Total 41 maintenance repair job vacancies in New Ulm, Minnesota

1.Responsible for the coordination and management of the operation and maintenance team, including network/hardware planning management, basic operation and maintenance, database operation and maintenance, application operation and maintenance, operation and maintenance platform, etc.;

2. Establish and improve standardized operation and maintenance systems, processes, management strategies and security strategies to ensure the quality of operation and maintenance;

3. Responsible for the deployment and daily maintenance and management of the company's operation and maintenance systems to ensure the normal operation and emergency response of the operation system;

4. Ensure the safety of operation and maintenance of the department, handle operation and maintenance accidents, optimize various maintenance workflows, and continuously reduce system risks;

5. Responsible for the management of the operation and maintenance team, the improvement of employees' work skills, etc.

Major Duties

• Performs a variety of tasks involved with installing, modifying, troubleshooting and repairing new and existing systems, including, but not limited to: condensers, chillers, air handlers, compressed air, humidifying, dehumidifying, filtering, refrigerators, freezers and computer based Energy Management Control Systems (EMCS).
• Maintains, repairs and installs new and existing plumbing systems, to include, but not limited to: high/ low pressure piping, sanitary sewer, steam heat, steam generation, circulating, vacuum, and condensate pumps, expansion tanks, radiators, lavatories, commodes, and water heaters.
• Works from building plans, blueprints and sketches to plan and layout routing of piping, vents, wiring, refrigeration lines, ductwork and valves.

• Reads and interprets blueprints and wiring diagrams relative to the assigned equipment and utility systems. He/she must be able to read and understand technical manuals and instructions on air conditioning and refrigeration equipment, as well as pumps, valves, gas and oil fired boilers and furnaces.
• Estimates cost, both labor and material, and prepare lists of materials for the completion on any job to be done
• Uses hand and power tools, to include, but not limited to: multi-meters, diagnostic equipment, air velocity meters, flue gas analyzer, grinders, pipe threading machine, pipe cutter, Oxy-Acetylene torch, refrigeration gauges, and motorized drain cleaner.
• Troubleshoots, calibrates, balances and operates central heating, ventilation, air conditioning, and steam systems and their associated equipment and controls within the facility.
• At a minimum, possesses a Universal Technician certification in accordance with 40 CFR part 82, subpart F, as well as a Gas Fitters License.
• Creates leak-free joints in piping and tubing systems by using the appropriate method, to include, but not limited to: solder, silver solder, Teflon sealant, and compression fittings.
• Possesses the knowledge of electrical wiring and related components of pumps, air handlers, chillers, water heaters, exhaust fans, electronic valves, etc. and be able to troubleshoot, repair and/or install such items.

• Confers with the Maintenance Scheduler and/or the M&R Operations Supervisor regarding his findings relative to maintenance and repairs to utility systems and equipment and helps plan and coordinate the repair of any issues.
• Knows codes and regulations pertaining to the practice of HVAC, refrigeration, plumbing and steam. Plumbing includes but is not limited to domestic water, heating/cooling piping, natural gas/propane, compressed air, sanitary drain piping.
• Plans his/her work in compliance with the prescribed standards of quality and quantity in accordance with established policy, codes, and regulations.
• Performs maintenance of all air conditioning and refrigeration equipment, including changing oil, replacing gaskets, replacing defective lines and/or valves including expansion valves, back pressure valves, water control valves, pressure regulators, compressors, receivers, condensers, evaporators, and automatic controls.
• Performs maintenance, repair, and installation on, but not limited to the following dietetic equipment: reach-in and walk-in refrigerators/freezers and all related components, ice making machines, hot-cold food carts, and lowerators.
• Maintains, repairs and modifies compressed air systems (excluding Medical Air) throughout the facility to ensure proper operation, pressure and filtration.
• Performs maintenance and repair, extensions and alterations to all piping, fixtures, appliances and appurtenances in connection with any of the following: sanitary drainage or storm drainage facilities; the venting systems; the water supply system; gas distribution within or adjacent to buildings, structures or conveyance and throughout the grounds of the medical center.
• Installs and maintains all types of equipment such as lavatories, commodes, showers, and dietetic equipment, hot water heaters, boilers, radiators, pressure regulating valves, sprinkler systems, sterilizers, steam traps, back-flow preventers, and all thermostatic equipment.
• Makes preventive maintenance inspections of all steam, water, and gas lines, and on fixtures and appliances, relative to those portions of utility systems.
• Performs the following related tasks in connection with said duties: pipe covering, welding, brazing, sheet metal work and minor electrical work such as controls on pumps and HV AC equipment, chrono-flow and motorized valves, vacuum pumps and pneumatic systems and piping or plumbing related to x-ray and dental equipment.
• Follows all Lock-Out Tag-Out procedures as required by OSHA and VA regulations.

