Total 1,554 Maintenance / Repair job vacancies in newport rhode island

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Co-ordinate on quality matters with project team, conduct regular inspection to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA's good industry practice.

Ensure that all project quality records and quality audit plans are maintained, assist in yearly ISO audit.

Prepare Quality Control Plan, procedures and QA/QC reports.

Inspect the final output, comparing it to the requirements and approving or rejecting the final products.

Knowledge of welding inspection and ISO standards, familiar with CONQUAS, Green Mark and other essential BCA requirements.

In-depth knowledge of quality control procedures and legal standards.

Good verbal and written communication skills.

Willing to travel to various sites.

Prepare Inspection Test Plan (ITP).

Prepare document submission for client's approval.

Compile and receive relevant material certificates and test report from suppliers.

Co-ordinate with relevant testing laboratories for material testing and witnessing.

Assist the project team on QA/QC matters.

Good understanding of construction industry practices and standards in particular metal works and facade works.

Degree / Diploma in Civil Structural Engineering or equivalent.

Minimum 2 years relevant experience in metal work and facade industry.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Responsibilities

• Carrying out the maintenance of production and auxiliary machinery according to the Quality/ Environmental Procedures and Works Instructions.
• Plan and organize the preventive maintenance programs for all plant equipment and facilities.
• Liaise with Production Department to ensure that all scheduled equipment maintenance and repairs are carried out on time to enable smooth production operation.
• Maintain proper records of all electrical drawings and activities.
• To constantly participate in brainstorming ideas to develop and fabricate machinery, jigs & fixtures in support of the production processes.
• Train and develop Technician and helper so that maximum effectiveness and good performance are achieved and maintained.
• Maintain work discipline and motivate subordinate, setting standard for performance review
• Control and maintain sufficient manpower through proper managing of the subordinate attendance to meet the daily work requirement
• Recommend replacement for turnover and new addition.
• Implement safety program and enforcing the practice by the subordinates

Job Requirements

• Knowledge in PLC and able to work with different brands.
• Bilingual in English and Mandarin or Malay.
• Minimum ITE Cert or Diploma in Electrical Engineering
• Preferably experience in Safety activity
• No Color Blindness

Albatec is looking for a Warehouse & QC Technician to work with us in a dynamic and clean environment. Candidate to have self-consciousness in safety and assist in maintaining warehouse cleanliness and safe working environment.

Requirements

• Minimum Higher-Nitec and above
• Possess Forklift license or Class 3 license
• Knowledge on the use of measuring instruments, i.e. vernier caliper, micrometer, etc

Responsibilities

• Arrange warehouse inventories, maintain cleanliness and housekeeping
• Operate material cutting band saw
• Operate pin stamp machine for material marking
• Conduct visual and dimensional inspection of components and material stock
• Post-process machined materials e.g. deburring, polishing, etc
• Unpack and pack goods for inspection and delivery respectively
• Assist in machine maintenance

Job Description

• Assist in installation of dehumidifiers at residental/retail
• Deliver and collect dehumidifiers to and from sites as necessary
• Carry out repair works to faulty dehumidifiers at warehouse or on site
• Carry out servicing of dehumidifiers at clients site

Job Requirements

• Class 3 driving licence
• Physically fit- Will be required to lift heavy loads
• Forklift license
• Willing to learn
• Previous experience in air conditioning installation will be an added advantage
• Familiarity with common repair tools and equipments

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

Royal Mail is something special, a well–loved brand people can rightly be proud of. We have the assets, the infrastructure and the scale that others don’t, yet we are a big part of the communities we operate in, making billions of precious deliveries each year. Our people are at the heart of our business and are integral to helping us to utilise the latest technology and business approaches to optimise, automate and digitise our operations.

Job reference: 312484
Location: Newport Workshop

Are you looking for stability and variety in your next move? Join the largest, and greenest, fleet operator in the UK and take on a new challenge in a commercial vehicle workshop environment.

We’re recruiting an IMI Level 3 qualified mechanic at Newport Workshop on a Permanent contract, with the potential to earn over £45,000 per annum including overtime.

Working Hours: Full time
- 39.5 hours per week (rotating shift pattern; week 1: 06:00
- 14:30, week 2: 09:30
- 18:00). You will be required to work 1 in 3 Saturdays (with a weekday day off)
What’s in it for you?


- Salary: £38,114 per annum.
- Additional weekend supplement on Saturday (£50 per shift) is applicable.
- 22.5 days annual holiday (plus bank holidays), rising with service and with the option to purchase more.
- An excellent company matched pension scheme and financial benefits.
- The chance to develop your career, including a customised annual training and development plan.
- PPE and image clothing supplied (including overalls and steel toe capped boots).
- Exclusive discounts on shopping, tech, travel, days out and socialising for you and the family.
- The chance to work for the Environmental Fleet of the Year 2024.
A bit about the role

With a Fleet of over 49,000 vehicles, including traditional fuel and electric vehicles, LCVs and HGVs, maintaining our vehicles is a true team effort. We’re investing in modernising our fleet, giving you the opportunity to work on a variety of makes and models. There’s never been a better time to join Royal Mail as a Vehicle Technician.

