Total 38 maintenance repair job vacancies in dallas texas

MAJOR DUTIES:

This Maintenance Mechanic position is assigned to the Facilities Division of Big Bend National Park and directly reports to the Supervisor for Buildings and Utilities. The incumbent will perform custodial duties daily, and occasionally in multiple location. Must have basic knowledge of cleaning products and supplies and how to safely use them. The incumbent should have basic knowledge of common building materials, paints, and petroleum products.

The incumbent will assist higher graded workers preform repairs and routine maintenance in constructing, altering, modifying, or repairing a wide range of features in buildings interior and exterior including framework, rafters, joists, insulation, sheet rock, doors, windows, and flooring. Should be able to identify common material needed for carpentry and painting work. The incumbent will be required to assist others with installing and repairing any combination of plumbing fixtures, meters, pumps, couplings, unions, and joints needed for proper operation of the plumbing systems. Incumbent may be required to use a variety of hand and power tools and must operate them safely. Carries heavy items to and around work sites. Loads and unloads supplies, material, tools, and equipment. Performs duties with oversight and/or review of work during progress or upon completion.

Operates motor vehicles and performs pre-vehicle operation inspection such as fluid levels, lights, brakes, and operational procedures, greasing moving parts, changing oil, fuel and air filters, cleaning and washing vehicles, and minor parts changing repairs. The incumbent will be exposed to a variety of seasonal weather conditions while working outdoors. Will be exposed to heat, biting insects, dust, dirt, wind, and rain. May work with hazardous chemicals and around moving equipment, paints, solvents, etc.

AREA INFORMATION:

Big Bend National Park encompasses 801,000 acres of the Chihuahuan Desert with more biodiversity than almost any other national park and a dark sky designation. Elevation in the park varies from 7825' to 185'. The climate is generally pleasant with hot summers (90-110+ degrees F.) and mild winters (30-50 degrees F.). Recreational opportunities include hiking, bird watching, photography, backcountry camping, bicycling, and river rafting. The park has a post office, gas stations, camper stores, restaurant, library, gym, and lodge.

The gateway town of Terlingua has lodging, restaurants, hardware store, small grocery and gift stores, churches and a bank. Lajitas has limited shopping, lodging, restaurants, golf course and churches. Alpine, Texas (100 miles from PJ) has most necessities, including supermarkets, variety of stores, a hospital, pharmacies, churches, a movie theater, and a university. The nearest larger cities are Midland/Odessa (225 miles) and El Paso (325 miles).

An active employee/community association sponsors social events throughout the year. Visit our website for more information: https://go.nps.gov/bigbendareainfo.

DAYCARE AND SCHOOL INFORMATION:

The San Vicente Independent School District (SVISD) and SVISD Early Learning Center (ELC), are in Panther Junction and serve those that live in Big Bend National Park. SVISD ELC, is a state-accredited daycare facility for children ages 18 months to 4 years of age. Daycare services are currently free of charge (subject to change). The SVISD elementary school, is a Texas Education Agency, A-Rated, elementary school (K-8). SVISD will include High School as well (9-12) starting in 2024. For more information about the Daycare and Schooling, contact Jessi Milam, Ed.D. Superintendent, Cell: (830) 333-1074 or SVISD School Office: (432) 244-3131. Terlingua (30 miles) has a (K-12) state-accredited school. The High School is rich in academics, extracurricular, and athletic opportunities (9-12). Alpine, TX (100 miles) has a four-year university with in-person and online graduate programs.

• Performs the simpler aµd more routine tasks of the plumbing trade.
• Performs simpler and more routine carpentry duties.
• Performs simpler and more routine duties of the air conditioning equipment trade.
• Provides support for all crafts in the Operations and Maintenance(O&M) section.
• Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.

• Perform repairs to small and/or domestic heating units and systems.
• Provide intermediate carpentry, painting, and/or plumbing allied support.
• Perform flat work welding using oxygen-acetylene and electric arc processes.
• Perform repairs to domestic and commercial refrigeration and air conditioning units.
• Provide service and repairs to domestic and commercial type kitchen and bakery equipment.
• Replace components such as compressors, thermostats, and coils on heating and air units and systems.

Responsible for the maintenance and repair of the institution buildings and structures, through the supervision of inmate workers.

Supervises and trains inmate workers in various phases associated with the construction, repair, maintenance, and renovation of buildings and related structures, grounds, fixtures and utilities, requiring the use of a variety of trade practices such as carpentry, masonry, plumbing, cement work, painting, welding, roofing, and other related trades.

