Total 539 Others maintenance repair job vacancies in Singapore

JOB SPECIFICATION & RESPONSIBILITIES

OBJECTIVES

1. To assume full responsibility for the cost-effective operation of the Engineering Department.
2. To prepare the annual and revised Engineering budget in close co-ordination with the Financial Manager and Management, commensurate with operational requirements of the property.
3. To keep accurate records and monitor closely all Engineering budget expenditures, and to ensure that the budget is adhered to and costs strictly controlled.
4. To allocate and countersign all invoices chargeable to the Engineering budget before being processed and charged.
5. To establish an efficient system for the control and verification of all fuel deliveries to the premises.
6. To ensure the repair works being carried out in most economical and effective manner.
7. To supervise closely all engineering personnel in the performance of their duties.
8. To delegate duties and responsibilities, as required, to the Assistant Maintenance Manager.
9. To develop and implement a Comprehensive Preventive Maintenance Programmed for all equipment in the Hotel. 
10. To co-ordinate and, if so requested, supervise special projects and employment of outside contractors.
11. To establish a well-organized Engineering Store and keep close control on consumption of material, stores and inventory control.
12. To implement a comprehensive elevator emergency procedure and initiate employee training on emergency release procedures with the elevator manufacturer’s agent.
13. To advise management on all matters of potential improvement to the operation.
14. To assist the purchasing department with suggestions for the most economic purchase of parts and consumable and to issue clear and concise purchase request for such items.
15. To be knowledge of statutory legislation in employment and industrial relations.
16. To control and monitor closely all utility consumption, and to ensure optimum energy usage by all departments in the Resort.
17. To observe energy efficiency of all equipment, forwarding to management suggestions for replacement of energy inefficient equipment and to report to management all wastage of energy.
18. To assume full charge of building maintenance which includes guest room, public area, kitchen and all back of house. 
19. To establish a regular planned guest room servicing programmed in accordance with industry standards.
20. To supervise major repair and maintenance of Electrical and Mechanical Services.
21. To be fully in charge and responsible for the smooth function of the Department’s administration and maintenance of an efficient filling system.
22. To make sure that all documents related to the operation of the department are being kept up to date, and that all records are correctly maintained and filed.
23. To assume full responsibility for the preparation and timely submittal of all reports.
24. To maintain a comprehensive library of manuals and parts lists of all operational equipment, as well as a complete set of up to date drawings of all areas and systems.
25. To perform an annual evaluation of all Engineering personnel.
26. To ensure that all employee report for duty punctually.
27. To ensure that all employees wear the correct uniform and name tag at all times. 
28. To create an efficient and professional team of employees.
29. To implement department training programmed ensuring the necessary skills of all employees to perform their duties with the maximum efficiency.
30. To ensure that all Engineering staffs are fully familiar with and have a complete understanding of handling Mechanical & Electrical equipment’s.
31. To select and recruit, in conjunction with Human Resource Office, suitable employees for the operation.

OTHER RESPONSIBILITIES

1. Lead, direct and guide in all areas of Engineering matter.
2. Administers the Policies and procedures within the Maintenance department.
3. Follow through all actions required to be carried out by Engineering department. 
4. To monitor and to ensure the preventive maintenance programme being carry out.
5. To supervisor and monitor those works carry out by outside contractor.
6. To follow up & coordinate with purchasing department on delivery and selector of material. 
7. To monitor and to ensure the mechanical and electrical equipments are operating at its optimise manner.

General

1. To perform any other duties that may be assigned from time to time by the Management.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave
• Open culture
• Personal development opportunities
• Paid training and development

Job Description:

• Responsible for scheduling as well as manage corrective and preventive maintenance in the mill.
• Responsible for the quality assurance of the whole product life cycle.
• To identify failures and implement corrective actions and follow-up.
• Oversee inspection and testing of incoming and outgoing product to confirm quality conformance to specifications and quality deliverables.
• Responsible for establishment of effective production process flow in the sense of maximizing the process capability and reject prevention based on real process study.
• Performing audit to the existing manufacturing processes to ensure the smoothness of processes and facilities.

Requirement:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Chemical), and or other related field.
• At least 2 year(s) of working experience in the related field is required for this position. 
• Fresh graduates/Entry level applicants are encouraged to apply.
• Ability to communicate in Mandarin would be a significant advantage as the job required to be able to communicate with China Expatriate.

