Total 24 maintenance repair job vacancies in tyndall afb florida

The duties of this position include but not limited to:

• Starts, stops, and regulates the utilities and their system components.
• Ensures that steam pressure is maintained at all times.
• Responsible for changing charts, receiving fuel oil shipments, monitoring the central liquid oxygen levels, and preparing orders for materials and/or services.
• Provides preventative maintenance according to predetermined routine guidelines on various mechanical equipment and systems.
• Makes decisions based on data trends to determine the need for adjustment and/or repair.
• Follows instructions and operating procedures and conveys ideas both orally and in writing.
• Troubleshoots, maintains, and repairs system components.
• Resolves emergency heating, ventilation, and air conditioning calls.

• You will operate electrical test equipment (e.g., voltage detectors, multimeters) to determine the presence of electrical energy.
• You will conduct visual inspections and operational tests to determine the need for maintenance or repair work.
• You will lay out job systems and components from blueprints and sketches in compliance with federal, state, and local codes.
• You will follow instructions specified in work orders to perform maintenance and repair work.

• Performs the simpler aµd more routine tasks of the plumbing trade.
• Performs simpler and more routine carpentry duties.
• Performs simpler and more routine duties of the air conditioning equipment trade.
• Provides support for all crafts in the Operations and Maintenance(O&M) section.
• Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.

• Participates in negotiating the Depot Maintenance Service (DMS) Depot Maintenance Activity Group (DMAG) work requirements for the fiscal, budget and out years, in addition to determining man-hour and funding requirements to workload the Center to capacity.
• Assists customers and the Division in developing DMS, DMAG requirements.
• Prepares projected financing, conception to completion.
• Evaluate production to ensure quality of product and actions taken on problems.
• Represents and communicates capabilities to customers in order to generate additional workload.

1. Performs visual inspections of the exterior and interior of all lodging facilities. Informs supervisor of major and minor discrepancies found.
2. Performs minor construction and repair on existing structures involving standard measurements, specifications, instructions, and basic shop mathematics. Installs exterior and interior trim using preplanned materials, such as baseboards, and molding. Replaces broken or missing acoustical ceiling tile, broken door and window trim, window screens, stairway steps, wooden porches, door jambs, and other damaged wood components.
3. Prepares wood and metal surfaces to be painted, mixes and prepares coating material, and applies coating materials (for example, paints, varnishes, and shellacs). Prepares surfaces by scraping, wire brushing, masking, spackling, and sand surfacing.
4. Makes minor electrical repairs by replacing fixtures, switches, sockets, stove burners, electrical cords, bulbs, and fluorescent fixtures.
5. Performs routine/seasonal maintenance and upkeep of gasoline powered lawn equipment to ensure equipment is in good mechanical and safe operating conditions. Identifies if routine maintenance is required to supervisor during initial inspection.
6. Drives vehicles weighing up to 10,000 pounds to various locations both on and off base. Performs routine safety inspections on vehicles, and corrects minor defects.
7. Uses and maintains tools and equipment. Utilizes hand and power tools such as, drills, power saws, routers, standard hand tools, straight edge, chalk line, tapes, rules, caulking irons, pipe wrenches, roller, putty knives, and paintbrushes.
8. Moves and arranges furniture as directed; performs snow removal operations; cleans carpets; and assists in linen duties as directed. Repairs or replaces key and keyless locking mechanisms.
9. Performs other related duties as assigned.

If interested in applying for this position you may preview the online application: https://apply.usastaffing.gov/ViewQuestionnaire/12511127

Interprets construction and project renovation blueprints, prepares layouts and sketches, prepares purchase requests for tools, material and equipment needed. Work must be accurate and to specifications according to job requirements.

Performs work in at least two of the following trades in the maintenance and repair of grounds, exterior structures, buildings and related fixtures and utilities from initial layout completion:

Plumbing: Installs, modifies and repairs new and existing utility, supply and disposal system and equipment such as sewage, water, oil and gas distribution system, water closets, tubs, fire, sprinkler systems and showers. Works from building plans, blueprints and sketches.