Responsible for design and development of plans, specifications and blueprint drawings.

Responsible for adhering to safety procedures for hazardous material handling, OSHA requirements, and environmental issues.

Responsible for the ordering and purchasing of all material/equipment needed to perform assigned projects.

Along with all other correctional institution employees, incumbent is charged with responsibility for maintaining security of the institution. The staff correctional responsibilities precede all others required by this position and are performed on a regular and recurring basis.

Responsible for the maintenance and repair of the institution buildings and structures, through the supervision of inmate workers.

Supervises and trains inmate workers in various phases associated with the construction, repair, maintenance, and renovation of buildings and related structures, grounds, fixtures and utilities, requiring the use of a variety of trade practices such as carpentry, masonry, plumbing, cement work, painting, welding, roofing, and other related trades.

Responsible for design and development of plans, specifications and blueprint drawings.

Responsible for adhering to safety procedures for hazardous material handling, OSHA requirements, and environmental issues.

Responsible for the ordering and purchasing of all material/equipment needed to perform assigned projects.

Along with all other correctional institution employees, incumbent is charged with responsibility for maintaining security of the institution. The staff correctional responsibilities precede all others required by this position and are performed on a regular and recurring basis.

Responsible for the maintenance and repair of the institution buildings and structures, through the supervision of inmate workers.

Supervises and trains inmate workers in various phases associated with the construction, repair, maintenance, and renovation of buildings and related structures, grounds, fixtures and utilities, requiring the use of a variety of trade practices such as carpentry, masonry, plumbing, cement work, painting, welding, roofing, and other related trades.

Responsible for design and development of plans, specifications and blueprint drawings.

Responsible for adhering to safety procedures for hazardous material handling, OSHA requirements, and environmental issues.

Responsible for the ordering and purchasing of all material/equipment needed to perform assigned projects.

Along with all other correctional institution employees, incumbent is charged with responsibility for maintaining security of the institution. The staff correctional responsibilities precede all others required by this position and are performed on a regular and recurring basis.

Responsible for the maintenance and repair of the institution buildings and structures, through the supervision of inmate workers.

Supervises and trains inmate workers in various phases associated with the construction, repair, maintenance, and renovation of buildings and related structures, grounds, fixtures and utilities, requiring the use of a variety of trade practices such as carpentry, masonry, plumbing, cement work, painting, welding, roofing, and other related trades.

Responsible for design and development of plans, specifications and blueprint drawings.

Responsible for adhering to safety procedures for hazardous material handling, OSHA requirements, and environmental issues.

Responsible for the ordering and purchasing of all material/equipment needed to perform assigned projects.

Along with all other correctional institution employees, incumbent is charged with responsibility for maintaining security of the institution. The staff correctional responsibilities precede all others required by this position and are performed on a regular and recurring basis.

• Conducts classroom, laboratory or field instruction.
• Develops and/or revises training materials.
• Evaluates student progress and performance.
• Counsels students to identify and help resolve problems as required.
• Maintains professional and technical expertise.
• Accomplishes special projects.

• This position will be responsible for the daily golf course management of an 18-hole golf course, driving range and practice area.
• This position will be responsible for directing and supervising all subordinates of maintenance employees.
• The superintendent will be responsible for maintaining regular training and certification of membership and spraying licensing.
• This position will be responsible for preparing a working budget outlining annual maintenance requirement.
• The superintendent will be responsible for development of a preventive maintenance plan of all turf equipment and maintenance vehicles.

• Conducts classroom, laboratory or field instruction
• Develops and/or revises training materials
• Evaluates student progress and performance
• Counsels students to identify and help resolve problems as required
• Maintains professional and technical expertise
• Accomplishes special projects

As a SURFACE MAINTENANCE REPAIRER (Title 32) with the Texas Army National Guard, your duties will include, but will not be limited to:

