

Cornell receives national recognition, as an award-winning workplace for our health, wellbeing, sustainability, and diversity initiatives. Benefits include:

• Comprehensive health care options

• Access to wellness programs

• Employee discounts with local and national retail brands

• Generous retirement contributions

• Leave provisions including three weeks of vacation and 12 holidays

• Impressive educational benefits including tuition-free Extramural Study and Employee Degree Program, Tuition Aid for external education, and Cornell Children's Tuition Assistance program

• Learn more about benefit opportunities

This position is based in Ithaca, NY with hybrid work arrangements, which require 2 or 3 days in-office and the remainder can be remote.

 No visa sponsorship is available for this position.

Familiarize yourself with Cornell's COVID-19 workplace guidance as well as the university's COVID-19 services and information.

University Job Title:

Job Family:

Level:

Pay Rate Type:

Pay Range:

Remote Option Availability:

Company:

Contact Name:

Job Titles and Pay Ranges:

Non-Union Positions

Noted pay ranges reflect the potential pay opportunity for each job profile. The hiring rate of pay for the successful candidate will be determined considering the following criteria:

• Prior relevant work or industry experience

• Education level to the extent education is relevant to the position

• Unique applicable skills

• Academic Discipline (faculty pay ranges reflects 9-month annual salary)

To learn more about Cornell’s non-union staff job titles and pay ranges, see Career Navigator.

Union Positions

The hiring rate of pay for the successful candidate will be determined in accordance with the rates in the respective collective bargaining agreement. To learn more about Cornell’s union wages, see Union Pay Rates.

Current Employees:

If you currently work at Cornell University, please exit this website and log in to Workday using your Net ID and password. Select the Career icon on your Home dashboard to view jobs at Cornell.

Online Submission Guidelines:

Most positions at Cornell will require you to apply online and submit both a resume/CV and cover letter.  You can upload documents either by “dragging and dropping” them into the dropbox or by using the “upload” icon on the application page. For more detailed instructions on how to apply to a job at Cornell, visit How We Hire on the HR website.

Employment Assistance:

For general questions about the position or the application process, please contact the Recruiter listed in the job posting or email mycareer@cornell.edu.

If you require an accommodation for a disability in order to complete an employment application or to participate in the recruiting process, you are encouraged to contact Cornell University's Office of Institutional Equity and Title IX at voice (607) 255-2242, or email at equity@cornell.edu.

Applicants that do not have internet access are encouraged to visit your local library, or local Department of Labor. You may also request an appointment to use a dedicated workstation in the Office of Talent Attraction and Recruitment, at the Ithaca campus, by emailing mycareer@cornell.edu.

Notice to Applicants:

Please read the required Notice to Applicants statement by clicking here. This notice contains important information about applying for a position at Cornell as well as some of your rights and responsibilities as an applicant.

EEO Statement:

Diversity and Inclusion are a part of Cornell University’s heritage. We are a recognized employer and educator valuing AA/EEO, and we do not tolerate discrimination based on any protected characteristic, including race, ethnic or national origin, citizenship and immigration status, color, sex/gender, pregnancy or pregnancy-related conditions, age, creed, religion, actual or perceived disability (including persons associated with such a person), arrest and/or conviction record, military or veteran status, sexual orientation, gender expression and/or identity, an individual’s genetic information, domestic violence victim status, familial status, marital status, or any other characteristic protected by applicable federal, state, or local law. We also recognize a lawful preference in employment practices for Native Americans living on or near Indian reservations in accordance with applicable law. 

Cornell University embraces diversity and seeks candidates who will contribute to a climate that supports students, faculty, and staff to all identities and backgrounds. We encourage individuals from underrepresented and/or marginalized identities to apply.

Building a career at Granite may be the most valuable thing you could do...

Are you interested in the opportunity to work for an industry-leading company that will give you the experience and exposure you need to build your career and personal brand? If so, then you’ve come to the right place!

Essential Job Accountabilities

• Assist with job controls to ensure compliance with contract, budget, schedule, forecasting and job costing. Review and prepare daily cost reporting to the project team and upper management.

