Total 75 Engineering job vacancies in Oakland, California

• You will be responsible for the development, all related technical issues, and execution of facilities engineering projects.
• You will be a project manager and responsible for successful execution of awarded contracts and successful completion of self-performed inspections.
• You will perform project development duties to include site planning identification of technical deficiency, development of Design/Build scope of work, cost estimates and acquisition documentation necessary for solicitation of appropriate contracts.
• You will prepare and conduct structural calculations and analysis.

• You will follow safety practices and procedures in the operation of vehicles.
• You will interpret instructions or specifications related to bus operations, preventive maintenance, and passenger safety.
• You will load, arrange, and secure cargo into vehicle using techniques and equipment (e.g., chains, binders, straps, tie-downs) for safe transit.
• You will operate vehicles with the gross weight of more than 32,000lbs; vehicles that are oversized and/or equipped with more than one body or two braking systems.
• You will perform minor repairs or adjustments on vehicles.
• You will perform operator maintenance on all vehicles operated.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• You will be required to successfully complete a pre-appointment physical examination.
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.

• You will Install, repair, maintain, troubleshoot, test, and load new and existing electrical lines, circuits, systems, and associated fixtures, controls, and equipment supporting industrial operations or similar complex electrical loads.
• You will plan and lay out the work, tracing hard-to-locate defects or problems and complete repairs and installations with little or no advice.
• You will work from building plans, blueprints, wiring diagrams, engineering, drawings, and electrical maintenance and repair manuals.

The United States Space Force (USSF) Space Systems Command (SSC) Space Launch Delta 30/RM at Vandenberg Space Force Base is searching for a Supervisory Electronics Engineer, Systems Engineering Branch (NH-0855-04, GS 14/15 equivalent).

Description:
The Supervisory Electronics Engineer will lead the Systems Engineering Branch, directly responsible for managing the technical baseline of the Western Range (WR) Launch and Test Range Systems (LTRS) and reviewing/ensuring that launch and range users' requirements can be met with existing systems, or by implementing engineering modifications to provide new capabilities. The Systems Engineering Branch must be a collaborative, fast-paced environment, that achieves rapid results.

This position is an expert within their functional area; heads of branches or divisions; or key program administrators. Conducts or directs activities or assists higher levels on challenging and innovative program development with only general guidance on policy, resources, and planning; develops solutions to highly complex problems requiring various disciplines; responsible for fulfilling program objectives. Results are authoritative and impact programs or the well-being of substantial numbers of people.

The ideal candidate should have knowledge of systems engineering and associated disciplines such as systems engineering plans, test and evaluation plans, life-cycle engineering, operational safety, suitability and effectiveness plans, specs and standards, national environmental policy act, and programmatic environmental safety and health evaluations. Knowledge of a wide range of multidisciplinary professional engineering, asset management, and operations theories, concepts, principles, standards, methods, techniques, materials, and equipment as well as knowledge of standard construction and contracting regulations, practices, and procedures. Knowledge of the principles of facility and infrastructure operations, repair, maintenance, and upgrade principles, theories, concepts, and procedures; customer service operations; and financial management principles and standards. Knowledge of the principles of planning, program management, and standard acquisition regulations, practices, and procedures. Knowledge of safety, security, personnel management, and EEO regulations, practices, and procedures. Ability to analyze, plan, organize, and direct the work operations to meet program requirements and objectives with available resources; and to mentor, motivate, and appraise the staff of an organization. Ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as work in a professional manner with peers, management, contractors, academia, and other agencies. The employee must meet the Defense Acquisition Workforce Improvement Act (DAWIA) requirements applicable to the duties of the position. The employee must possess an engineering degree at the bachelor's level from an institution with an Accreditation Board for Engineering and Technology (ABET) accredited program in electronics engineering or a closely related field is highly desired.

Key Skills and Abilities:
1. Knowledge of the theories, concepts, principles, practices, standards, methods, techniques, and materials of multidisciplinary professional engineering to effectively apply advanced engineering theories, principles, and concepts to new applications, experimental theories, and other areas of responsibility.
2. Knowledge of safety, security, personnel management, and EEO regulations, practices, and procedures.
3. Ability to plan, organize, and direct the functions and mentor, motivate, and appraise the staff of an organization.
4. Ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as work in a professional manner with peers, management, contractors, academia, and other agencies.
5. Knowledge of planning and program management to execute major projects, provide expert advice to colleagues, and present innovative recommendations for advancing programs and/or methods.
6. Ability to research, evaluate, interpret, and apply rules, regulations, and procedures to a variety of situations and to recommend timely and economical solutions.

