Total 30 manufacturing production job vacancies in hemel hempstead hertfordshire hp2 4yl

Rate: £40 per hour (PAYE) or £53 per hour (Umbrella)
IR35: This role will fall within IR35 guidelines so we cannot use Limited Companies
Duration: 12 months
Location: Royston
Key Skills: Manufacturing, Production, Lean, NPI, Mechanical, Electrical, Electronics

A leading high-technology manufacturer of special purpose machinery, near Cambridge, are seeking a Manufacturing Engineer to be based in their state of the art facility.

We are seeking applications from accomplished Manufacturing Engineers who have experience in complex mechanical systems, electronics and software assemblies, along with an understanding of documentation and work processes

Manufacturing Engineer Requirements:

• A strong background in Electro-Mechanical Engineering, along with a relevant qualification
• Experience of NPI processes is an essential requirement
• Substantiated knowledge in Lean Manufacturing
• Awareness of Design for Manufacture (DFM)
• Experience of Jigs & Fixtures manufacturing
• Comprehensive knowledge of the engineering process from design to production

Manufacturing Engineer Responsibilities:

• Assist Designers and Engineers in product development projects using Design for Manufacture knowledge.
• Develop design, engineering and manufacturing processes that can be documented and repeated.
• Provide leadership and direction to help rectify any manufacturing matters and perform solutions including process change.
• Enhance and sustain documentation and amplify production with best practice procedures.
• Will need to be able to commit to travel 5-6 weeks across the 12 months to other sites.

If you meet the requirements for this Manufacturing Engineer role and would like to find out more, please click Apply now!

Production Manager

The Client
Our Client is a well established company within the water treatment industry. For four decades they have forged a well deserved reputation at the forefront of this industry in the UK. In addition to distributing standard products their ability to build bespoke water treatment solutions to a customers specification has helped set them apart from the competition.

The ROLE
Due to continued success they now require a Production Manager to oversee the production process. The successful candidate will be required to:

* Lead a small team of multi-disciplined (mechanical and electrical) assemblers
* Plan production schedule
* Order the products to ensure stock levels remain adequate
* Quality standards
* Monitor the production processes and adjust schedules as needed
* Monitor productivity rates and product standards
* Liaise with different departments, teams and companies, e.g. suppliers, managers, clients
* Ensure customer orders are completed on time and to budget

The CANDIDATE
Our client is looking for strong applicants with experience in a similar role, the right candidate will:
* Posses a background in assembly/production
* Production planning/scheduling experience
* Multiskilled
* Supervisory/Management experience

Location: Based in Hitchin
Suitable living locations for this role would include;
Hitchin
Letchworth
Stevenage
Barton-le-Clay
Henlow
Royston
Luton
Dunstable
Shefford
Stotfold

Alternative Titles - Production Manager, Assembly Manager, Production Supervisor, Mechanical Assembly Supervisor, Production Planner, Production Scheduler

Mana Resourcing is a specialist recruitment company working within the Engineering, Sales, IT and Commercial sectors. We are established to service and support the recruitment requirements of modern businesses and candidates alike.
INAND1

Production Manager

The Client
Our Client is a well established company within the water treatment industry. For four decades they have forged a well deserved reputation at the forefront of this industry in the UK. In addition to distributing standard products their ability to build bespoke water treatment solutions to a customers specification has helped set them apart from the competition.

The ROLE
Due to continued success they now require a Production Manager to oversee the production process. The successful candidate will be required to:

* Lead a small team of multi-disciplined (mechanical and electrical) assemblers
* Plan production schedule
* Order the products to ensure stock levels remain adequate
* Quality standards
* Monitor the production processes and adjust schedules as needed
* Monitor productivity rates and product standards
* Liaise with different departments, teams and companies, e.g. suppliers, managers, clients
* Ensure customer orders are completed on time and to budget

The CANDIDATE
Our client is looking for strong applicants with experience in a similar role, the right candidate will:
* Posses a background in assembly/production
* Production planning/scheduling experience
* Multiskilled
* Supervisory/Management experience

