• You will serve as a Quality Assurance Specialist (SHIPBUILDING) in the San Diego, CA Detachment QA group of SUPERVISOR OF SHIPBUILDING BATH.
• You will provide primary contractual and quality oversight of the Government contracted Shipbuilding and repair efforts.
• You will execute a Quality Assurance program tailored to the specific facility by the team lead, the Specialist continuously reviews and assesses the acceptability of the Contractor's QA program.
• You will document findings and concerns are captured for review by senior Navy and contractor personnel.
• You will record observations, concerns, corrective actions undertaken and issues still outstanding.
• You will apply extensive knowledge and experience in reading, interpreting and working to construction design and fabrication drawings.
• You will provide oversight focus to steel working processes utilized in modern ship building, including the cutting, shaping, forming, and joining of structural and plate steel; structural and pipe weld joint preparation.

• You will plan, organize, and direct the activities of assigned Industrial Quality Department Branch to ensure that assigned personnel complies with legal and regulatory requirements and meets customer needs.
• You will conduct quality audits and investigations, analyzing the results and developing recommendations for corrections and improvements.
• You will ensure that verification of essential quality requirements is accomplished, deficiencies are properly documented, and corrective action is taken to prevent recurrence.
• You will plan and schedule work in a manner that motes a smooth flow, even distribution and adjust short-term priorities to meet schedules.
• You will establish manpower requirements and negotiate with Integrated Product Team (IPT) Leads to ensure adequate Quality Assurance (QA) support.
• You will identify requirements and initiate requests for additional resources including personnel, overtime, equipment, supplies, and space to ensure success in meeting goals and objectives.
• You will evaluate performance of subordinates, give instructions, provide advice, and counsel to subordinates on performance, technical, and administrative matters.
• You will hear and resolve complaints at the lowest level, referring grievances and serious complaints not resolved to higher level supervision.
• You will provide continuing assistance to all areas to resolve product/process quality issues, to implement process improvements, and to identify and resolve safety related issues/violations.

• The nurse consultant applies expert clinical knowledge to guide patient safety/clinical risk management practices with the goal of enhancing health care delivery and decreasing the risk-of adverse events.
• Utilize statistical and epidemiological tools to assist staff in the analysis of data from adverse/sentinel events, close calls/near misses, or project findings.
• Serve as a facilitator and guides patient safety review teams in the identification of the causes of adverse events as well as identifying and implementing practical, measurable, and sustainable corrective actions.
• Participate in continuous readiness projects and conducts site visits to assess organizational processes for compliance with regulatory agency and accreditation standards requirements.
• The incumbent utilizes a combination of patient safety tools and evidence-based practices to improve measures of quality and patient safety.

Supervises a staff of air traffic control specialist who are responsible for carrying out air traffic control assignments within a geographic area. Plans and assigns work to be accomplished by subordinate employees. Sets work priorities and schedules. Approves leave; gives advice, counsel, and instruction to employees on both work and administrative matters. Evaluates performance of employees and recommends performance ratings. Hears and resolves complaints from employees and refers group grievances and more serious unresolved complaints to a higher level manager. Identifies and arranges for developmental and other training needs of employees. Finds ways to improve production or increase the quality of the work directed. Adjusts staffing levels and work procedures to accommodate resource decisions made at higher levels. Recommends goals and objectives for the area and tracks accomplishments. Communicates and reinforces diversity and EEO policies and programs in all areas of responsibilities, including selection, training, and transfers. Supports and participates in the labor management partnership process, and fosters a work environment where all employees are treated in a fair and equitable manner. The Operations Supervisor reports to the Operations Manager. Performance is evaluated upon the effectiveness with which assigned program objectives are achieved.

Build your best future with the Johnson Controls team!

As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.  Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! Please note this position requires that you work as needed it at either Camp Lejeune and Cherry Point. Relocation assistance can be provided it to anyone that lives over 200 miles from either location, also a sign-on-bonus can be provided it to those who qualify.