The United States Space Force (USSF) Space Systems Command (SSC) Space Launch Delta 30/RM at Vandenberg Space Force Base is searching for a Supervisory Electronics Engineer, Architecture and Innovation Branch (NH-0855-04, GS 14/15 equivalent).

Description:
As the Electronics Engineer you will lead the Architecture and Innovation Branch and be directly responsible for developing the future Western Range (WR) Launch and Test Range Systems (LTRS) architecture and injecting innovations to effectively digitally transform the range into a future modernized spaceport that can meet our nation's increasing needs. The Architecture and Innovation Branch is a collaborative, fast-paced environment, that achieves rapid results.

This position is an expert within their functional area; heads of branches or divisions; or key program administrators. Conducts or directs activities or assists higher levels on challenging and innovative program development with only general guidance on policy, resources, and planning; develops solutions to highly complex problems requiring various disciplines; responsible for fulfilling program objectives. Results are authoritative and impact programs or the well-being of substantial numbers of people.

The ideal candidate should have knowledge of systems engineering and associated disciplines such as systems engineering plans, test and evaluation plans, life-cycle engineering, operational safety, suitability and effectiveness plans, specs and standards, national environmental policy act, and programmatic environmental safety and health evaluations. Knowledge of a wide range of multidisciplinary professional engineering, asset management, and operations theories, concepts, principles, standards, methods, techniques, materials, and equipment as well as knowledge of standard construction and contracting regulations, practices, and procedures. Knowledge of the principles of facility and infrastructure operations, repair, maintenance, and upgrade principles, theories, concepts, and procedures; customer service operations; and financial management principles and standards. Knowledge of the principles of planning, program management, and standard acquisition regulations, practices, and procedures. Knowledge of safety, security, personnel management, and EEO regulations, practices, and procedures. Ability to analyze, plan, organize, and direct the work operations to meet program requirements and objectives with available resources; and to mentor, motivate, and appraise the staff of an organization. Ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as work in a professional manner with peers, management, contractors, academia, and other agencies. The employee must meet the Defense Acquisition Workforce Improvement Act (DAWIA) requirements applicable to the duties of the position. The employee must possess an engineering degree at the bachelor's level from an institution with an Accreditation Board for Engineering and Technology (ABET) accredited program in electronics engineering or a closely related field is highly desired.

Key Skills and Abilities:
1. Knowledge of the theories, concepts, principles, practices, standards, methods, techniques, and materials of multidisciplinary professional engineering to effectively apply advanced engineering theories, principles, and concepts to new applications, experimental theories, and other areas of responsibility.
2. Knowledge of safety, security, personnel management, and EEO regulations, practices, and procedures.
3. Ability to plan, organize, and direct the functions and mentor, motivate, and appraise the staff of an organization.
4. Ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as work in a professional manner with peers, management, contractors, academia, and other agencies.
5. Knowledge of planning and program management to execute major projects, provide expert advice to colleagues, and present innovative recommendations for advancing programs and/or methods.
6. Ability to research, evaluate, interpret, and apply rules, regulations, and procedures to a variety of situations and to recommend timely and economical solutions.

• Guides or supports the development of computational materials modeling to describe thermal protection materials performance in mission relevant environments and inform on thermal protection materials selection.
• Guides or supports the development of computational materials modeling to describe composite materials performance in mission relevant environments and inform on material architecture selection.
• Coordinates or participates in meetings and briefings, as necessary, develop technical reports as requested by projects.
• Contributes to or leads proposal efforts and interacts for the Agency with private industry and other government entities.
• Assists in identifying areas of focus for future computational materials modeling development programs.
• Fosters a culture of engagement, diversity, inclusiveness, excellence and innovation. Champions NASAs commitment to Diversity, Equity, Inclusion and Accessibility to create an environment that promotes a commitment to safety, integrity, and teamwork.

• Serves as an Engineering Technician and Advanced Manufacturing in support of the Travis AFB Centralized Air Force Manufacturing Center (CAFMC).
  