• Performs limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assists higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Performs work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.
• Performs limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determines when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.
• Removes, replaces, adjusts, cleans and installs parts and components such as wheel seals, switches, sensors, fuel pumps, water pumps, power steering pumps, brakes, filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, battery cables, and other items of similar complexity.
• Independently performs routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts. Receives guidance and instruction from a higher graded mechanic or supervisor to perform non-routine and more complex repairs on portions of major assemblies and/or systems. May provide field maintenance at unit locations as part of a "contact team". Recovers and evacuates inoperable vehicles from the unit location of breakdown.
• Conducts limited readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs Preventive Maintenance Checks and Services (PMCS) and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc. Performs other preventive maintenance operations as required to ensure that equipment is functioning properly.
• May perform routine maintenance and limited repairs on basic communication equipment such as radios, field telephones, amplifiers, switchboards, recorders, intercoms by removing and replacing components and elements. Performs minor body and fender, or other metal repairs, using peening hammers, dollies and limited welding. Performs limited repairs and routine maintenance on small arms and accessory equipment by replacing worn or damaged parts. Makes minor repairs to canvas and leather items using bonding/sealing compounds and hand tools such as awls, canvas needles etc.
• In conjunction with or in the absence of the Tools and Parts Attendant, may maintain supply documentation, and the receipt, store, issue, and inventory of tools and parts used in the trades operation.
• Performs other duties as assigned.

As a DEPUTY SURFACE MAINTENANCE MANAGER (Title 32) with the Texas National Guard, your duties will include, but will not be limited to:

• Manages, directs, coordinates, and oversees the ARNG State Surface Maintenance program. Determines goals and develop plans independently or jointly with higher management. Contributes significantly to the determination of resource needs, allocation of resources, and is accountable for their effective use. Makes or recommends organizational changes that have considerable impact, such as those involving basic structure, operating cost, and key positions. Considers a broad spectrum of factors when making decisions including such matters as employee relations, labor-management relations, and the effect on other organizations. Coordinates program efforts with other organizations or with National Guard Bureau personnel.
• Plans and schedules work and production to be accomplished by subordinates, sets and adjust short-term priorities. Assigns work in consideration of employee skills and mission requirements.
• Manages all aspects of the maintenance program, to include long- and short-range planning, maintenance training and proficiency, human resources direction, budgeting, etc. Formulates directives, serves on policy boards, serves on financial management committees, etc. Ensures compliance with National Maintenance Program (NMP) business procedures when scheduling and executing sustainment maintenance operations.
• Provides technical and administrative advice to the Director of Logistics, commanders, and various staff officers regarding the surface maintenance programs, fiscal matters, organizational planning, and staffing for all levels of maintenance. Represents the state in major command conferences affecting the maintenance program. Serves as a liaison with Army Commands, the NGB, DOL, Army Depots, etc., in all matters pertaining to maintenance activities.
• Plans and establishes maintenance policies, programs, and procedures to assure effective support of DoD (Department of Defense) and training mission requirements. Confers with commanders and staff to establish and implement maintenance policies, programs, and procedures. Establishes goals, objectives, and requirements for surface maintenance related funds.
• Evaluates accomplishment of the surface maintenance program to ensure systems and programs are functioning properly; effective utilization and maintenance of equipment; and that projects are accomplished within established deadlines. Adjusts major scheduling of projects, as necessary, to meet changing requirements. Evaluates and ensures that results of equipment surveys and cost feasibility studies for additions or changes in the surface maintenance program are consistent with the latest technical developments and the needs of the state.
• Directs inspections of operating activities to determine the condition of required facilities, the effectiveness of maintenance activities in support of programs, and to ensure coordination between such activities. Analyzes maintenance activity inspection reports and directs corrective action when necessary.
• Directs and coordinates the correction of maintenance deficiencies affecting unit readiness. Analyzes maintenance production impacting equipment readiness. Responsible for authorizing the level of maintenance to be performed at Table of Distribution and Allowances (TDA) for maintenance activities. Serves as a member of appropriate Authorized Stock List (ASL) review board(s). Directs and controls activities related to materiel readiness, including the Maintenance Assistance and Instruction Team and Command Maintenance Evaluation Team programs, to ensure efficient operation of all facilities and organizations.
• Serves as program manager for surface maintenance funds. Develops the maintenance financial requirement portion of the logistics budget for submission to the Program, Budget and Accounting committee. Ensures funds are obligated in accordance with the state budget plan. Advises and directs others regarding surface maintenance related funds.
• Conducts staff conferences to outline priorities and collaborate on budget impacts caused by increased costs, changes in programs and facilities, mission/weapons system changes, and requirements for new facilities or facility remodeling, etc.
• Exercises significant responsibilities in dealing with, or advising, higher ranked officials of other units or organizations. Assures that manpower requirements are met and coordinates through the DOL to provide manpower requirements justifications and other necessary information. Allocates available manpower resources. Develops, manages, and administers the maintenance ADSW program.
• Performs other duties as assigned.