• Interpret design/drawings for craft workers installing material to ensure specifications are followed.

• Interface with all on-site departments as required, to resolve problems, ensure quality construction, in order to support overall project schedule. Create 3-week look ahead schedules on a weekly basis with input from the project team.

• Research and recommend resolutions to drawing interpretation problems, conflicts, interference, and errors, to verify that all completed work complies with applicable codes, drawing and specifications.

• Prepare and disseminate all required documentation records such as status reports, punch lists describing work items to be done, sketches of work already completed, material requirement calculations, to supervisor to provide accuracy.

• Provide technical support and direction regarding project material controls including delivery dates, construction schedules and design requirements to ensure additional costs are minimized.

• Prepare drawings and sketches to support construction work, change orders, and estimates to meet changing job requirements.

• Provide necessary building control lines and elevations for accurate measurement and correct installation of materials to ensure a quality job.

• Develop job essential data including quantity take-offs, material price lists, labor costs per man hour, and equipment to ensure accurate estimates and bids.

• Research historical data and productivity analysis reports in order to compile summary reports to develop guidelines and precedence for future estimates.

• May supervise, direct, and mentor project staff to ensure individual development and that project standards are met. 

• Assist in representing company, project and/or department during client and project management meetings to ensure effective communication. Prepare daily report and participate in daily plan of the day (POD) meetings.

Education

• Bachelor’s Degree in Civil Engineering, Construction Management, Business Administration, or related field preferred, or equivalent combinations of technical training and related experience.

Work Experience

• 2+ year’s construction estimating support, engineering, field support, or similar experience.

Knowledge, skills, and abilities

• Proficiency with all MS Office products (Word, Excel, PowerPoint, etc.), Scheduling and HCSS (Heavyjob).

• Working knowledge of construction equipment and techniques, drawing and specifications, building materials and required standards applicable to discipline.

• Ability to perform trigonometric calculation either manually or with a calculator.

• Ability to assume responsibility, interface and communicate effectively with others.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit and use hands to operate a computer keyboard. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Subject to outside working conditions. At times will be working around large construction equipment, must be safety conscience.

Additional Requirements/Skills

• Comply, understand, and support corporate safety initiatives to ensure a safe work environment.

• Team player

• Ability and willingness to abide by Granite’s Code of Conduct on a daily basis

• Valid driver’s license and ability to drive

• Previous experience on solar projects is preferred but not required.

Our Benefits at a Glance:

Building tomorrow starts with you, and Granite knows that you can excel only if we support you in and out of the workplace.  That is why we offer a broad benefits package that includes paid holidays, sick leave, medical, dental, vision, life insurance, disability insurance, flexible spending plans, as well as special programs for musculoskeletal health, mental wellness, and more.

Salaried employees may choose from two PPO medical plans through Anthem BlueCross, including our most popular plan, for which 100% of the premium is paid by Granite for eligible employees and dependents.  Employees can also opt into a Health Savings Account (HSA) or a Flexible Spending Account (FSA).

As part of our investment in your future outside of the workplace, Granite provides a 100% match on the first 6% of eligible compensation that salaried employees defer into their 401(k) plans, which vests immediately.

Benefits may vary for positions located outside of the continental United States.

Base Salary Range: 

Pay may vary based upon relevant experience, skills, location, and education among other factors.  ​

About Granite Construction Incorporated

More than a career - a chance to make a difference in people's lives.

Build an exciting, rewarding career with us – help us make a difference for millions of people every day. Consider joining the Duke Energy team, where you'll find a friendly work environment, opportunities for growth and development, recognition for your work, and competitive pay and benefits.

This posting is for one position, multiple location options.  Location will be determined at time of offer and based on availability.

Job Description

The Senior Engineer manages work in engineering areas of specialization, with minimal supervision. The Senior Engineer is expected to develop advanced skills and to have the ability to work independently, with guidance limited to unusual or complex projects or issues. Employees in the Senior Engineer position are fully competent in the use of concepts and procedures. The Senior Engineer identifies problems, develops solutions, and takes action to resolve.