Carpentry: Uses skilled techniques to construct, install, repair and modify wood and wood substitute structures and items requiring close tolerance fit and structural soundness. Assembles items using a variety of joining techniques and is skilled in the operation of general and precision carpentry and wood working equipment and is able to produce finished products with precise fits, accurate dimensions and acceptable appearance.

Painting: Performs special coating methods such as marbling and graining using coating materials prepared in special as well as common ways and by applying coating techniques that ensure surfaces have a smooth-textured and decorative appearance and meet thickness and level requirements.

Electrical: Installs, modifies, repairs, maintains, and troubleshoots, tests and loads new and existing electrical lines, circuits, system, associated fixtures, controls and equipment at a skilled journeyman level. Works from building plans, blueprints, wiring diagrams, engineering drawing, and electrical maintenance and repair manuals to plan and lay out the routing, replacement, type, size, gauge, balance, load continuity and safe operation of electrical lines and lighting, circuits, systems, equipment and controls. Determines and places distribution panels, junction boxes, fittings and connections and installs wiring, couplings, conduits, relays, fixtures, transformers and other electrical devices. Plans and lays out work, tracing hard-to-locate defects or problems and completing repairs and installations with little or no technical advice using a wide variety of test equipment such as voltmeter, ammeter, wattmeter, and ohmmeter.

Masonry: Plans and lays out work to be done for repair, alteration or construction of exterior and interior surfaces and structures built of brick, block, glass block, terra cotta, stone and various artificial and natural stone. Cuts and shapes materials used for constructing and repairing window and door openings and corners. Ensures courses are laid evenly and that completed work blends with existing brickwork. Observes required safety, sanitation and hazardous waste disposal rules and regulations. Operates vehicle to transport tools and material to work site.

Performs other related duties as assigned.

• Plans and lays out work from blueprints, sketches, drawings, specifications, guides, codes, and work orders.
• Troubleshoots HV AC/R systems with complex problems and extensive repairs requiring judgment to locate
  malfunctions.
• Installs, repairs, and maintains large commercial and industrial ventilation, refrigeration, air conditioning
  (AC), and cooling systems with complex problems and extensive repairs.
• Installs, modifies, overhauls, repairs, and maintains a variety of complex beating boilers and/or heating.
  systems, single and multiple fuel power boilers, and associated auxiliary and pollution control equipment.
• Performs essential electrical work incidental to the maintenance and operation of HV AC/R systems.
• Performs preventive maintenance on HV AC/R systems and equipment..

• Assists with the planning and performs maintenance in all Lodging facilities. Uses equipment such as Freon recovery units, manifold gauge sets, vacuum pumps, stationary power tools, table saws, drill presses, jointers, plumb lines, spirit level, marking gauges, framing squares, routers, as well as common hand and power tools.
• Installs and/or repairs air-conditioning units, thermostats, ice machines, window units, central air-conditioners, troubleshoots, evacuates systems, repairs leaks, charges systems, cleans coils, by the accepted methods and techniques of the trade while observing environmental protection agency rules. Repairs, trouble shoots, recovers Freon, evacuates, cleans and charges, air-condition units as needed. Performs preventative maintenance, plans and completes work from initial layout to final assembly by interpreting and applying specifications, blueprints, sketches, and other guides and codes. Ensures environmental protection agency rules are followed, determines the methods, techniques, materials, devices, and sequences best suited to do the work. Completes work by any of the accepted methods and techniques of the trade.
• Constructs, alters, repairs wooden and wood substitute items and structures such as framework, interior and exterior trim, staircases, and a variety of furniture. Installs and/or repairs various flooring materials to include carpeting, vinyl tile, sheet tile, ceramic and quarry tile. Installs and/or repairs windows, doors, hinges, locksets, panic hardware, door closers, suspended ceilings, and a variety of furniture. Installs and/or repairs various plumbing fixtures such as sinks, water faucets, toilets, urinals, and their control mechanisms such as flush valves, diaphragms, shut-off valves, shower controls1 replaces p-traps and garbage disposals. Installs and/or repairs various minor electrical components such as light fixtures, receptacles, switches, TV cable outlets, vacuums, and shampooing equipment. Applies paint using brush or roller, tapes and spackles dry wall, using pre-mix filler as required.
• Operates a variety of gasoline, diesel or electric powered-wheeled vehicles, such as platform trucks, van trucks, and stake trucks.
• Performs laborer duties when there are no maintenance or gardener duties to perform due to inclement weather, shortage or unavailability of supplies, etc., or as required assisting with other projects.
• Performs other related duties as assigned.