Location: Based in Hitchin
Suitable living locations for this role would include;
Hitchin
Letchworth
Stevenage
Barton-le-Clay
Henlow
Royston
Luton
Dunstable
Shefford
Stotfold

Alternative Titles - Production Manager, Assembly Manager, Production Supervisor, Mechanical Assembly Supervisor, Production Planner, Production Scheduler

Mana Resourcing is a specialist recruitment company working within the Engineering, Sales, IT and Commercial sectors. We are established to service and support the recruitment requirements of modern businesses and candidates alike.
INAND1

Production Manager

The Client
Our Client is a well established company within the water treatment industry. For four decades they have forged a well deserved reputation at the forefront of this industry in the UK. In addition to distributing standard products their ability to build bespoke water treatment solutions to a customers specification has helped set them apart from the competition.

The ROLE
Due to continued success they now require a Production Manager to oversee the production process. The successful candidate will be required to:

* Lead a small team of multi-disciplined (mechanical and electrical) assemblers
* Plan production schedule
* Order the products to ensure stock levels remain adequate
* Quality standards
* Monitor the production processes and adjust schedules as needed
* Monitor productivity rates and product standards
* Liaise with different departments, teams and companies, e.g. suppliers, managers, clients
* Ensure customer orders are completed on time and to budget

The CANDIDATE
Our client is looking for strong applicants with experience in a similar role, the right candidate will:
* Posses a background in assembly/production
* Production planning/scheduling experience
* Multiskilled
* Supervisory/Management experience

Location: Based in Hitchin
Suitable living locations for this role would include;
Hitchin
Letchworth
Stevenage
Barton-le-Clay
Henlow
Royston
Luton
Dunstable
Shefford
Stotfold

Alternative Titles - Production Manager, Assembly Manager, Production Supervisor, Mechanical Assembly Supervisor, Production Planner, Production Scheduler

Mana Resourcing is a specialist recruitment company working within the Engineering, Sales, IT and Commercial sectors. We are established to service and support the recruitment requirements of modern businesses and candidates alike.
INAND1

Production Manager

The Client
Our Client is a well established company within the water treatment industry. For four decades they have forged a well deserved reputation at the forefront of this industry in the UK. In addition to distributing standard products their ability to build bespoke water treatment solutions to a customers specification has helped set them apart from the competition.

The ROLE
Due to continued success they now require a Production Manager to oversee the production process. The successful candidate will be required to:

* Lead a small team of multi-disciplined (mechanical and electrical) assemblers
* Plan production schedule
* Order the products to ensure stock levels remain adequate
* Quality standards
* Monitor the production processes and adjust schedules as needed
* Monitor productivity rates and product standards
* Liaise with different departments, teams and companies, e.g. suppliers, managers, clients
* Ensure customer orders are completed on time and to budget

The CANDIDATE
Our client is looking for strong applicants with experience in a similar role, the right candidate will:
* Posses a background in assembly/production
* Production planning/scheduling experience
* Multiskilled
* Supervisory/Management experience

Location: Based in Hitchin
Suitable living locations for this role would include;
Hitchin
Letchworth
Stevenage
Barton-le-Clay
Henlow
Royston
Luton
Dunstable
Shefford
Stotfold

Alternative Titles - Production Manager, Assembly Manager, Production Supervisor, Mechanical Assembly Supervisor, Production Planner, Production Scheduler

Mana Resourcing is a specialist recruitment company working within the Engineering, Sales, IT and Commercial sectors. We are established to service and support the recruitment requirements of modern businesses and candidates alike.
INAND1

Production Manager

The Client
Our Client is a well established company within the water treatment industry. For four decades they have forged a well deserved reputation at the forefront of this industry in the UK. In addition to distributing standard products their ability to build bespoke water treatment solutions to a customers specification has helped set them apart from the competition.