Perks & Benefits

• Accomodation Benefits
• Medical insurance / GPA
• Annual Leaves / Medical leave
• Paid training and development

職位描述：

• 負責工廠的調度以及管理糾正性和預防性維護。
• 負責產品全生命週期的品質保證。
• 識別故障並實施糾正措施和後續行動。
• 監督進出產品的檢驗和測試，以確認品質符合規格和品質交付成果。
• 負責建立有效的生產流程，在實際製程研究的基礎上最大化製程能力並預防廢品。
• 對現有製造流程進行審核，以確保流程和設施的順利進行。

要求：

• 候選人必須至少擁有工程（化學）和/或其他相關領域的文憑/高級/高級/研究生文憑、學士學位/研究生文憑/專業學位。
• 該職位需要至少 2 年相關領域的工作經驗。
• 鼓勵應屆畢業生/入門級申請人申請。
• 能夠用普通話溝通將是一個顯著的優勢，因為這項工作需要能夠與中國外籍人士溝通。

津貼和福利

• 住宿福利
• 醫療保險/GPA
• 年假/病假
• 有薪培訓和發展

Job Description

• Industry/ Organization Type: Cargo & Container Leasing
• Position Title: Maintenance & Repair Manager / M&R Manager
• Working Location: Bugis
• Working Hours: 5 days (Monday to Friday 8.30 AM – 5.30 PM)
• Salary Package: Basic Salary up to $7,000 + AWS + Performance Bonus + Transport Allowance
• Duration: Permanent Role

Key Responsibilities

• Responsible for the technical management of the tank containers within a defined geographic area (Asia)
• Arrange and coordinate timely delivery of the repair and modification estimates supplied by the depot workshops
• Evaluate correctness and ensure complete and accurate administration
• Coordinate and/or conduct the surveys and inspections on the tank containers
• Coordinate the repair process at the depots and monitor the progress of repairs and modifications
• Monitor cost control of the service providers in your region
• Provide Technical support/troubleshooting when needed
• Control of the stock and repair overviews
• Build and maintain a working relationship with the service providers, subcontractors, and suppliers
• Perform Depot audits as required
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Engineering, Administration, Facility Management or equivalent
• Has a minimum of 5 years of working experience, preferably at a tank container depot
• In-depth knowledge of Dangerous Goods Transport (worldwide)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68000 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description:

• Assist HOD and supervise a team of technicians in delivering technical advices/ support to the various business units
• Actively involved in job estimation and WIP (Work-In-Progress) tracking
• Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems
• Manage and supervise the Maintenance, Repair & Overhaul (MRO) tasks allocated to the section in supporting commercial products, company's proprietary and non-proprietary products
• Deliver allocated and ad-hoc tasks within stipulated timeline and cost
• Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost
• Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches, studies and make necessary recommendations
• Submit investigation reports to relevant authority for approval
• Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained
• Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components
• Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible
• Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts
• Perform other related duties as assigned

Job Requirements:

• Degree in Mechanical/ Mechatronic Engineering
• Experience in Component MRO in related industries
• Experience in effectively leading a team of Technicians
• Experience in SAP System is advantageous
• Knowledge in Army systems will be an added advantage
• Ability to read and interpret schematics and datasheets
• Strong technical skills in troubleshooting Engine, Transmission or Gearboxes
• Competent in Mechanical/Mechatronic system
• Familiar with components testing
• Ability to read and interpret Engineering Drawing and datasheets
• Good communication skills and a strong team player
• Able to work under pressure and tight timeline
• Good analytical and problem-solving skill
• Able to read Manual and Engineering Drawing for any re-engineering work required

Carpentry supervisor
Working Day: 6 days
Working Hours: Monday - Saturday 8am - 5pm
Location: Woodland Industrial
Salary: $2800- $3500 ( Depend of experience)

Job Description:

• Supervise carpentry staff and provide direction
• Monitor and inspect work to ensure quality
• Perform maintenance, repairs, or installation of carpentry projects
• Take measurements and calculate the size and amount of material needed
• Cut, shape and other material according to measurements

Requirement:

• At least 3 years relevant working experience
• Understand detail drawing of carpentry
• Experienced and ability in this field of work such as to fabricate complicated carpenters and installations
• Able to arrange site works for workers

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Duties & Responsibilities:
(1) Uses a wide variety of inspection techniques to inspect standard electronic systems such as radar, radio communications receivers, and transmitters (single band, UHF and VHF), mobile subscriber equipment (MSE), missile guidance systems, laser range finders, and electronic fire control systems. In addition, may inspect heavy mobile artillery, small arms, powered support, optical, and other equipment or components of equal or lesser complexity.