Job Summary

To support our extraordinary teams who build great products and contribute to our growth, we’re looking to add a/an Automation Maintenance Manager located in Austin, TX.  

Reporting to the Sr. Reliability Engineering Manager the Automation Maintenance Manager Directs activities of personnel engaged in the troubleshooting, repairing and maintenance of manufacturing equipment in order to attain goals consistent with cost, quality, and delivery requirements. 

What a typical day looks like:

• Directs daily department activities in order to maximize equipment utilization and support production needs.
• Establishes preventative maintenance schedules. 
• Forecasts operating costs of department and directs preparation of budget requests.
• Reviews and establishes material, equipment, and manpower resource requirements.
• Coordinates maintenance activities with other functional groups such as engineering and operations.  Selects and develops personnel to ensure the efficient operation of the departmental function. 
• Administer safety programs in order to provide a safe and clean workplace for employees.
• Generates maintenance logs and other operations metrics.

The experience we’re looking to add to our team,

• Typically requires a Bachelor's Degree or equivalent experience.
• Typically requires 10 years of related to Maintenance.
• 5 – 7 experience as a manager.
• FDA Regulatory experience is preferred.
• CMMS system experience.
• Large multi functional management experience.

What you’ll receive for the great work you provide:

• Full range of medical benefits, dental, vision
• Life Insurance
• Matching 401K
• PTO
• Tuition Reimbursement
• Employee discounts at local retailers

EC37

Job Category

Is Sponsorship Available?

$1,000 First-Year Bonus*

Senior Maintenance Technician

Our On-Call Maintenance Associates can benefit from a 40% apartment allowance if living on-site at the property for which they work. 

OUR COMPANY:

At Fairfield, we are proud to be a leader in the multifamily housing industry. We are passionate about creating exceptional and luxurious apartment living. Among the most experienced multifamily companies, Fairfield has developed and acquired over 1000 communities since 1985.  We are an award-winning company that proudly employs over 1,400 associates who are dedicated to serving our customers at our apartment communities located in over 30 markets nationwide.

Being a part of Fairfield means more than a rewarding career with personal growth. It’s a partnership for the long term, working alongside colleagues in an open-dialogue environment that encourages growth and the sharing of ideas. We know that our associates are a key ingredient to our success, and we’re proud to reflect that in our culture.

ABOUT THIS POSITION:

Fairfield properties are known for the visible and available on-site staff that keep our residents loving where they live. Our Senior Maintenance Technicians are critical members of our Property Management Teams who work to ensure the upkeep of our properties and ensuring our customers’ happiness and comfort.

Our Senior Maintenance Technicians take pride in and oversee the overall appearance and maintenance of our residential communities. They work closely with the on-site Maintenance Supervisor and Community Manager to ensure ongoing curb appeal, cleanliness, and function of the individual units and surrounding grounds.

This is a busy, exciting role for someone already skilled at apartment maintenance and who is ready to move to the next step in their career as Senior Maintenance Technician. We are seeking someone committed to the preservation and beautification of real estate who is passionate about staying with the company for a long and rewarding career in residential property management.

WHAT YOU CAN EXPECT TO DO IN THIS ROLE:

PROPERTY MAINTENANCE

• Perform maintenance repairs throughout the property including the common area amenities, occupied units and vacant units.

• Coordinate all move-ins and move-outs with the Community Manager and Maintenance Supervisor.

• Maintain a schedule for timely completion of apartment make-readies, ensuring that all apartments scheduled for move-ins are completely ready for the new resident prior to move-in.

• Diagnose problems and repairs in the areas related to electrical, plumbing, HVAC, pool, carpentry, dry wall, exterior structural and appliances.

OPERATIONS

• Use Yardi (or similar) property management software to manage open service repair requests

• Assist in maintaining an accurate inventory of service items.

• Ensure that policies and procedures as well as safety and compliance expectations are met.

CUSTOMER SERVICE & COMMUNICATION

• Deliver outstanding customer service to all residents.

• Communicate and effectively work together with your fellow team members. 

COMPLIANCE & SAFETY

• Assist with a monthly safety meeting, assign duties as needed.

• Supervise all work by outside contractors in the absence of the Maintenance Supervisor.

• Ensure that policies and procedures as well as safety and compliance expectations are met.

• Strictly adhere to ethical standards including, but not limited to, the ability to maintain confidentiality and maintain fiduciary responsibility.

 WHAT YOU’LL NEED ON DAY ONE:

• Minimum two years of previous experience in property management maintenance, other building maintenance, or related trade is required.