The Lead Engineer is at the specialist level of the Engineering classification hierarchy. Employees at this level solve complex problems, manage work, and provide leadership to others in engineering areas of specialization, with minimal supervision and increased latitude for un-reviewed work. The Lead Engineer serves in lead roles providing guidance to others. They are also expected to have advanced skills and have the ability to work independently.

Responsibilities

• Provides engineering/technical expertise and guidance in the identification, analysis and resolution of problems of increasing scope and complexity in both inside as well as outside the scope of typical responsibility.
• Ensures accomplishment of business goals and objectives through effective planning, organizing, estimating, scheduling and monitoring of work activities; decisions may affect the operations or results of the work group and may have some impact on major projects or department results.
• Prepares thorough and accurate technical reports, correspondence, documentation, calculations and sketches related to defined problems and analysis of increasing scope and complexity.
• Conducts engineering and related studies; completes non-routine engineering projects with minimal oversight with the ability to independently manage project schedules and interfaces; competent to design, operate and maintain systems with moderate impact on existing systems.
• Possesses and applies the fundamental concepts, practices and procedures; proficient in technical and analytical competencies necessary to handle assignments of increasing complexity.
• Develops positive working relationships to effectively coordinate work activities.  Demonstrates effective oral and written communication skills.  Maintains accurate records and files.
• Supports the company's goals and represents the company positively and professionally.
• Install Power Quality Monitors safely at the Utility level and occasionally at the customer if needed.
• Provide Technical Support to internal Distribution and transmission organization on potential solutions for Power Quality issues.
• Provide engineering recommendation to industrial, commercial, and residential customers.
• Formulate solutions to both Duke Energy and its customers based on data evaluations and information gathered. 
• Ability to collaborate and communicate with local field personnel.

Basic/Required Qualifications

Note: This posting is for one position. Dependent on relevant experience, the level to which a candidate is aligned is outlined below.

Senior Engineer

• Graduation from a four-year college or university with a Bachelor of Science in Engineering from an ABET accredited program or state registration as a Professional Engineer. A Master's degree in engineering will be considered in lieu of the B. S. engineering degree.
• Minimum of 6 years of engineering experience

Lead Engineer

• Graduation from a four-year college or university with a Bachelor of Science in Engineering from an ABET accredited program or state registration as a Professional Engineer. A Master's degree in engineering will be considered in lieu of the B. S. engineering degree.
• Minimum of 8 years of engineering experience
• Registration as a Professional Engineer may be required by some departments. (e.g. Transmission, Distribution, Gas Engg, RRE).

Additional Preferred Qualifications

• Proficient in engineering theories and principle
• Proficient in practices of researching engineering and design issues, evaluating alternatives, making sound recommendations, and preparing and presenting recommendations.
• Demonstrated effective verbal and written communication skills.
• Proficient in principles of project management
• Registered Professional Engineer (PE)
• Experience in the utility industry
• Certified to hook up instruments to live power equipment.
• Experience with troubleshooting VFD’s (Variable Frequency drives), Motor soft starts, PLC’s and various industrial equipment

Working Conditions

• Hybrid Mobility Classification – Work will be performed from both remote and onsite locations after the onboarding period. However, hybrid employees should live within a reasonable daily commute to a Duke Energy facility.

Travel Requirements

Relocation Assistance Provided (as applicable)

Represented/Union Position

Visa Sponsored Position

Posting Expiration Date

All job postings expire at 12:01 AM on the posting expiration date.

Please note that in order to be considered for this position, you must possess all of the basic/required qualifications.

Privacy

Do Not Sell My Personal Information (CA)

Terms of Use

Accessibility

Position Summary: 

The Network Engineer is responsible for the operation, security, and day to day maintenance of the systems network, servers, switches and data and voice communications. This position works closely with the Desktop Support Specialist and telecom to give those positions assistance in fulfilling their respective responsibilities to keep all computer operations functioning. The network administrator role includes installing, configuring and upgrading network infrastructure and associated devices. Diagnosing and troubleshooting both common and unusual network problems.  Performing preventive maintenance on the network, along with monitoring performance on both the local area network (LAN) and wide area network. The network is monitored 24/7.  Develop and maintain server and network system diagrams. This position is also responsible for the installation, operations, upgrade, performance, and monitoring of the network and application servers – as well as security camera and building security systems.

