Total 75 Manufacturing / Production job vacancies in Fort Drum, New York

• Responsible for organizing and coordinating an effective receiving operation. Responsible for organizing and coordinating an effective storage operation. Performs tasks involved in issuing and shipping items.
• Operates fork lift trucks and automated material handling and identification equipment to include mobile stock selectors and electromechanical automated equipment, such as high rise automated storage and retrieval vehicles to move, stack and unstack, load and unload, bin, and position material.
• Drives one or more types of trucks, such as pickup, panel, and flatbed trucks, which typically have a gross vehicle weight of 10,000 pounds or less, on public roads at highway speeds.
• Maintains records and documents actions.
• Performs material handling duties, including the use of tools and other equipment, in a safe manner, utilizing safety practices and procedures, and complying with established safety rules and regulations.

• Operate vehicles on and off public highways and paved roads.
• Operate a variety of diesel powered equipment.
• Operate various types of forklifts up to 50,000 pound capacity.
• Drive oversized engineer equipment which may be oversized or overweight.
• Perform operator maintenance on motorized vehicles.
• Service vehicle braking systems and lights.
• Take and prepare oil samples for the Army Oil Analysis Program.
• Recognize defective or malfunctioning parts of a motor vehicle.
• Ensure that load weights are secured and weights are properly distributed.
• Read and interpret regulations and technical publications.
• Review specifications of vehicles for load capacity.
• Receive incoming warehouse items and equipment.
• Check items for damage or serviceability.
• Prepare various documents and warehousing reports.
• Load and unload equipment on trucks for shipment.

• Operates straight-in-line trucks, tractors with semi-trailers or full trailers; and/or motor coaches, which typically have an approximate gross vehicle weight of more than 32,000 pounds.
• Connects and disconnects the air brakes and electrical lines.
• Maneuvers vehicles within close tolerance when driving and backing over uneven ground; in narrow or congested areas; between buildings and other vehicles; and when positioning vehicles at loading docks.
• Directs the arranging of cargo or assists in the operation for proper weight distribution and loading/unloading sequence.
• Performs operator maintenance tasks: checks gasoline, oil, water, air pressure, steering gear, horn, brakes, etc.
• Completes trip tickets and fills out reports in case of accident.
• May perform materials handling and packing duties to include receiving, storing, issuing, picking and packing a variety of materials.
• May operate material handling equipment (MHE) such as forklifts to load/unload and move materials.

• Drives a diesel driven cab-chassis truck with an actual GVW of 26,000 lbs. x 40 feet in length, (medical mobile van) ½ ton pick-up trucks, vans, and sedans, to carry out the objectives of the work unit.
• Responsible for the basic maintenance of assigned program vehicles and the loading and unloading of health supplies and equipment used by the Staff.
• Coordinates and documents all required repairs and services with the contracted service agency, assures that the work is accomplished in a timely manner.
• Empties, cleans and sanitizes the unit to ensure it is ready for the next day and checks connections to proper connections for electrical and computer supplies.
• Completes work orders as needed and informs supervisor.
• Provides assistance with explaining the health care practices, health instructions, and health teaching/education presented by the health care/service providers, individual clients, family members, groups, outreach clinics and other community settings.
• Assists with the patient registration process by helping patients in completing forms and ensure forms are signed by patients.
• Assists with clerical duties of patients' medical documents including copying, routing, referrals filing, date entry, etc.
• Assists with health promotion projects/program.
• Cleans the Medical mobile van after each use including floors, counters and equipment. Follows the infection control procedures.

The Boiler Plant Operator uses manual and automatic controls to operate the Boiler Plant in the Operations Section of Facilities Management Service at the Lyons Campus. Performs all duties required to maintain the safe and efficient operation of a high-pressure steam boiler plant and performs all preventive maintenance duties, adjustments and corrective actions as required and necessary.

The Boiler Plant Operator performs all duties required to maintain the safe and efficient operation of a 3500-horsepower high-pressure steam boiler plant, operating steam pressure of boilers between 100 and 135 psi, consisting of five (5) 700-HP fire tube boilers (with economizers) automatic and. manually fired combination oil and natural gas burning. The total capacity is 120, 750 lbs. /hr. with an average output of 40,000 to 45,000 lbs. /hr.