The ROLE
Due to continued success they now require a Production Manager to oversee the production process. The successful candidate will be required to:

* Lead a small team of multi-disciplined (mechanical and electrical) assemblers
* Plan production schedule
* Order the products to ensure stock levels remain adequate
* Quality standards
* Monitor the production processes and adjust schedules as needed
* Monitor productivity rates and product standards
* Liaise with different departments, teams and companies, e.g. suppliers, managers, clients
* Ensure customer orders are completed on time and to budget

The CANDIDATE
Our client is looking for strong applicants with experience in a similar role, the right candidate will:
* Posses a background in assembly/production
* Production planning/scheduling experience
* Multiskilled
* Supervisory/Management experience

Location: Based in Hitchin
Suitable living locations for this role would include;
Hitchin
Letchworth
Stevenage
Barton-le-Clay
Henlow
Royston
Luton
Dunstable
Shefford
Stotfold

Alternative Titles - Production Manager, Assembly Manager, Production Supervisor, Mechanical Assembly Supervisor, Production Planner, Production Scheduler

Mana Resourcing is a specialist recruitment company working within the Engineering, Sales, IT and Commercial sectors. We are established to service and support the recruitment requirements of modern businesses and candidates alike.
INAND1

Do you have experience working within a highly sterile environment?

Our client, a pharmaceutical company based in Borehamwood are looking for several Production Technicians to join their team.

As the Production Technician you will be able to demonstrate a good knowledge of aseptic techniques and behaviours along with having a clear understanding of the principles of basic microbiology and sterile assurance.

You will ensure that equipment used is in compliance with any maintenance, calibration and validation requirements and will ensure documentation is completed accurately and on time.

If you have the above experience or know someone that does, please get in touch today!

Post Title: Lecturer in Operations and Manufacturing Management
SBU/Department: School of Physics, Engineering and Computer Science/Department of Engineering

FTE: 1.0 fte (working 37 hours per week)
Duration of Contract: Permanent
Salary: UH7 Lecturer £37,099pa to £44,263pa depending on skills and experience
Annual Leave: 35 days plus standard public holidays and an additional 4 days including the closure of our office between Christmas and New Year
Location: College Lane Campus, Hatfield

The School of Physics, Engineering and Computer Science - Department of Engineering is seeking to appoint a Lecturer in Operations and Manufacturing Management, to support our undergraduate and postgraduate programmes across all Engineering subject areas in the Department.

Main duties and responsibilities
You will undertake teaching and assessment in engineering and technology modules, at undergraduate and postgraduate levels, across all Engineering programmes. You will also support learning through design and development of course materials including online content and undertaking necessary tutorial, laboratory and administrative activities.
You will be expected to contribute actively to research interests of the school and develop short courses, commercial and KTP related activities in the school. You will supervise postgraduate research projects and apply for external funding to support research and commercial activities.
Skill and experience required
You must have experience of working in the subject area within Higher Education or in a relevant sector. In addition to this, you will need proven experience of teaching and tutoring at undergraduate and/or postgraduate level. You will have demonstrable proven experience in industrial, academic or research in at least two of the below areas:
• Manufacturing Engineering (also known as Production or Industrial Engineering)
• Project Management
• Lean manufacturing systems
• Quality Management and Quality Assurance Systems in Manufacturing
• Logistics and Warehousing
• Sustainability in Engineering Operations and Manufacturing
• Operations Management and Operations Research
You will have a breadth and dept of specialist knowledge in the subject discipline that has been developed from previous higher education or industrial sector experience, this expertise will support you to successfully deliver teaching and develop new programmes. You will be willing to contribute to the wider development of subjects, for example, teaching in a secondary subject area, organising and supporting activities like laboratory development, and student recruitment including open days and outreach events. You must have a strong commitment to teaching, learning and student support at university level and a potential willingness to attract external funding. You will have demonstrable proficiency in English Language, with excellent oral, written and presentation skills that will support teaching at undergrad and postgrad level. You must have a strong commitment to motivating and engaging our students in the subject area and facilitating their learning via a range of delivery techniques. You will be effective within a team setting and will make a positive contribution to team functions whilst building good working relationships. As well as your demonstrable ability to work well within a team you must also be able to work on your own initiative. We will also expect from you a willingness to develop module and programme level material whilst also demonstrating a commitment to continuous improvement and to undertake professional qualifications where appropriate.
Qualifications required

Educated with a degree (or equivalent) in a relevant Engineering or related subject area.