- You’ll perform a full range of inspections, diagnostic, maintenance, and repair procedures on a range of vehicles, trailers, and mechanical equipment.
- You’ll use your own personal toolkit to undertake routine maintenance and repair light / heavy goods vehicles.
- You’ll also have access to specialist tooling and shared equipment in our modern, fully equipped workshops.
A bit about you

- Qualified mechanic: you’re fully qualified to an advanced level (IMI Level 3 in Light or Heavy vehicle or equivalent). You’ve got your own toolkit for standard repairs.
- Varied vehicle experience: Proven Vehicle Technician experience working on a wide range of vehicles, for example LCV / HGV.
- Valid UK driving licence: You hold a full manual UK driving licence.
- High working standards: you take pride in your work and do what is necessary to make sure the job is done effectively.
- Flexible to service demands: you’re able to work on a flexible shift rota. You’re always willing to support your team where necessary.
Interested? Click ‘Apply Now’ to make sure you don’t miss out of this fantastic opportunity.

Trust is the foundation of everything we do at Royal Mail. We aim to be transparent about the qualities we seek and build trust from the start of your journey with up. Your interview is the first step, and we want you to shine. To help you prepare, we’ll provide you your interview questions in advance. This ensures you can present your best examples. At Royal Mail Group, we value trust and our people.

JOBS DESCRIPTION

• Discuss problems with car drivers or vehicle operators to discover faults
• Listen to engines, fit and operate special test equipment, and test-drive vehicles
• Repair or replace worn or faulty parts by removing assemblies such as engines, transmissions, differentials or steering gear; dismantling them and checking parts, referring to manuals as necessary.
• Reassemble, test, clean and adjust repaired or replaced parts or assemblies, using various instruments to make sure they are working properly and putting them back into the vehicle.
• Diagnose, repair and replace engine management and fuel injection components
• Additional duties as assigned by Supervisor.

JOB REQUIREMENTS

• Ability to work with minimum supervision
• Passionate in motor vehicles
• Humble and willing to learn
• Good working attitude
• Preferably with at least 2 years hands-on experience in Automotive Industry
• Possess Certificate in Motor Vehicle Mechanics or Automotive Technology would be an advantage
• Class 3 driving license would be an added advantage.

Send resume and expected salary to: daphne@maximusracing.com.

Only selected candidates will be notified.

The Assistant Chemist/Lab Technician reports to the Lab Manager and is responsible for the below:

Responsibilities

Sample Preparation

• Receive and label all samples brought into the lab for accountability.
• Prepare samples from drying, crushing, splitting and pulverising.
• Mix fluxing reagents and load samples in furnace for the fire assay.
• Mix reagents for acid digestions.
• Perform fire assay techniques such as fluxing, fusing and cupellation of samples in correct numerical order.
• Perform smelting and sample extraction of precious metals as and when required

Recovery of Precious Metals such as Gold and Silver via Fire Assay techniques

• Assist with the recovery of precious metals such as Gold and Silver using Fire Assay techniques.

Measurement & Calibration

• Monitor analytical processes and take remedial action where deviations / discrepancies arise impacting on the quality of analytical results.
• Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab Manager

Perform Laboratory Data Analysis and Reporting

• Testing of precious metals scraps through cupellation method (fire assaying).
• Evaluate, validate, ensure and report technical accuracy of reporting analytical results
• Monitor analytical processes and take remedial actions where deviations / discrepancies arise impacting the quality of analytical results.
• Re-analyse analysis samples when control results are not within the acceptable range.

Quality Control

• Inspect samples, fusions, lead buttons and prills to ensure the assaying method is correct.
• Maintain records and accountability of materials (samples and standards) and equipment used.

Equipment Maintenance and Troubleshooting

• Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab manager.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• Assist in the general / preventive maintenance of equipment and housekeeping of the laboratory.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Laboratory Housekeeping

• Ensure and maintain work areas and equipment are clean, tidy and organised.

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Promote and implement workplace safety initiatives.
• Ensure and maintain proper sample disposal of waste such as cupels and fire assay lead.
• Wastes or water generated as a part of daily work performed in a safe manner and in compliance with the disposal regulations and requirements.
• React appropriately and immediately to emergency situations and assists other employees in maintaining readiness to respond to emergencies within the workplace.