What we offer

• Competitive base salary and a comprehensive bonus program.
• Three weeks paid vacation in a calendar year/holidays/sick time/three PTO days in a calendar year.
• Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one. 
• Extensive product and on the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy
• Providing Scheduling and management support.
• JCI Employee discount programs (The Loop by Perk Spot)

Click on this link to learn more about JCI: https://youtu.be/pdZMNrDJviY

What you will do

Under general direction, responsible for the design, configuration, and operation of complete building control systems including fire, security, and other low voltage control sub-systems (i.e., lighting, nurse call, data networks, etc.) to meet the intent of the project requirements.  Accountable to field teams for quality, timeliness and efficiency of designs.  Develops complex software programs, commissioning and troubleshooting to ensure proper operations of the building control system. Provides detailed information and submittals to communicate design and operation to customers, consultants, Johnson Controls field installation team and subcontractors

How you will do it

Coordinates and creates of necessary drawings and equipment schedules for submittals and installation.

Selects, orders, and tracks the delivery of materials for assigned projects.  Coordinate’s factory-mounting processes to meet factory and project schedule.

Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation.

Provides field change information to the project team for the creation of as-built drawings and software.

Keeps management and JCI contractor or customer informed of job progress and issues.

Assists in performing site-specific training for owner / operator on the total building control system.

Participates in release meeting with project field team. 

Performs value engineering to provide cost effective results while maintaining customer satisfaction. May provide work direction to Systems Design Assistants. Adheres to safety standards. High degree of regard to employee and subcontractor safety

What we look for

Required

Degree in Mechanical/Electrical engineering or equivalent experience.

Prefers someone with a Mechanical/Electrical degree even if no experience.

Demonstrated knowledge of the construction industry or HVAC industry.

Experience working with building low voltage systems.

Ability to relate technical knowledge to a non-technical audience.

Demonstrated advanced computer skills required, particularly computer-related drafting tools.

Open to a recent graduate with a Mechanical or Electrical engineering degree.

Preferred

BA Degree in Engineering.

Demonstrated knowledge of the control theory, automatic temperature controls, building automation systems and other building subsystems.

Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols.

Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

ACI is seeking a Cyber Security Engineer to join our team in Fort Bliss, TX  The ideal candidate will be responsible for ensuring IT system compliance with all applicable laws, DoD policies, and standards.  Perform system scans, analyze results, and write necessary reports and plans. Provide Network Environment (NE) and Computing Environment (CE) support, including implementing all applicable IA vulnerability alerts (IAVA), IA vulnerability bulletins (IAVB), and technical advisories (TA). Develop and implement Standard Operating Procedures (SOPs), System Security Plans (SSP), Plans of Actions and Milestones (POA&Ms), and other related documents to satisfy Assessment and Authorization (A&A) requirements per NIST 800-53, FISMA, Risk Management Framework (RMF) and other government guidelines, as required to achieve and maintain an ATO (Authority to Operate).

What You’ll Get to Do:

• Implement and apply technologies, processes, and practices designed to protect networks, devices, programs, and data from malicious attack, damage, or unauthorized access.

• Maintain computer systems, networks, and other related device, including implementing all applicable IA vulnerability alerts (IAVA), IA vulnerability bulletins (IAVB), and technical advisories (TA).

• Investigate IT-related security incidents to determine the extent of compromise to national security information and automated information systems. May provide intrusion support to high technology investigations in the form of network assessments.

• Researches and maintains proficiency in tools, techniques, countermeasures, and trends in computer and network vulnerabilities, data hiding and network and device security and encryption. Performs duties in support of in-house and external customers.

• Configures and validates secure systems, and tests security products/systems to detect computer and information security weaknesses.

• Generates security architecture documentation.

• Provides critical written and verbal analyses of previously generated security architecture documentation and vulnerability and risk assessments.

• Develop and implement documentation to satisfy NIST 800-53, FISMA, and Risk Management Framework (RMF) requirements. Designs and implements Plans of Action and Milestones (POAM) to remediate findings from vulnerability and risk assessments. Provides information assurance for digital information, ensuring its confidentiality, integrity, and availability. Responsibilities include monitoring and testing of IT systems for vulnerabilities and indications of compromise, incident response and remediation, and compliance with applicable government and other external standards.

You’ll Bring These Qualifications:

• An active DoD TS/SCI Clearance.

• Be able to obtain a Poly.

• Must have at least 5 years of interpreting and implementing DoD directives, instructions, and policies that provide direction and guidance and applying them to CE and NE.

• Knowledge of the Assessment & Authorization (A&A), and NIST RMF processes.

• Experience installing, maintaining, administering, and troubleshooting computer systems and networks.