The Incumbent performs all preventive maintenance duties, adjustments and corrective actions as required and necessary. The incumbent operates the feed water system, the steam system, domestic water, natural gas, fuel oil, and local control panels at each individual boiler and the main control panel with plant and boiler master controls along with all associated transmitters and recorders. The Incumbent operates systems and related components. Operations of the feedwater system consists of backflow preventers, water softeners, make-up tank, transfer pumps, a 100,000 lbs./hr. Deaerating Feedwater Heater and feed water pumps. The domestic water system includes a plant water softening system. The chemical feed system includes batch tanks, chemical storage tanks and chemical feed pumps. The natural gas system includes the main gas meter and regulator, solenoid operated cut-out valve, emergency cut-off switches, high and low gas pressure switches, filters, pressure regulators, pilots, solenoid valves, vents, and propane back-up pilot system. But are not limited to:

• Knowledge of principles and methods of operating high-pressure oil and gas-fired boilers and of the methods employed in determining and obtaining efficient combustion.
• Knowledge and ability to perform combustion and efficiency calculations.
• Knowledge to adjust firing rates for best combustion, efficiency and steam production.
• Skills to determine necessary settings and to adjust controls of generating equipment for desired operating conditions and synchronization of equipment with the system.
• Ability to read and interpret precision recording instruments, including valves, piping equipment, gauges, dials, controls, relays, switches and trips, and to record information noted.
• Skill in reading flow meters and charts to determine how much steam is being produced and whether it is meeting demands, how much fuel is being used, and how much water is being evaporated.
• Skills to interpret readings from charts and meters to determine whether to increase or lower fire in boiler, whether to start or stop boiler feed pumps, and to determine how long these are to operate.
• Ability to determine the type and amount of chemicals that need to be added to boilers for treatment of boiler water in order to control corrosion and scale formation.
• Has skill and knowledge to operate hand and power tools; Uses electrical tools, tools of the trade such as pipe wrenches, tap and die, hammer, drills, power equipment, pick and shovel, portable pumps and grease guns.
• Ability to understand and execute written and oral instructions and relay instructions to follow-on shifts
• Ability to communicate effectively with supervisor, other operators and plant personnel.

Our client is a top-tier global pharmaceutical powerhouse, committed to pushing the boundaries of medical innovation and delivering breakthrough treatments to patients worldwide. Be a part of a mission to transform healthcare and make an impact on patients' lives.

As the Senior Production Engineer, you'll be at the forefront of R&D manufacturing operations.

Your Role:

• Manage R&D manufacturing operations and be a technical expert in the process.
• Refine manufacturing techniques, lead method validation projects, and be the go-to expert for training operators on Standard Operating Procedures (SOPs).
• Documenting crucial process safety and risk assessments, maintaining the highest standards of excellence.

Requirements:

• Background in a regulated manufacturing environment (pharmaceutical or biotechnology preferred).
• Master's or PhD in Chemistry, Chemical Engineering, or Pharmaceutical Sciences.
• 5+ years of hands-on experience in formulation development.
• In-depth understanding of GMP, process development, validation, and pharmaceutical quality systems.
• Proven track record in pharmaceutical formulation development and technology transfer.

If you are interested, please apply with your CV attached.

• Perform gardening tasks following seasonal schedules and project plans.
• Operate a variety of gasoline and diesel powered farm type tractors and vehicles.
• Utilize a variety of gardening equipment, hand and power tools in the performance of gardening maintenance duties.