Including but not limited to:

• GROUND MAINTENANCE: Ensures all lodging areas are free of trash, cigarette butts and other debris
• Mows grass, edges/trims walkways, trims and shapes shrubbery.
• Clears debris from rooftops and cleans gutters.
• Using sprinkler system
• Able to operate equipment such as rakes, shovels, clippers, hedgers, mowers, weed eaters, pressure washers, etc.
• PAINTING: Prepares surfaces and applies paint, stain, or protective finishes to equipment, fixtures, furnishings, and various other types of surfaces within lodging facilities, using standard application methods.
• PLUMBING: Unclogs sinks, commodes, and urinals
• MAINTENANCE/REPAIRS/INSTALLATION: Performs preventative maintenance, scheduled or otherwise
• Replaces light blubs and HVAC filters.
• CAPENTRY: Construct, alter and repair wooden substitute items and make modifications and improvements to indoor and outdoor facilities.
• Mounts fire extinguisher brackets on walls.

• Performs a variety of maintenance, custodial, and repair jobs to include electronic door entry system assets, simple carpentry, plumbing, painting, maintenance repair of the lodging operation.
• Replaces light bulbs, light fixtures, electric outlets, light switches & ceiling fan light kits, etc.
• Changes AC air filters as needed. Inspects and performs minor repairs on lodging equipment, that will include Plumbing duties, i.e., unclog drains, toilets, showers, replace rusted above ground pipes, and fixtures.
• Informs supervisor of major problems.
• Paints indoor and outdoor surfaces and structures; i.e. walls, floors, doors, and door frames.
• Performs various types of uncomplicated wood work, furniture repairs drapery and blind installation and removal.
• Replaces broken and torn screens, performs repairs on windows and frames as required.
• Repairs and performs maintenance on small equipment and appliances to include hand tools, vacuums, irons, carpet shampooers, weedeaters, small lawn mowers, etc.
• Uses manual and gas/electrical tools; i.e. hedgers, clippers, and blowers.
• Accomplishes landscaping/ground keeping tasks to ensure trees, shrubs, plants are waters, pruned, trimmed and applying ice control material to entrance of buildings, shoveling/plowing snow, picking up litter throughout season.
• Ensures grounds remain attractive and professional throughout the season. Investigates any reported maintenance issues to ascertain cause and take corrective action.
• Works independently, plans work day accordingly with little or no supervision.
• Completes and maintains applicable work logs.
• Operates vehicles weighting up to 10,000 pounds, completes Air Force Form 1800 and maintain vehicles in accordance with established guidelines. Manages scheduled vehicle preventative maintenance service program for all lodging vehicles.
• Uses and maintains tools and equipment, maintains bench stock levels of parts, materials, tools, etc. at prescribed levels.
• Utilizes hand and power tools such as drills, power saws, routers, and standard hand tools.
• Performs all monthly facility safety self-inspections requirements; i.e. fire extinguishers, smoke detectors, and exit signs.
• Counts and sorts dirty linens for contractor pickup, counts and distributes clean linens and acts as the Quality Assurance Evaluator for the Linen Contractor.
• Conducts monthly inventory of all linen.
• Provides replacement linen counts to management for ordering to maintain a minimum 4 par stock level on all linen.
• Maintains and files all linen inventory counts (monthly) and contractors' invoices for a 2 year period.
• Others duties as assigned.