As a SURFACE MAINTENANCE MECHANIC SUPERVISOR, WS-5801-11, you will:

• Plan use of subordinate workers, equipment, facilities, and materials on a week-to-week or month-to-month basis.
• Coordinate work with supporting or related work functions controlled by other supervisors.
• Assigns tasks to be performed based on readiness and explains work requirements, methods, and procedures.
• Ensure equipment repairs do not exceed maintenance expenditure limits in accordance as established by regulation and or policies.
• Perform non-supervisory work, such as, transporting equipment, performing maintenance tasks, etc.
• Develop, publish, and ensure employee compliance with standing operating procedures for the activity supervised.
• Ensure the employees wear appropriate safety equipment and follow pertinent safety precautions.
• Prepare for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises.
• Performs other duties as assigned.

This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The purpose of the position is to serve as an inspector of surface maintenance equipment to ensure that physical and operating characteristics are within acceptable standards and specifications. Duties involve complex inspection work that requires a wide variety of inspection processes and techniques. May assist higher graded inspectors, as required.

• Inspects a large variety of heavy-duty mobile equipment (i.e., combat, tactical, etc.) and automotive vehicles (i.e., attack tanks, large cranes, tank retrievers, fire trucks, bridge transporters, armored vehicle launched bridges, bulldozers, road graders, crawler tractors, power shovels, self propelled earth compacting equipment, self propelled artillery, etc.). May also inspect heavy artillery, small arms, powered support and other equipment or components of equal or lesser complexity. May assist higher-graded inspectors to perform inspections on equipment repairs.
• Inspects complex, interrelated mechanical, hydraulic, pneumatic, electronic and electrical systems, equipment and their components while in operation or in a standby condition. Inspects and performs tests to braking, steering, and differential systems, which are mechanically integrated with the transmission; to large engines, which directly power multiple hydraulic and pneumatic systems; to intricate fuel injection systems; to turret stabilization systems; and to other systems combined in a single, complex mechanical assembly. Uses specially designed testing methods and test equipment such as computerized test sets, precision gauges, electronic sensors, injector test stands, engine scopes, etc., to assure that tolerance and safety factors have been met.
• Inspects equipment to determine repairs needed. Utilizes established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s). Considers a variety of factors such as cost and availability of parts, man-hours, and impact of time constraints on the mission to assess whether repair is economical. Recommends to a higher echelon to condemn equipment when the repair costs exceed the established MEL. Prepares lists of needed repairs, parts, and man-hours authorized. Performs in-process inspections to assure that equipment is being repaired in accordance with pertinent requirements. Performs final inspection, certifying that equipment is in satisfactory operating condition, or rejects the work and returns the equipment to the repair shop with specific reports prescribing additional repairs.
• Serves as inspector on Command Maintenance Evaluation Teams (COMET) and/or as a member of Maintenance Assistance and Instruction Teams (MAIT).
• Performs other duties as assigned.

(1) Performs limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assists higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Performs work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.
(2) Performs limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determines when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.
(3) Removes, replaces, adjusts, cleans and installs parts and components such as wheel seals, switches, sensors, fuel pumps, water pumps, power steering pumps, brakes, filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, battery cables, and other items of similar complexity.
(4) Independently performs routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts. Receives guidance and instruction from a higher graded mechanic or supervisor to perform non-routine and more complex repairs on portions of major assemblies and/or systems. May provide field maintenance at unit locations as part of a "contact team". Recovers and evacuates inoperable vehicles from the unit location of breakdown.
(5) Conducts limited readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs Preventive Maintenance Checks and Services (PMCS) and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc. Performs other preventive maintenance operations as required to ensure that equipment is functioning properly.
(6) May perform routine maintenance and limited repairs on basic communication equipment such as radios, field telephones, amplifiers, switchboards, recorders, intercoms by removing and replacing components and elements. Performs minor body and fender, or other metal repairs, using peening hammers, dollies and limited welding. Performs limited repairs and routine maintenance on small arms and accessory equipment by replacing worn or damaged parts. Makes minor repairs to canvas and leather items using bonding/sealing compounds and hand tools such as awls, canvas needles etc.
(7) In conjunction with or in the absence of the Tools and Parts Attendant, may maintain supply documentation, and the receipt, store, issue, and inventory of tools and parts used in the trades operation.(8) Performs other duties as assigned.