• Operates one or more types of heavy gasoline or diesel powered engineering and construction equipment
• Operates motor grader on flat or rolling terrain where exact specifications are required in grading unpaved roads for surfacing with clay and gravel
• Drives various vehicles (e.g., utility truck or similar vehicle (primarily under 10,000 gross vehicle weight) to and from the work site
• Operates close to buildings, trees, drop-offs, rocks, or other obstructions on all types of terrain and therefore, requiring increased operating control relevant to the complexity of the equipment
• Operates crawler type and mobile truck cranes to move earth, dig ditches and for other operations where maneuverability if not a major problem and accuracy is not critical

• Receives, examines and determines the condition and disposition of a wide variety of materials.
• Reviews disposal turn-in document accompanying material. Compares data against property assuring correct information and proper documentation (e.g. stock number, nomenclature, quantity, unit of issue, disposal authority code, DEMIL, condition code).
• Visually inspects usable property for obvious signs of condition and determines acceptability.
• Determines condition and reportability and special handling requirements (e.g., hazardous material, precious metals, security, DEMIL, Special focus items, etc.) and assigns appropriate classification instructions for warehousing.
• Verifies accuracy of demilitarization codes, takes action to challenge questionable items/codes, and maintains segregated storage of property requiring DEMIL.
• Ensures proper certification is attached to turn-in document when demilitarized by host or generating activity.
• Performs special and periodic inventory of property; re-palletizes/re-locates property as necessary.
• Operates forklifts and related materials handling equipment to move, load and unload, stack or un-stack palletized materials, supplies, and equipment.

About Us

Established since 1929, ALVANCE British Aluminium, part of the GFG Alliance, owns and operates the last remaining aluminium production plant (smelter) in the UK and a connected hydropower electricity generation station located on the slopes of Ben Nevis, Britain’s highest mountain. A combination or renewable energy sources makes this site one of the greenest metal production plants in the country

Roles and Responsibilities

• Record And Report/update all Dam Levels, Water Readings to Hydro Mechanical Engineer – Daily.
• Carry out regular safety inspection on intakes security fencing signage etc across the schemes and action critical repairs on a timely manner.
• Hydro Scheme Maintenance including but not limited to

• Clean Intakes regularly.
• Clean Screens across the Lochaber and Spey schemes.
• Support regulatory checks & inspections
• General Hydro Scheme Maintenance
• Road Maintenance.
• Grass and Scrub management around Dams and Intakes.
• Tree Cutting
• Fencing
• Winter Maintenance – Plough and Grit Access Roads paths etc.

• Supervision and assist contractors working on the hydro schemes
• Condition inspections of the assets
• Valve operation – pipeline filling, emptying, maintenance, scouring
• Photography and IT skills (basic)
• Isolation of Hydro Scheme & power station infrastructure (to level of IO training)
• Support the Lochaber Hydro Operators where required.
• Support estates maintenance where agreed with the Mechanical Engineer.
• Other duties as instructed to support the hydro scheme, Smelter & estates.

Working with Us

We work collaboratively with high energy and ambition to develop sustainable growth plans for our business, our future and our careers.
We are committed to uncompromising levels of safety, strong customer-centricity and diversity. Our people are our greatest asset.

If your true passion in life is to help create a better world through the work that you do, we would encourage you to think about Alvance British Aluminium, part of GFG Alliance You will have the opportunity to thrive, make a difference and leave a legacy to both industry and society.

Hours of work

DAY SHIFT

39H PER WEEK.

OVERTIME PAID

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around bringing our robot to market. You may be remunerated with a combination of salary and share options. This internship requires a candidate to have both an engineering background and a reasonable business acumen. Great communications skills are required as we work with many external contract manufacturers.

1. Pushing our product to pilot production (design for manufacturing, design for reliability, design for user-friendliness)
2. Connecting manufacturers and our R&D team to build and iterate on our prototype, creating new avenues for manufacturing at scale, manufacturing for reliability
3. Sourcing for and testing appropriate equipment and materials for R&D
4. Visiting industry trial sites, giving appropriate feedback to product development team
5. Speaking to industry players, ground workers, understanding the process of tile grouting to help us shape our solution, especially from an operational point of view
6. Hiring, recruitment, and outreach
7. Any other operational duties

A great candidate would possess the following:

• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back of the envelope calculations
• Keenness to do more than is expected, impact driven
• Growth mindset driven

Our development process is very iterative and agile. Thus, there would not be a concrete plan more than 2 weeks ahead and your role/tasks is/are likely to evolve over time. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. You would thus play a significant part in deciding how your work would contribute to our overall goals. Please email your resume to careers@fabrica.ai if you are interested. Thank you

Responsibilities

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

Competency Requirements

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units