A PhD (or equivalent qualification), or close to completion of PhD (no more than 3 months prior to viva) in a relevant Engineering or related subject area is highly desirable for Lecturer.

Please view the job description and person specification for a full list of the duties and essential criteria. Please attach a personal statement showing clearly how your skills and experience match the Person Specification.

An appointment to this role may require an Academic Technology Approval Scheme (ATAS) certificate.

This post cannot be visa sponsored unless the applicant has a PhD / Doctorate.
Contact Details/Informal Enquiries: Head of Engineering Management Subject Group: Thomas Baker (t.baker5@herts.ac.uk) or Deputy Head of Department of Engineering: Dr Christabel Tan (c.k.l.tan@herts.ac.uk).
Closing Date: 17 September 2024
Interview Date: TBC
Reference Number: 059999
Date advert placed: 20 August 2024

Our vision is to transform lives and UH is committed to Equality, Diversity and Inclusion and building a diverse community. We welcome applications from suitably qualified and eligible candidates regardless of their protected characteristics, and recognise there are different ways applicants may achieve the criteria in this document. We offer a range of employee benefits including generous annual leave, flexible location opportunities within the UK, discounted Sports Village memberships and free Active Staff sessions, personal and professional development and family-friendly policies. #GoHerts

Apply online at: https://www.jobs.herts.ac.uk/go/059999

Proud member of the Disability Confident employer scheme

Guidant Global has partnered with a highly reputable Ministry of Defence organisation in the UK, and our client is seeking a proficient Development and Production Test Engineer with expertise in Electronic/Electrical engineering. The role will entail technical support to the manufacturing test of weapons sub-systems in production and development tests and diagnostics of complex weapons at system and subsystem levels.

What we're looking for:

• The ideal candidate should possess an HNC/HND (Electronics) Level of Qualification or an equivalent degree and substantial experience in digital and analogue electronics manufacturing and testing.
• Measurement and testing principles, along with the use of necessary equipment, is an asset.
• Knowledge of the customary CADMID product lifecycle pertaining to test equipment is deemed advantageous.
• RF and microwave technology would be highly beneficial, particularly at the subsystem level.
• Environmental testing, which includes ESS (Environmental Stress Screening), would be considered beneficial for this role.
• Electronic Component level fault finding
• High Voltage training/awareness
• SAP and MS Office Skills
• Manual handling and ESD training.
• Medical requirements
• None Health surveillance requirements

What you'll get to do as a Development and Production Test Engineer - Electronic/Electrical:

• Provide Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations.
• Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions.
• Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level.
• Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme.
• Evaluation of technical problems to develop proposals for test equipment investigations and corrective actions, including process improvements.
• Test Engineering representative at Defect Review Board meetings to ensure efficient progress of equipment and quality notifications towards corrective action.

Security Clearance: British Citizen or a Dual UK national with British citizenship

Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.

More about the role:

MBDA's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at MBDA's headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Our client is a trusted partner of the UK's Ministry of Defence, and they are currently seeking a highly skilled Electrical Manufacturing Technician with extensive experience in the field. The selected candidate will be responsible for various tasks, including assembly, inspection, and testing. They will receive clear direction from a knowledgeable team leader regarding the priorities associated with these functions.

To be an Electrical Manufacturing Technician, one must have a versatile and flexible skillset and be able to certify products. The candidate should be skilled in using a variety of equipment, tools, gauges, and measuring instruments to create, fix, and alter company products to meet specified build standards and requirements.

What we're looking for:

• Strong team player with a focus on customer satisfaction
• Demonstrated ability to plan, organise, and adapt to changing circumstances
• Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship

"OR"

• Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3

"OR"

• Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3

"OR"

• Vocational NVQ3 with Further Education, BTEC ONC/HNC
• Skilled individual with relevant experience (please highlight on your CV)

What you'll get to do as an Electrical Manufacturing Technician:

The candidate is expected to have experience in electrical wiring and assembly and a versatile skill set applicable to various tasks. They should be familiar with manufacturing equipment, tools, and measuring instruments and be able to meet manufacturing build, inspection, and test time requirements. The candidate should uphold high craftsmanship standards and product quality, ensure compliance with manufacturing procedures, prioritise maintaining a safe working environment, and share best practices with team members. Additionally, they should be able to certify products according to the certification procedure and conduct regular audits to maintain product certification and approval.