Job Requirement

Educational & Professional Qualifications

• Minimum Diploma qualification in Chemistry or its related field.
• Knowledge in safe handling of industrial chemicals.
• Possess effective verbal and written communication skills.
• Fearless of hot environment.
• Able to lift 10kg bars of precious metals.

Relevant Experience

• Problem solving skills.
• Have experience in selecting and setting up of equipment and processes to recover precious metals including gold, silver, platinum, palladium, rhodium is an advantage.
• Possess experience and the ability to operate ICP / XRF is an advantage.
• Must be willing to work overtime whenever necessary.

The Senior/Facilities Executive is responsible for ensuring the smooth and efficient operation of a facility, focusing on maintenance, safety, and operational needs. This role involves managing day-to-day facility activities, coordinating maintenance and repairs, and supporting a safe and productive environment for employees and visitors.

Key Responsibilities:

• Oversee daily facility operations, including maintenance, cleaning, and security.
• Coordinate and supervise contractors, vendors, and maintenance personnel for repairs and installations.
• Monitor and maintain facility equipment, ensuring proper functioning and regular servicing.
• Conduct routine inspections to ensure health, safety, and environmental standards are met.
• Manage facility inventory and supplies, ensuring availability of essential items.
• Respond to facility-related emergencies and issues promptly and effectively.
• Assist with budget preparation and manage expenses related to facility maintenance.

Qualifications:

• Diploma/Bachelor’s degree in Facilities Management, Business Administration, or a related field (preferred).
• Proven experience in facilities management or a similar role.
• Strong understanding of facility systems, including HVAC, electrical, and plumbing.
• Good organizational, communication, and problem-solving skills.
• Proficiency in facility management software and MS Office tools.

KEY DUTIES AND RESPONSIBILITES:

• Perform various activities and tasks required in the tablet coating production areas.

• Operate all relevant equipment, clean, assemble and maintain the cleanliness of the equipment.

• Perform and maintain the documentation of operations in accordance with cGMP requirement.

• Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.

• Perform online monitoring of in process parameters / checks throughout the batch.

• Complete all relevant records and other documentation required for tablet coating, maintenance and cleaning of equipment in the work area.

• Perform all activities in accordance with cGMP.

• Maintain the cleanliness of work area to ensure cGMP compliance.

• Perform all other relevant duties required to meet the schedule.

• Check relevant material and product details against batch document

• Co-ordination with Engineering for break down rectification of coating and related solution mixing equipment.

• Involve in equipment / process qualification.

• Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.

• Ensure compliance to GxP / Safety / Quality policies.

REQUIREMENT

• Good understanding of safe working practices and cGMP.

• Experience in tablet coating of oral solid dosage manufacturing is preferred.

• A good team player with positive learning attitude.

• Willing to work in Tuas area, in cleanroom environment with full gowning.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology / Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines

• With 2-5 years of manufacturing experience in Pharmaceutical or related industries.

• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

Job description

Serve as the primary point of contact for 1st and 2nd line IT support within Northern Marine Group, focusing on the Singapore office. Additionally, support the wider vessel support team by assisting with IT incident management and vessel-related projects. The role includes occasional travel within the Asia Pacific region to provide IT support on vessels and at site offices.

• React quickly and professionally to service desk incidents and requests that are submitted onshore and offshore via the Self Service Portal

• Responding to support requests for hardware such as, but not limited to, PC’s, Laptops, Mobile devices and Printers

• Responding to Service Requests that relate to, but not limited to, access/application/hardware requests, New Joiner/Leaver requests and standard requests that are submitted via the Self Service Portal.

• Provide knowledge base articles to be consumed by the end user – with the objective of reducing calls by empowering colleagues to search knowledge base for guidance/process or procedures prior to engaging the Service Desk.

• Collaborate with other Northern Marine IT teams to facilitate change and introduce new services to the business.

• Collaborate with Infrastructure Services Team for any incidents and changes aligned to network/storage hardware located in Singapore office

• Attend Vessels that have been brought into management/require refresh to facilitate installation/refresh of hardware.

• Identifying CSIP (Continuous Service Improvement Process) items that may improve how the Service Desk functions

• Ensure that the Asset Database is always maintained.

To be considered for this opportunity, candidates are expected to have a good understanding and awareness of the following technologies:

Networking and Hardware support

Desktop & Printer Hardware support

Windows 10 support

Server 2016/2019 Admin

Windows Server 2008/2012/2016 including AD, DNS, DHCP

Virtualization technologies such as Hyper-V and VMware

Wi-Fi Technologies (Unifi)

Active Directory Administration

Office 365 Admin

Remote access experience and remote support

Certifications in the following areas would be a significant advantage:

HNC/HND or equivalent experience in IT related subject

Job summary

Strong understanding of IT systems, including both hardware and software components. Proficiency in troubleshooting and resolving technical issues. and must be able to travel and board vessels as required for on-site support and maintenance.