Minimum Qualifications:

• Associate degree or 5 years of related experience
• Two years network experience
• Two years wireless experience
• Two years of Citrix experience
• Five years server, desktop and peripheral experience
• Preferred: Bachelor's Degree
• Preferred: Cisco certifications
• Preferred: Prior hospital or medical practice experience

Essential Job Functions:

• Install, maintain, upgrade, and troubleshoot routers, gateways, firewalls, and other networking infrastructure for local area and wide area networks (LAN/WAN), including Internet connectivity.
• Support backup and disaster recovery solutions associated both BH and the affiliated clinics core system infrastructure.
• Install, administer, support, and maintain server hardware, peripherals, software, and operating systems.
• Manage and support the information systems security solutions that make up both BDH and the affiliated clinics core infrastructure.
• Assist other IS staff with resolution of technical and process issues.
• After-hours on-call duties

Knowledge, Skills and Abilities

• Ability to work in a busy and stressful environment
• Creativity, problem analysis and decision making
• Ability to work varied shifts
• Computer applications, MS Office, EMR, internet applications and standard office equipment
• Ability to analyze, organize and prioritize work while meeting multiple deadlines
• Self-directed, completes assignments accurately, thoroughly and with minimal oversight
• Strong emotional intelligence, interpersonal and teamwork skills

Position Summary: 

The Industrial and Systems Engineering Intern will have the opportunity to work alongside our project support and change management team and contribute to real-world projects that have a meaningful impact. This internship is designed to provide you with valuable industry experience, mentorship, and the chance to apply your academic knowledge in a practical setting. This position provides insight and experience with the daily operations of the hospital, medical office buildings, healthcare systems, and technology.

Minimum Qualifications:

• High School Diploma or Equivalent
• Currently pursuing a bachelor's or master's degree in a relevant systems or industrial engineering field.
• Strong academic record with coursework related to the internship position.

Essential Job Functions:

• Collaborate with leaders, project managers, and planners on various process improvements, continual quality improvement, and other projects.
• Assist in project planning, research, and data collection.
• Contribute to the development and execution of project and process design and analysis.
• Prepare technical reports, documentation, and presentations for internal and external stakeholders.
• Maintain accurate project records and documentation.
• Perform daily rounds with teams when partnering on projects and process redesigns.
• Use academic learnings to identify additional improvement considerations for projects and process redesigns.
• Review business cases and other operational analyses to identify evidence-based recommendations on project and process design.
• Work closely with cross-functional teams to achieve project objectives.
• Participate in team meetings and brainstorming sessions.

Knowledge, Skills, and Abilities

• Demonstrates sound judgment, patience, and maintains a professional demeanor at all times
• Exercises tact, discretion, sensitivity, and maintains confidentiality
• Performs essential job functions successfully in a busy and stressful environment
• Learns current and new computer applications and office equipment utilized at Bozeman Health
• Strong interpersonal, verbal, and written communication skills
• Analyzes, organizes, and prioritizes work while meeting multiple deadlines
• Works varied shifts as scheduled and/or needed

Building a career at Granite may be the most valuable thing you could do...

Are you interested in the opportunity to work for an industry-leading company that will give you the experience and exposure you need to build your career and personal brand? If so, then you’ve come to the right place!

Essential Job Accountabilities

• Assist with job controls to ensure compliance with contract, budget, schedule, forecasting and job costing. Review and prepare daily cost reporting to the project team and upper management.

• Interpret design/drawings for craft workers installing material to ensure specifications are followed. Ensure field craft personnel are working off the latest plan sets and have the current installation manual and/or specifications.