"Please Note: Our client requires all employees to achieve the appropriate clearance relevant to the role"

More about the role:

Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at their headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Our client is a trusted partner of the UK's Ministry of Defence, and they are currently seeking a highly skilled Electrical Manufacturing Technician with extensive experience in the field. The selected candidate will be responsible for various tasks, including assembly, inspection, and testing. They will receive clear direction from a knowledgeable team leader regarding the priorities associated with these functions.

To be an Electrical Manufacturing Technician, one must have a versatile and flexible skillset and be able to certify products. The candidate should be skilled in using a variety of equipment, tools, gauges, and measuring instruments to create, fix, and alter company products to meet specified build standards and requirements.

What we're looking for:

• Strong team player with a focus on customer satisfaction
• Demonstrated ability to plan, organise, and adapt to changing circumstances
• Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship

"OR"

• Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3

"OR"

• Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3

"OR"

• Vocational NVQ3 with Further Education, BTEC ONC/HNC
• Skilled individual with relevant experience (please highlight on your CV)

What you'll get to do as an Electrical Manufacturing Technician:

The candidate is expected to have experience in electrical wiring and assembly and a versatile skill set applicable to various tasks. They should be familiar with manufacturing equipment, tools, and measuring instruments and be able to meet manufacturing build, inspection, and test time requirements. The candidate should uphold high craftsmanship standards and product quality, ensure compliance with manufacturing procedures, prioritise maintaining a safe working environment, and share best practices with team members. Additionally, they should be able to certify products according to the certification procedure and conduct regular audits to maintain product certification and approval.

Security Clearance: British Citizen or a Dual UK national with British citizenship

Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.

More about the role:

Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at their headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Our client, a trusted partner of the UK's Ministry of Defence, seeks a highly skilled Manufacturing Engineer specialising in Assembly and Integration. The successful candidate will play a crucial role in producing and assembling missiles. This contract opportunity may lead to a permanent position or an extension. A full apprenticeship and certificate copy is required. The role is full-time with a hybrid work schedule - in Bolton.

As the Manufacturing Engineer in charge of missile assembly, it is crucial that you ensure the efficient and cost-effective production of our client's products. Your role in the Manufacturing Engineering team is critical, and you will be accountable for supporting several manufacturing projects.

What we're looking for:

• Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 with a formal further education certificate to HNC or equivalent in a relevant subject.

"or": A BEng degree in a relevant engineering field."

"or": A minimum of twenty years of experience working as a manufacturing engineer."

• Knowledge to interpret design drawings to produce manufacturing build instructions for skilled and semi-skilled operators
• Experience in Electronic Sub Assembly manufacture through to System level builds and expertise and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems.
• Excellent interpersonal and communication skills with the ability to work in a diverse team and the ability to read, analyse and interpret documents for accuracy and compliance with Code
• Effective collaboration, customer understanding, and prompt response are crucial.
• Understand and work with Company Processes and Procedures.
• It is highly essential to have Electrostatic Discharge (ESD) training and SAP experience.

What you'll get to do as a Manufacturing Engineer (Assembly and Integration)

• In charge of compiling and updating manufacturing instructions.
• Responsible for designing, commissioning, and testing the associated tooling.
• Assist in the industrial validation process using tools such as FMEAs and FAIs.
• Resolve technical problems that may arise during the manufacturing process and update route card to reflect changes because of re-works in activities
• To ensure proper configuration control, it's essential to incorporate design modifications into the manufacturing instructions.
• Support the Non-Conformance Process using SAP.

"Please Note: MBDA UK requires all employees to achieve the appropriate clearance relevant to the role"

British Citizen or a Dual UK national with British citizenship

Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team.

More about the role

MBDA's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at MBDA's headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Machine Operator

Hemel Hempstead

Monday - Friday

7am - 4pm

You will be required to operate the numerous machines within in the production environment

Previous machine expereince desirable and history of working within manufacturing

The comapny make interior and exterior doors, of metal and wood.