• Review and approve organic (Air Force Developed) production level, repair and/or first article TDPs: Reviews design drafting projects (Technical Data packages, 2D drawings, 3D solid models and Engineering Orders (EOs) based on determination of technician's current capabilities.
  
• Performs a wide array of manufacturing engineering technician duties in support of aircraft part repair and origination.
  
• Performs project planning, design, and troubleshooting work for establishing new facility and laboratory plans and for modifying existing floor plan layouts as needed.
  
• Coordinates projects with other engineering disciplines. Applies knowledge of other disciplines to determine coordination required to ensure all design and repair considerations have been addressed.
  
• Participates in discussions, meetings or serves on panels or committees.

• You will act as the central clearing house for all data calls and will act as the Port Engineers agent at all required RMC off-ship meetings and will ensure the port engineers spend as much time on their assigned ships.
• You will monitor and assess Port Engineer (PE) and Combat Systems Port Engineers (CSPE) performance and deliverables as required to support assigned ship.
• You will provide a local focal point for all issues related to the Port Engineer program and Port Engineer performance.
• You will provide timekeeping, leave, Temporary Additional Duty (TAD) approval, and financial oversight of local Port Engineer TAD and annual appraisals.
• You will monitor and certify Port Engineer progress and performance in completing the Port Engineer Training and Certification program.
• You will ensure continued viability of the Port Engineer Program.
• You will provide regular reports on status of assigned ships maintenance to the Type commander.

• You will read and interpret sketches, electrical, or hydraulic schematics for optimal heavy mobile equipment performance.
• You will collaborate with journey level workers to repair heavy mobile equipment.
• You will determine repairs, adjustments, and modifications needed for heavy mobile equipment.
• You will disassemble, inspect, repair, or replace diesel or gasoline engines and parts (e.g., injection valves, cylinder, heads, cylinder sleeves, pistons, rings, connecting rods, bearings, gaskets, crankshafts) during maintenance.
• You will use precision measuring devices such as micrometers, dial indicators, compression gauges, distortion gauges, and injection gauges.

• You will apply knowledge of mobile applications such as Maximo Anywhere, Microsoft Office Suite, and other enterprise software solutions.
• You will plan, schedule, and execute projects and studies aimed at evaluating and recommend improvements, effectiveness and efficiencies of the assigned functions and processes.
• You will use data processing software (e.g., Outlook, Excel, Word, PowerPoint, or similar software) to create reports.
• You will identify program trends through data analysis and direct the implementation of corrective action plans.
• You will plan, direct, control, and administer assigned programs elements and resources in connection with the assigned areas.

• Conducting hydrologic studies to include investigations of surface water, ground water, debris and sediment, and storm events.
• Developing and maintaining an Enterprise Geographic Information System (eGIS) Program Management Plan defining the geospatial architecture.
• Planning, Direction, Review, Evaluation and Organization: Administers work within the section.
• Ensures the performance of appropriate independent technical reviews of engineering work assigned to the section.
• Determines the work to be contracted out to private engineering firms and to other Corps offices.
• Reviews and approves all requests for engineering support to the section, which are agreements on scope, level of detail, cost, duration, and delivery date of technical work.
• Provides guidance to section staff on the technical methods and procedures, including computer software, to be used in doing engineering and GIS studies.
• Resolves problems on technical methods that were raised by local sponsors, higher management, or the public.

What will I do in this position if hired?

In this Interdisciplinary Architect/Civil Engineer position, you will serve as an Architect/Engineer within the FEMA Region 9 Mitigation Division, providing technical assistance for FEMA's hazard mitigation grant programs, with the goal of reducing risk to natural hazards.

Typical assignments include:

• Providing engineering or architectural advisory services to Mitigation staff as a subject matter expert, and collaborating with FEMA staff on identifying, developing, and/or reviewing Mitigation projects for sound mitigation techniques.
• Serving as a regional expert in Benefit-Cost Analysis (BCA) using FEMA-approved software or methodologies to support cost-effectiveness determinations for potential mitigation grant projects.
• Providing technical assistance and training through formal and informal venues to grant recipients and sub-recipients on best practices for developing cost effective BCAs.
• Providing mitigation project application review support through technical feasibility, program eligibility, and cost-effectiveness for the full range of Mitigation grant programs.
• Reviewing architectural designs for sound mitigation techniques and compliance to grant program eligibility requirements.
• Suggesting solutions to accomplish mitigation goals and implementing innovative strategies for leveraging multiple funding sources (for example, leveraging funding from other federal agencies)
• Analyzing data or complex technical information from a variety of resources to prepare oral briefings and written reports for technical and non-technical audiences.