• Research and recommend resolutions to drawing interpretation problems, conflicts, interference, and errors, to verify that all completed work complies with applicable codes, drawing and specifications.

• Prepare and disseminate all required documentation records such as status reports, punch lists describing work items to be done, sketches of work already completed, material requirement calculations, to supervisor to provide accuracy.

• Provide technical support and direction regarding project material controls including delivery dates, construction schedules and design requirements to ensure additional costs are minimized.

• Prepare drawings and sketches to support construction work, change orders, and estimates to meet changing job requirements.

• Provide necessary building control lines and elevations for accurate measurement and correct installation of materials to ensure a quality job.

• Develop job essential data including quantity take-offs, material price lists, labor costs per man hour, and equipment to ensure accurate estimates and bids.

• Research historical data and productivity analysis reports in order to compile summary reports to develop guidelines and precedence for future estimates.

• Maintain files of working documents for back-up to estimating figures to support accuracy of bid submission.

• Attend and participate in morning safety meetings.

• Create and maintain 3 week project look ahead.

• Submit and maintain RFI & Submittal logs.

Education

• Bachelor’s Degree in Civil Engineering, Construction Management, Business Administration, or related field preferred, or equivalent combinations of technical training and related experience.

Work Experience

• 0 - 2 years construction estimating support, engineering, field support, or similar experience.

Knowledge, skills, and abilities

• Proficiency with all MS Office products (Word, Excel, PowerPoint, etc.), Scheduling and HCSS (Heavyjob).

• Working knowledge of construction equipment and techniques, drawing and specifications, building materials and required standards applicable to discipline.

• Ability to perform trigonometric calculation either manually or with a calculator.

• Ability to assume responsibility, interface and communicate effectively with others.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit and use hands to operate a computer keyboard. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Subject to outside working conditions. At times will be working around large construction equipment, must be safety conscience.

Additional Requirements/Skills

• Comply, understand, and support corporate safety initiatives to ensure a safe work environment.

• Team player

• Ability and willingness to abide by Granite’s Code of Conduct on a daily basis

• Valid driver’s license and ability to drive

Our Benefits at a Glance:

Building tomorrow starts with you, and Granite knows that you can excel only if we support you in and out of the workplace.  That is why we offer a broad benefits package that includes paid holidays, sick leave, medical, dental, vision, life insurance, disability insurance, flexible spending plans, as well as special programs for musculoskeletal health, mental wellness, and more.

Salaried employees may choose from two PPO medical plans through Anthem BlueCross, including our most popular plan, for which 100% of the premium is paid by Granite for eligible employees and dependents.  Employees can also opt into a Health Savings Account (HSA) or a Flexible Spending Account (FSA).

As part of our investment in your future outside of the workplace, Granite provides a 100% match on the first 6% of eligible compensation that salaried employees defer into their 401(k) plans, which vests immediately.

Benefits may vary for positions located outside of the continental United States.

Base Salary Range: 

Pay may vary based upon relevant experience, skills, location, and education among other factors.  ​

About Granite Construction Incorporated

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. Join our team to help people #SeeBrilliantly!

Responsibilities:

• As corporate SME interprets regulatory standards or guidance relating to reprocessing and translates into local and corporate procedures.

• Establishes global implementation strategy and timelines for new or updated standards.

• Provides detailed analysis of standards and impact on existing technical files.  Partners with sustaining engineers to properly maintain reusable product technical files.

• Proactively monitors literature, standards, industry guidance, trends, and customer reprocessing expectations globally.

• Rapidly assimilates new technology and requirements, evaluates long term organizational needs in reprocessing.

• Monitors and represents Alcon globally on select reprocessing standards committees.

• Collaborates with Marketing, CASs, and HFE's to optimize reprocessing for customers and create global competitive advantage.

• Guides NPI teams globally in developing suitable reprocessing methods, instructions, and requirements.

• Guides engineers during product lifecycle activities relating to reprocessing requirements.

• Provides guidance to reprocessing label development or updates to meet evolving regulatory and customer requirements.

• Provide SME input during regulatory or corporate audits, and regulatory submissions.