This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The purpose of the position is to serve as an inspector of surface maintenance equipment to ensure that physical and operating characteristics are within acceptable standards and specifications. Duties involve complex inspection work that requires a wide variety of inspection processes and techniques. May assist higher graded inspectors, as required.

• Inspects a large variety of heavy-duty mobile equipment (i.e., combat, tactical, etc.) and automotive vehicles (i.e., attack tanks, large cranes, tank retrievers, fire trucks, bridge transporters, armored vehicle launched bridges, bulldozers, road graders, crawler tractors, power shovels, self propelled earth compacting equipment, self propelled artillery, etc.). May also inspect heavy artillery, small arms, powered support and other equipment or components of equal or lesser complexity. May assist higher-graded inspectors to perform inspections on equipment repairs.
• Inspects complex, interrelated mechanical, hydraulic, pneumatic, electronic and electrical systems, equipment and their components while in operation or in a standby condition. Inspects and performs tests to braking, steering, and differential systems, which are mechanically integrated with the transmission; to large engines, which directly power multiple hydraulic and pneumatic systems; to intricate fuel injection systems; to turret stabilization systems; and to other systems combined in a single, complex mechanical assembly. Uses specially designed testing methods and test equipment such as computerized test sets, precision gauges, electronic sensors, injector test stands, engine scopes, etc., to assure that tolerance and safety factors have been met.
• Inspects equipment to determine repairs needed. Utilizes established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s). Considers a variety of factors such as cost and availability of parts, man-hours, and impact of time constraints on the mission to assess whether repair is economical. Recommends to a higher echelon to condemn equipment when the repair costs exceed the established MEL. Prepares lists of needed repairs, parts, and man-hours authorized. Performs in-process inspections to assure that equipment is being repaired in accordance with pertinent requirements. Performs final inspection, certifying that equipment is in satisfactory operating condition, or rejects the work and returns the equipment to the repair shop with specific reports prescribing additional repairs.
• Serves as inspector on Command Maintenance Evaluation Teams (COMET) and/or as a member of Maintenance Assistance and Instruction Teams (MAIT).
• Performs other duties as assigned.

(1) Performs limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assists higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Performs work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.(2) Performs limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determines when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.(3) Removes, replaces, adjusts, cleans and installs parts and components such as wheel seals, switches, sensors, fuel pumps, water pumps, power steering pumps, brakes, filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, battery cables, and other items of similar complexity.(4) Independently performs routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts. Receives guidance and instruction from a higher graded mechanic or supervisor to perform non-routine and more complex repairs on portions of major assemblies and/or systems. May provide field maintenance at unit locations as part of a "contact team". Recovers and evacuates inoperable vehicles from the unit location of breakdown.(5) Conducts limited readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs Preventive Maintenance Checks and Services (PMCS) and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc. Performs other preventive maintenance operations as required to ensure that equipment is functioning properly.(6) May perform routine maintenance and limited repairs on basic communication equipment such as radios, field telephones, amplifiers, switchboards, recorders, intercoms by removing and replacing components and elements. Performs minor body and fender, or other metal repairs, using peening hammers, dollies and limited welding. Performs limited repairs and routine maintenance on small arms and accessory equipment by replacing worn or damaged parts. Makes minor repairs to canvas and leather items using bonding/sealing compounds and hand tools such as awls, canvas needles etc.(7) In conjunction with or in the absence of the Tools and Parts Attendant, may maintain supply documentation, and the receipt, store, issue, and inventory of tools and parts used in the trades operation.(8) Performs other duties as assigned.