Training is provided

Graet long term opportunity

Please send yor CV to Laura at Newstaff Employment Luton

Our client is a trusted partner of the UK's Ministry of Defence, and they are currently seeking a highly skilled Electrical Manufacturing Technician with extensive experience in the field. The selected candidate will be responsible for various tasks, including assembly, inspection, and testing. They will receive clear direction from a knowledgeable team leader regarding the priorities associated with these functions.

To be an Electrical Manufacturing Technician, one must have a versatile and flexible skillset and be able to certify products. The candidate should be skilled in using a variety of equipment, tools, gauges, and measuring instruments to create, fix, and alter company products to meet specified build standards and requirements.

What we're looking for:

• Strong team player with a focus on customer satisfaction
• Demonstrated ability to plan, organise, and adapt to changing circumstances
• Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship

"OR"

• Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3

"OR"

• Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3

"OR"

• Vocational NVQ3 with Further Education, BTEC ONC/HNC
• Skilled individual with relevant experience (please highlight on your CV)

What you'll get to do as an Electrical Manufacturing Technician:

The candidate is expected to have experience in electrical wiring and assembly and a versatile skill set applicable to various tasks. They should be familiar with manufacturing equipment, tools, and measuring instruments and be able to meet manufacturing build, inspection, and test time requirements. The candidate should uphold high craftsmanship standards and product quality, ensure compliance with manufacturing procedures, prioritise maintaining a safe working environment, and share best practices with team members. Additionally, they should be able to certify products according to the certification procedure and conduct regular audits to maintain product certification and approval.

"Please Note: Our client requires all employees to achieve the appropriate clearance relevant to the role"

More about the role:

Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at their headquarters in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.

Guidant Global has partnered with a highly reputable Ministry of Defence organisation in the UK, and our client is seeking a proficient Development and Production Test Engineer with expertise in Electronic/Electrical engineering. The role will entail technical support to the manufacturing test of weapons sub-systems in production and development tests and diagnostics of complex weapons at system and subsystem levels.

What we're looking for:

• The ideal candidate should possess an HNC/HND (Electronics) Level of Qualification or an equivalent degree and substantial experience in digital and analogue electronics manufacturing and testing.
• Measurement and testing principles, along with the use of necessary equipment, is an asset.
• Knowledge of the customary CADMID product lifecycle pertaining to test equipment is deemed advantageous.
• RF and microwave technology would be highly beneficial, particularly at the subsystem level.
• Environmental testing, which includes ESS (Environmental Stress Screening), would be considered beneficial for this role.
• Proficient in oral and written communication, capable of creating comprehensive test specifications, operator instructions, and technical reports based on complex higher-level requirements.
• Proven analytical and problem-solving skills, with strong attention to detail.
• Plan and organise own work to ensure multiple tasks can be prioritised and delivered against Project objectives.
• Manual handling and ESD training.
• Medical requirements
• None Health surveillance requirements

What you'll get to do as a Development and Production Test Engineer - Electronic/Electrical:

This job involves providing Test Engineering support throughout the different stages of the Design/Development process until Production Readiness Review and release to Operations. You will assist in introducing Test Facilities and ensure that the equipment and facilities are under configuration control before use. Your duties will also involve supporting the testing of electrical/electronic weapon systems and sub-assemblies, including diagnosing production test failures down to circuit card and component levels. You will promptly identify remedial and corrective actions, evaluate technical problems, develop proposals for test equipment investigations and corrective actions, and represent Test Engineering at Defect Review Board meetings to ensure efficient progress towards corrective action.

More about the role:

Our client's relationship with the UK military spans back over 70 years. They have delivered countless landmarks in defence engineering, supplying vital defence capability to meet the needs of the armed forces over land, sea, and air.

This role is based at their headquarters site in Stevenage which plays a key part in missiles operations. The site also offers excellent transportation links and boasts an onsite gym and coffee shop. Training and development are offered to all employees.

Guidant Global is acting as an Employment Business in relation to this vacancy.