• Collaborates with RA/QA and Med Info Teams to develop materials to address customer inquiries.

• Provides SME input for inquiries from customers, regulators, or Alcon staff relating to execution, content, and alternatives to reprocessing instructions.

Major Accountabilities

• Performs corporate level assessments of emerging, newly published, or recently altered standards impacting the reprocessing field.

• Leads critique/evaluation of product design and directions for use with respect to reprocessing objectives. 

• Provides expert technical guidance, maintains local and corporate reprocessing procedures, directs/conducts reprocessing verifications. 

• Works with teams to address reprocessing challenges, design reprocessing methods, and validate methods to support project objectives.

• Develops superior cleaning, disinfection, drying, and sterilization test methods as needed to advance state of the art practices and customer needs.

• Provides QA/RA with summaries or guidance in regulatory submissions, audits, or preparing IFUs.

• Develops in-depth understanding of configuration, application, and engineering of reusable devices, establishes product families and adoption practices.

• Leads efforts to select/approve external labs as strategic partners in developing better reprocessing regimens; develops in house test methods as feasible.

• Collaborates with PSE to ensure technical files are updated as needed to stay compliant to current standards.

• Lead efforts to address customer inquiries, develop FAQ resources with RA/QA or Global Med Info groups.

• Create (or oversee) protocols, coordinate testing, verification reports, needed to support reprocessing instructions.  Identify when reverification is required.

Experience:

10+ years of experience in QSR/EU MDR compliant medical device development including ability to:

• Provide global technical leadership.  Influences effectively in a cross-functional environment (e.g. multi-site, NPI, customer inquiry support)

• Provide SME interpretation of: ISO 11135, ISO 11138-X, ISO 10993-X, ISO 17664-1/-2, ISO 17665-X, ISO 11607-X, ISO 15883-X, EN 13060, EN 285, AAMI ST 79, AAMI TIR 12/30, AAMI ST8, AAMI ST98, ISO 14161, EN 14885, EN ISO 11737-X, FDA Endotoxin and Reprocessing guidelines, RKI Guidance, MHP Central Sterilization supplements.

• Effectively communicate complex concepts in presentations, regulatory submissions, and in technical reports to global audiences.

• Develop reprocessing methods, lead IFU validations, resolve cleaning and sterilization concerns during development.

• Apply detailed knowledge of common microbiological and biochemical laboratory methods (sterility & disinfection testing, protein/TOC/endotoxin assays, etc.)

Key Requirements/Minimum Qualifications:

• Bachelor’s Degree or Equivalent years of directly related experience (or high school+15 yrs; Assoc.+11 yrs; M.S.+4 yrs; PhD+3 yrs) 

• The ability to fluently read, write, understand, and communicate in English.

• 7 Years of Relevant Experience 

• Work hours: M-F, standard

• Travel Requirements: 10%

• Relocation assistance: yes

• Sponsorship available: yes

#LI-DNI

ATTENTION: Current Alcon Employee/Contingent Worker

If you are currently an active employee/contingent worker at Alcon, please click the appropriate link below to apply on the Internal Career site.

Find Jobs for Employees

Find Jobs for Contingent Worker

Total Rewards

Alcon’s Total Rewards programs are designed to align to incentives with business goals, encourage the right values and behaviors, and deliver long-term value.  The first layer of our rewards program is compensation.  We offer a combination of fixed pay and variable pay, which includes short-term incentives, and long-term incentives for eligible population.  Our benefits program provides security for life events through life and disability insurance, supports savings for retirement, promotes good health and well-being and supports associates and their families during times of illness.  To learn more about Alcon’s Corporate Social Responsibility including our Total Rewards, click here

Pay Range

Pay Frequency

Alcon is an Equal Opportunity Employer and participates in E-Verify. Alcon takes pride in maintaining a diverse environment and our policies are not to discriminate in recruitment, hiring, training, promotion or other employment practices for reasons of race, color, religion, gender, national origin, age, sexual orientation, gender identity, marital or veteran status, disability, or any other legally protected status. Alcon is also committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please send an email to alcon.recruitment@alcon.com and let us know the nature of your request and your contact information.