(2) Conducts inspections, diagnoses nature and extent of equipment malfunction, and as required, performs required maintenance to restore to a serviceable condition various types of tactical computers, radio sets, etc. Uses various types of test equipment such as systems tests sets, frequency meters, standing wave indicators, oscillators, AN/GRM-122s, and other electronic testing devices to inspect equipment and components. Inspects equipment when received to determine repairs needed and parts required.

(3) Inspects equipment to determine repairs needed. Utilizes established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s). Considers a variety of factors such as cost and availability of parts, man-hours, and impact of time constraints on the mission to assess whether repair is economical. Recommends to a higher echelon to condemn equipment when the repair cost exceeds the established MEL. Prepares lists of needed repairs, parts, and man-hours authorized. Performs in-process inspections to assure that equipment is being repaired in accordance with pertinent requirements. Performs final inspection, certifying that equipment is in satisfactory operating condition, or rejects the work and returns the equipment to the repair shop with specific reports prescribing additional repairs.

(4) Inspects the full range of equipment as described above at remote worksites in support of field organizations, field units during field exercise training periods, or before major pieces of equipment are sent for repair to a supporting maintenance facility. Serves as inspector on Command Maintenance Evaluation Teams (COMET) and/or as a member of Maintenance Assistance and Instruction Teams (MAIT).

(5) Performs other as duties as assigned.

Job Description

• Industry/ Organization Type: Shipbuilding and Repairing Service Provider
• Position Title: Ship Repair Engineer (Marine)
• Working Location: West (Nearest MRT: Clementi)
• Working Hours: 5.5 days (Mon-Fri: 8 am-5 pm, Sat: 8 am-12 pm)
• Salary Package: Up to SGD 4500 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Conduct repair operations and oversee them meticulously onboard vessels, in port areas, anchorages, or shipyard settings.
• Manage and oversee the scheduling and execution of projects to ensure prompt completion.
• Perform assessments and determine cost estimates for repair requests.
• Understand technical drawings.
• Generate detailed technical and service reports, compile worklists, and maintain comprehensive documentation.
• Foster strong, collaborative relationships with clients and colleagues across all organizational levels.

APPLY NOW!!!

• Min. ITE in Marine / Mechanical Engineering
• Min. 3 years experience in a similar capacity in marine industries
• Proficiency in Microsoft Office
• Comfortable working on weekends if required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

The duties of this position include but not limited to:

• Starts, stops, and regulates the utilities and their system components.
• Ensures that steam pressure is maintained at all times.
• Responsible for changing charts, receiving fuel oil shipments, monitoring the central liquid oxygen levels, and preparing orders for materials and/or services.
• Provides preventative maintenance according to predetermined routine guidelines on various mechanical equipment and systems.
• Makes decisions based on data trends to determine the need for adjustment and/or repair.
• Follows instructions and operating procedures and conveys ideas both orally and in writing.
• Troubleshoots, maintains, and repairs system components.
• Resolves emergency heating, ventilation, and air conditioning calls.

This is a fantastic opportunity to develop your career as Mechanical Repair Technicians working for a respected market leader.

My client, a well-known international organisation in the manufacturing and repair of large and small power tools, are looking for 2 mechanical professionals to join their team in Uddingston

this role will be on a temporary ongoing basis.

The role will involve diagnosing and rectifying faults on various types of machinery, servicing machines before they are sent back to the client and working closely with the Repair Team to advise on any product faults.

They offer........

* Salary bracket £13.30 - £15.38 per hour dendent on experience

* Hours are Monday to Friday, 8am to 4:30pm. 37.5 hours per week

* Full on-going training and support in all aspects of mechanical repair

* The opportunity to build a fantastic career and in time move into other areas such as mobile service engineering

Successful candidates requirements :-

* Recognised Apprenticeship in a mechanical field or equivalent qualifications, electrical knowledge is advantageous

* Ability to diagnose and repair a variety of tools and machines

* Self-motivated and able to work to deadlines accurately with minimal supervision

* Enthusiastic team player who exhibits a strong desire to learn new technology

If you are interested in this outstanding opportunity and up for a new challenge then please send you CV

Should you require any support or assistance, please contact your local Gi Group office.

Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, pledge members for Neurodiversity in business, Disability committed members, Silver status pledge members for the Armed Forces Covenant, and Bronze trail blazers for Racial Equality matters.

Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role.

We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website.

Proud member of the Disability Confident employer scheme

Job Description

• Industry/ Organization Type: Shipbuilding and Repairing Service Provider
• Position Title: Ship Repair Engineer (Marine)
• Working Location: West (Nearest MRT: Clementi)
• Working Hours: 5.5 days (Mon-Fri: 8 am-5 pm, Sat: 8 am-12 pm)
• Salary Package: Up to SGD 4500 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Conduct repair operations and oversee them meticulously onboard vessels, in port areas, anchorages, or shipyard settings.
• Manage and oversee the scheduling and execution of projects to ensure prompt completion.
• Perform assessments and determine cost estimates for repair requests.
• Understand technical drawings.
• Generate detailed technical and service reports, compile worklists, and maintain comprehensive documentation.
• Foster strong, collaborative relationships with clients and colleagues across all organizational levels.

APPLY NOW!!!

• Min. ITE in Marine / Mechanical Engineering
• Min. 3 years experience in a similar capacity in marine industries
• Proficiency in Microsoft Office
• Comfortable working on weekends if required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

SMART Repair Technician
Hayes
Upto £41,954 basic + Bonus + overtime - OTE £54,000
Monday to Friday 0830am-530pm
Ref : OC19198

We are looking for a SMART Repair Technician to join our clients fantastic company in Hayes. They are a very well-known company and have branches all across the UK. The successful SMART Repair Technician will be proud to be a part of our family securing an excellent career.

Company benefits :
* Generous holidays
* A competitive company pension scheme
* Modern workshop facilities and equipment
* Development and progression opportunities

SMART Repair Technician Key Responsibilities:
* Carry out SMART repair work to a high standard on a variety of vehicle
* Ensure that all repairs are completed safely, efficiently, and to the highest quality.
* Ensure that all work is completed in a timely manner.
* Ensure that all necessary paperwork is completed accurately and in a timely manner.
* Liaise with customers, colleagues, and suppliers.
* Maintain a clean and safe working environment for yourself and colleagues.
* Ensure that all tools and equipment are maintained in a safe and usable condition.
* Adhere to all company policies and procedures.

SMART Repair Technician Skills and Experience:
* Experience of SMART repair technician jobs in the motor industry.
* Experience of working on a variety of vehicle types including welding
* Knowledge of the relevant health and safety regulations.
* Strong communication skills.
* Ability to work both independently and as part of a team.
* Ability to use initiative and solve problems.
* Ability to work to deadlines.
* Full UK driving licence.
Working on our smaller vans right up to our HGVs and mechanical equipment, you'll receive extensive training and full induction to ensure you have the skills to complete the job

Consultant - Yvonne Martin - Octane Recruitment
INDBS
Octane Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries.

We are recruiting across the UK for Panel Beater, Panel Technician, Paint Sprayer, Paint Technician, MET Technician, SMART Repair Technician, Cosmetic Repair Technician, ADR Technician, Bodyshop Estimator, Vehicle Damage Assessor, VDA, Bodyshop Manager, Assistant Bodyshop Manager

Octane Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments.
All applicants for this SMART Repair Technician role are treated with 100% confidentiality

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Trailer Repair Technician
• Working Location: Benoi
• Working Hours: 6 days (Mon-Fri 8.30 am-6.30 pm, Sat 8.30 am-5 pm)
• Salary Package: Salary $1,500 + OT + Meals + Accommodation + Transportation + tea break
• Duration: Permanent Role

Key Responsibilities

• Perform repairs and maintenance tasks on trailers to ensure they are in good working condition.
• Inspect trailers for mechanical issues and fix any problems related to performance, parts, or safety.
• Follow maintenance schedules to keep trailers functioning optimally.
• Report any major issues that need further attention or require additional parts to the supervisor.

APPLY NOW!!!

• Experienced with car repair.
• Experienced with trailers/trucks is an advantage.
• A team player who can collaborate, delegate, and lead technicians to meet daily work goals.
• Positive attitude and willingness to learn.
• Detail-oriented with a strong focus on customer satisfaction.
• Meals provided daily.
• Accommodation provided.
• Free company transport between the dormitory and workshop.
• Daily tea break from 3:00 PM to 3:15 PM.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69944 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781