• HVAC-EPA (Type II) or EPA Universal certification is required.

• Certified Pool Operator (CPO) certification strongly preferred.  Associates hired without a CPO certification will be required to obtain within 90 days of hire.

• High school diploma or equivalent required.

• A valid driver’s license and reliable transportation is required. 

• Technical knowledge in the following areas: electrical, plumbing, HVAC, swimming pool, carpentry, dry wall, exterior structural, and appliance repair is required.

• Ability to read, write, understand, and communicate in English.

• Experience using Yardi or other related property management accounting software preferred.

• Experience using Microsoft Outlook, Word, and Excel preferred.

• General computer skills including operating a mobile device.

• Superior customer service skills including the ability to manage difficult customers and/or situations. 

• Strong attention to detail, organizational, time-management and problem-solving skills.

• Ability to maintain a flexible, available schedule to respond promptly and resolve after-hours and weekend emergency maintenance.

• Ability to work a flexible schedule to include weekends, evenings, and holidays. 

*The First-Year Bonus, less usual deductions, will be divided into two equal payments: the first payment following the completion of 90 days of employment, and the second payment following the completion of 1 year of employment.

#LI-JULIA

Estimated Rate of Pay:

$19.00 - $23.00

This position is non-exempt; the range above reflects hourly rates.

The pay range displayed for this position is determined by skills and experience required, location and job complexity*. Potential job offers may vary based on the skills, education, and experience an individual candidate holds. This range reflects base rate only, and does not include allowances, perks, commissions or bonuses applicable to this position (if any). In addition to base salary, Fairfield offers all full time associates the following, upon meeting eligibility requirements: 

• Paid time off, paid holidays and sick days, paid time off for volunteering activities (optional) 
• Matched 401(k) 
• Medical, dental & vision insurance 
• Flexible spending account 
• Life insurance 

* Pay range is a calculation based on a midpoint price. Fairfield complies with all wage and hour laws, including minimum wage and salary exempt requirements.  

Job Title

Job Description Summary

Job Description

ESSENTIAL JOB DUTIES:

• Prepares all market-ready apartments, which may include painting, carpet cleaning/repair, general repairs, and housekeeping to ensure a quality product to our residents.
• Completes resident service request in a timely manner.
• Has knowledge of various maintenance functions including and not limited to plumbing, pool maintenance, air conditioning, heating, general carpentry skills, appliance, electrical, painting, caulking, snow removal, scheduling, and life safety issues.
• Maintains grounds, pools/ hot tubs, common areas, and dog parks to keep them clean, free of trash, debris, and other safety issues.
• Performs on-call emergency procedures as required.
• Reports any maintenance issues that affect the budget such as life safety, vacant repairs, property damages, and common area needs to the manager.
• Schedules and performs preventative maintenance and records such activities.
• Is knowledgeable of state, local, and federal housing laws, codes, policies, and systems regarding maintenance.
• Attends and participates in training programs as required by Cushman & Wakefield and local city and state jurisdictions.
• Provide superior customer service and represents the company in a professional manner at all times.

COMPETENCIES:

• Must be able to work any shift Sunday-Saturday to support the company's business needs.
• Knowledge of safe use of cleaning agents and equipment used to perform job duties
• Ability to add, subtract, multiply, and divide in all units of measure, whole numbers, common fractions, and decimals.
• Ability to compute rate, ratio, and percent and to prepare and interpret bar graphs.
• Must possess a valid Driver's License.
• CPO if required by city or state.
• EPA 608 - Minimum of Type II
• Follow all Cushman & Wakefield safety policies and procedures

IMPORTANT EDUCATION

• High School Diploma, GED, Trade, Technical, or Vocational school

IMPORTANT EXPERIENCE

• 3+ years of related experience
• EPA 608 – Minimum Type II, or CPO, or local city required certificate

WORK ENVIRONMENT

This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee may need to travel from floor to floor, climb stairs, and may be required to travel outside between buildings in varying outdoor weather conditions. The employee may also be regularly required to remain in a stationary position (sit or stand) for 85% of the time; regularly operate office machinery. The employee must be able to travel up to 10 % of the time. Travel may vary in frequency and duration. The employee must demonstrate the ability to exert up to 100 pounds occasionally, and/or up to 100 pounds frequently, and/or up to 100 pounds of force constantly to lift, carry, push, pull, or move objects.

OTHER DUTIES

This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.