Responsibilities:

• Primary function is to manage activities associated with software changes for a variety of medical device systems.

• Manages/coordinates updates performed by development team, and incorporates updates to software, as needed.

• Ability to manage multiple small-scale projects, or a few larger projects at one time.

• Collaborate closely with software development teams (both on-shore and off-shore), Technical Support, Field Service, Manufacturing, Product Security, Clinical and other organizations to accomplish necessary software changes initiated by reported anomalies, changes in use-cases, material or hardware changes that impact software, cybersecurity, regulatory updates, and other.

• Troubleshoot, and define solutions to meet expectations, and incorporate changes according to defined processes and procedures, in line with industry standards and regulations.

• Maintain configuration management and change control according to the associated product Configuration Management Plan and Change Control procedures.

• Assure compliance to software release procedures for post-Market changes to on-market products.

• Interact with outside vendors, write/modify/convey requirements, and be able to identify and hold outside vendors accountable for their deliverables.

• On a regular basis, monitor project activities and report status, including feedback on blockers, potential changes to project scope and activities, and recommended solutions as appropriate.

• On-site presence required on a regular basis. (Occasional remote work possible, per project demands).

Experience

• BS in Computer Science or other related discipline with 3 years’ experience; or 7 years of relevant experience

• Must have experience leading software development change activities or proven leadership abilities.

• Must understand software design control and be familiar with product-level design control.

• Prefer C++ and C# development experience, and familiarity with object-oriented software design.

• Ability to work cross-functionally with a variety of stakeholders.

• Ability to work independently, proactively identify issues, recommend, and implement solutions, and deliver quality results on schedule while managing multiple tasks and internal customers. Understanding of Window operating environments (Win10, Win7, etc.).

• Experience with one or more software configuration management systems and related tools, such as: Confluence, Jenkins, AWS DevOps, Jira, Git, GitHub, TFS Knowledge of networking and cybersecurity concepts are a plus.

• Experience with Microsoft Visual Studio, ADO, or other integrated development environment (IDE) tool.

• Familiar with FDA/ISO regulations for software development, including IEC 62304 Solid understanding of Software Development Lifecycle Management (SDLC) – (Agile/Scrum, iterative).

• Excellent interpersonal & Communication skills to build positive departmental and inter-departmental relationships in a virtual, remote, and asynchronous environment.

• Medical device experience is preferred

Key Requirements/Minimum Qualifications:

• Associates Degree or equivalent years of directly related experience.

• The ability to fluently read, write, understand, and communicate in English

• 2 years of Relevant Experience

• Work hours: M-F, standard

• Travel Requirements: 0-5%

• Relocation assistance: yes

• Sponsorship available: yes    

#LI-DNI

ATTENTION: Current Alcon Employee/Contingent Worker

If you are currently an active employee/contingent worker at Alcon, please click the appropriate link below to apply on the Internal Career site.

Find Jobs for Employees

Find Jobs for Contingent Worker

Total Rewards

Alcon’s Total Rewards programs are designed to align to incentives with business goals, encourage the right values and behaviors, and deliver long-term value.  The first layer of our rewards program is compensation.  We offer a combination of fixed pay and variable pay, which includes short-term incentives, and long-term incentives for eligible population.  Our benefits program provides security for life events through life and disability insurance, supports savings for retirement, promotes good health and well-being and supports associates and their families during times of illness.  To learn more about Alcon’s Corporate Social Responsibility including our Total Rewards, click here

Pay Range

Pay Frequency

Alcon is an Equal Opportunity Employer and participates in E-Verify. Alcon takes pride in maintaining a diverse environment and our policies are not to discriminate in recruitment, hiring, training, promotion or other employment practices for reasons of race, color, religion, gender, national origin, age, sexual orientation, gender identity, marital or veteran status, disability, or any other legally protected status. Alcon is also committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please send an email to alcon.recruitment@alcon.com and let us know the nature of your request and your contact information.