• Experience with network security architecture to include, but not limited to firewalls, intrusion detection/prevention systems (IDS/IPS), content filtering devices, encryption devices, and DoD Public Key Infrastructure (PKI).

• Qualified at the IAT Level II for the DoD Information Assurance Workforce, must possess one of the following certifications:  CCNA-Security, GICSP, GSEC, Security+, or SSCP.

These Qualifications Would be Nice to Have:

• An active DoD TS/SCI with Poly Clearance.

• Familiar with scanning tools (e.g. NESSUS, ACAS, etc.). Familiar with Distributed Common Ground System (DCGS).

• Technical Writing experience (creating/updating IA policy & procedure documentation).

• Excellent written and verbal communication skills with strong presentation abilities.

• Must be able to work well on independent engagements as well as within a team setting; Strong client presence and interaction abilities.

• Excellent understanding of common computing platforms, including Windows Server, RedHat Linux Server, and vendor-specific appliance support.

• Some understanding of military hierarchy.

What We Can Offer You:

- We’ve been named a Best Place to Work by the Washington Post.

- Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives.

- We offer competitive benefits and learning and development opportunities.

- We are mission-oriented and ever vigilant in aligning our solutions with the nation’s highest priorities.

- For over 60 years, the principles of CACI’s unique, character-based culture have been the driving force behind our success.
 

Company Overview:

CACI is an Equal Opportunity/Affirmative Action Employer.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other protected characteristic.

Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here

The proposed salary range for this position is:

ACI is seeking a Cyber Security Engineer to join our team in Fort Cavazos, TX.  The ideal candidate will be responsible for ensuring IT system compliance with all applicable laws, DoD policies, and standards.  Perform system scans, analyze results, and write necessary reports and plans. Provide Network Environment (NE) and Computing Environment (CE) support, including implementing all applicable IA vulnerability alerts (IAVA), IA vulnerability bulletins (IAVB), and technical advisories (TA). Develop and implement Standard Operating Procedures (SOPs), System Security Plans (SSP), Plans of Actions and Milestones (POA&Ms), and other related documents to satisfy Assessment and Authorization (A&A) requirements per NIST 800-53, FISMA, Risk Management Framework (RMF) and other government guidelines, as required to achieve and maintain an ATO (Authority to Operate).

What You’ll Get to Do:

• Implement and apply technologies, processes, and practices designed to protect networks, devices, programs, and data from malicious attack, damage, or unauthorized access.

• Maintain computer systems, networks, and other related device, including implementing all applicable IA vulnerability alerts (IAVA), IA vulnerability bulletins (IAVB), and technical advisories (TA).

• Investigate IT-related security incidents to determine the extent of compromise to national security information and automated information systems. May provide intrusion support to high technology investigations in the form of network assessments.

• Researches and maintains proficiency in tools, techniques, countermeasures, and trends in computer and network vulnerabilities, data hiding and network and device security and encryption. Performs duties in support of in-house and external customers.

• Configures and validates secure systems, and tests security products/systems to detect computer and information security weaknesses.

• Generates security architecture documentation.

• Provides critical written and verbal analyses of previously generated security architecture documentation and vulnerability and risk assessments.

• Develop and implement documentation to satisfy NIST 800-53, FISMA, and Risk Management Framework (RMF) requirements. Designs and implements Plans of Action and Milestones (POAM) to remediate findings from vulnerability and risk assessments. Provides information assurance for digital information, ensuring its confidentiality, integrity, and availability. Responsibilities include monitoring and testing of IT systems for vulnerabilities and indications of compromise, incident response and remediation, and compliance with applicable government and other external standards.

You’ll Bring These Qualifications:

• An active DoD TS/SCI Clearance.

• Be able to obtain a Poly.

• Must have at least 5 years of interpreting and implementing DoD directives, instructions, and policies that provide direction and guidance and applying them to CE and NE.

• Knowledge of the Assessment & Authorization (A&A), and NIST RMF processes.

• Experience installing, maintaining, administering, and troubleshooting computer systems and networks.

• Experience with network security architecture to include, but not limited to firewalls, intrusion detection/prevention systems (IDS/IPS), content filtering devices, encryption devices, and DoD Public Key Infrastructure (PKI).