The primary purpose of this position is to serve as the Senior Air Reserve Technician (ART) Officer with overall supervision and management of either an Aircraft Maintenance Squadron , a Maintenance Squadron , an Equipment Maintenance Squadron or a Component Maintenance Squadron at an Air Force Reserve Command (AFRC) unit-equipped or associate unit.

RESPONSIBILITES:
1. Plans, organizes, and oversees the activities of the squadron. Manages assigned maintenance resources and ensures production meets operational requirements and technical standards. Recommends procedural and technical improvements and modifications.
2. Exercises supervisory personnel management responsibilities to include personnel and position management, equal opportunity, security, and safety. Advises employees regarding policies, procedures and directives of management. Maintains sound positions management practice when determining types and numbers of positions to support the organizational mission.
3. Represents organization with a variety of installation and functional area organizations. Establishes, develops, and maintains effective working relationships with internal and external customers. Meets with key customers and coordinating officials to assess customer satisfaction, explain organization policy and procedures, and resolves significant problems that arise.

• Conducts classroom, laboratory or field instruction.
• Develops and/or revises training materials.
• Evaluates student progress and performance.
• Counsels students to identify and help resolve problems as required.
• Maintains professional and technical expertise.
• Accomplishes special projects.

Responsibilities include, but are not limited to:

• Performs a variety of tasks in the day to day upkeep and maintenance of Lodging facilities, related structures, fixtures and utilities. Performs visual examination to determine the need for repair work.
• Performs simple carpentry tasks such as repairing items, and a variety of furniture. Must be able to use a variety of hand and powered tools. Unclogs sinks and commodes and must be able to use simple plumbing tools.
• Prepares surfaces to be painted and applies paint, varnishes, stains, etc.
• Replaces a variety of light bulbs and filters, cleans both interior and exterior, using step ladders, may shampoo carpets.
• Pick up and delivers linens, trash and supplies using NAF owned government vehicle.
• Maintains exteriors by picking up trash, and snow removal.
• Operates and maintains motor vehicles ranging from a van to a one ton diesel delivery truck, and assists with heavy moving of items.

• Conducts classroom, laboratory or field instruction
• Develops and/or revises training materials
• Evaluates student progress and performance
• Counsels students to identify and help resolve problems as required
• Maintains professional and technical expertise
• Accomplishes special projects

Requires a general knowledge of carpentry, minor electrical work, plumbing, painting, and related trades. Repair surfaces by such methods as sanding, scraping, or wire brushing for applications of coating materials such as painting, staining, varnishing, or shellacking on furniture, dry walls, ceilings, trims, etc. cutting and installing carpet. Repairs and performs preventative maintenance on small equipment and appliances to include hand tools, vacuums, irons, installs hardware to repair preventative maintenance on small equipment and appliances to include hand tools, vacuums, irons, installs hardware to repair or replace washers and tightening of screws on fittings or faucets. Performs plumbing function such as clearing stopped or sluggish drains, replace washers and tighten screws on fittings or faucets. Remove and replace minor electrical items such as wall switch covers, etc. Notify management of any work orders needed to be submitted to Civil Engineering. Load, unload, or relocate heavy and or bulky items from trucks conveyances, carry and assemble or reassemble items. Use heavy power equipment, mowers, etc. Adjust, clean, oil, and perform maintenance. Cut and trim trees and scrubs.

Operates a variety of vehicles including trucks, sedans, and crew cab pickup trucks that weigh up to 10,000 lbs. Operates snow blowers for snow removal around the facility and designated areas. Completes records and accident reports. Identifies to supply personnel large costs/quantity items needed to perform work.

Performs other related duties as assigned.

If interested in applying for this position you may preview the online application: https://apply.usastaffing.gov/ViewQuestionnaire/12598590