What else do I need to know?

At FEMA, our mission is to help people before, during and after disasters, and every employee at FEMA has a role in emergency management. Every FEMA employee has regular and recurring emergency management responsibilities, though not every position requires routine deployment to disaster sites. All positions are subject to recall around the clock for emergency management operations, which may require irregular work hours, work at locations other than the official duty station, and may include duties other than those specified in the employee's official position description. Travel requirements in support of emergency operations may be extensive in nature (weeks to months), with little advance notice, and may require employees to relocate to emergency sites with physically austere and operationally challenging conditions.

This announcement is for a position as a CORE (Cadre of On-Call Response/Recovery Employee). CORE employees are full-time employees hired to directly support the response and recovery efforts related to disasters. Employees are hired under the Robert T. Stafford Act and are excluded from the provisions of title 5, United States Code, governing jobs in the competitive service. They can be hired under a streamlined process instead of a competitive process. After three years of continuous service, Stafford Act employees may be granted competitive eligibility to apply for permanent full-time positions at FEMA.

This position will be hired into a temporary 4 year, excepted service appointment. Appointments may be renewed based on workload, funding, and supervisory approval.

FEMA is committed to ensuring that its workforce reflects the diversity of the nation. At FEMA, our workforce includes the many identities, races, ethnicities, backgrounds, abilities, ages, cultures, and beliefs of the people we serve. To learn about FEMA's ongoing diversity and inclusion efforts, reasonable accommodation process, and the FEMA Core Values, please visit www.fema.gov.

• You will provide hardware design and/or equipment integration support, guidance and leadership to accomplish customer tasking for major weapon control system such as the Tactical Tomahawk Weapons Control System.
• You will perform research and requirements analysis, design and product development, functional and environmental test and evaluating of prototype equipment and systems.
• You will maintain the engineering hardware support and supply risks of deployed systems which impact the Fleet's mission readiness of related hardware/systems.
• You will support the financial execution related to design and in-service engineering agent tasking, and provide detailed documentation of the financial expenditures and requirements.

The General Engineer:

• Serves as an associate marine surveyor for assigned ships and maintains a working knowledge of assigned vessel characteristics, capabilities, and operational performance. Inspects vessels for material condition and conducts sea trials to assess vessel capabilities, performance, and readiness.
• Participates in staff efforts involving ship reactivation and deactivation plans, voyage repairs, planned maintenance and modernization, and other functions associated with husbanding and maintaining
• Assists in the professional review of engineering and program management functions, generates repair specifications, monitors management systems development and implementation, and prepares operational installation designs and procedures.
• Provides support to the MARAD RRF Logistics Support Program and its systems, the RRF Management System (RMS) and the Excess Processing Program (EPP).
• Maintains awareness of industry best practices, techniques, products and services related to ship repair, preventative maintenance, and lifecycle management.

The ideal candidate has experience and/or mastery of ship operations, maintenance, repair, alteration, logistics support, construction, mission readiness, operational reliability, cost-controls, budgeting, planning, contractor oversight, and quality assurance; knowledge of USCG and class society rules and regulations as well as project management and contracting experience.

• You will perform and provide guidance in the areas of property accountability, asset management, disposition of excess property, inventory procedures, lost and/or damaged property, and administrative adjustment actions.
• You will provide expertise in the areas of implementing and managing DoD, Navy, and Command policy and guidance.
• You will develop, run, and support accountability and management reporting.
• You will develop new and approved techniques and methods required for operation within area of responsibility in accordance with policy and regulations.
• You will schedule, initiate, coordinate, document, reconcile, and gain concurrence on general equipment and operating materials and supplies physical inventories and plans.
• You will develop and implement corrective action plans when inventory accuracy not met or inventory frequency requirements are not maintained.
• You will establish and maintain local command policy and processes for proper management of general equipment and operating materials and supplies.
• You will review regulatory or directive guidance pertaining to assigned functions and brief management on scope and effect on current operations.