• Qualified at the IAT Level II for the DoD Information Assurance Workforce, must possess one of the following certifications:  CCNA-Security, GICSP, GSEC, Security+, or SSCP.

These Qualifications Would be Nice to Have:

• An active DoD TS/SCI with Poly Clearance.

• Familiar with scanning tools (e.g. NESSUS, ACAS, etc.). Familiar with Distributed Common Ground System (DCGS).

• Technical Writing experience (creating/updating IA policy & procedure documentation).

• Excellent written and verbal communication skills with strong presentation abilities.

• Must be able to work well on independent engagements as well as within a team setting; Strong client presence and interaction abilities.

• Excellent understanding of common computing platforms, including Windows Server, RedHat Linux Server, and vendor-specific appliance support.

• Some understanding of military hierarchy.

What We Can Offer You:

- We’ve been named a Best Place to Work by the Washington Post.

- Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives.

- We offer competitive benefits and learning and development opportunities.

- We are mission-oriented and ever vigilant in aligning our solutions with the nation’s highest priorities.

- For over 60 years, the principles of CACI’s unique, character-based culture have been the driving force behind our success.
 

Company Overview:

CACI is an Equal Opportunity/Affirmative Action Employer.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other protected characteristic.

Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here

The proposed salary range for this position is:

What You’ll Get to Do

CACI, Inc. is accepting applications for a Field Service Satellite Control Network Site Support Integrator (SSI) supporting the US Space Force Satellite Control Network (SCN) at Guam Tracking Station (GTS).
 

The SSI will be the depot-level liaison at the SCN location to interface, coordinate, monitor, problem solve, analyze and oversee depot-level work such as site modifications and development efforts).
 

More About the Role

The Site Support Integrator (SSI) will interface with site personnel and commander ensuring communication of upcoming efforts are approved ahead of any Government and Contractor travel or work. The SSI performs escort duties as requested by the Government and shall be responsible for coordinating Visitor Access Requests (VAR) and escort authorization. Will also provide site support to review TOs and drawings.  The SSI maintains and ensures accuracy of baseline site mission floor plan data and provides to stakeholders, upon request. The SSI also reviews schedules for implementation of engineering analysis, requirements affecting a specific system and coordinating scheduling requirements with the using command. Coordinate, monitor and assess the activities of all baseline equipment and software. Provides coordination with the user representatives at the operating locations. The CSSI also minimizes conflict with operations and provides technical assistance, ensures these activities are IAW approved installation criteria, plans and schedules that conform to the approved design. This SSI will also participate in hardware and software installations, tests, and acceptance activities.

You’ll Bring These Qualifications

• Viable candidates must hold, at minimum, a BA/BS degree or equivalent experience

• A minimum of 5 years' related work experience

• Must be a US Citizen and able to attain DoD Secret Security Clearance

• Solid understanding of operational technical manuals, drawings, and schematics required

• Experience with software and hardware testing and evaluation

• Proficient with Microsoft Office Tool Suite

What We Can Offer You:

• We’ve been named a Best Place to Work by the Washington Post.

• Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives.

• We offer competitive benefits and learning and development opportunities.

• We are mission-oriented and ever vigilant in aligning our solutions with the nation’s highest priorities.

• For over 55 years, the principles of CACI’s unique, character-based culture have been the driving force behind our success

Company Overview:

CACI is an Equal Opportunity/Affirmative Action Employer.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other protected characteristic.

Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here

The proposed salary range for this position is:

Job Description Summary

Job Description

We are the makers of possible 

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities. 

We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you’ll be supported to learn, grow and become your best self. Become a maker of possible with us.

DUTIES/RESPONSIBILITIES

• This role is Primarily located in the 100% Final Inspection Area.

• Perform visual inspection on Finish Good product to assure product meets final acceptance criteria according to inspection checklist.

• Measure materials/products using measurement tools and gauges (calipers, height gauge, rulers, pin gauges, etc.) and generate inspection records. Verify information for accuracy. Ensure that BD’s Good Documentation Practices (GDP) are followed.

• Sample and inspect raw materials, sub-assemblies, and final products for conformance to approved specifications.

• Perform and/or assist in First Article Inspections (FAI), Engineering Evaluations, and Defect Analyses.

• Experience with enterprise software; SAP experience strongly desired.

• Assist in managing activities regarding the disposition of non-conforming materials through Quality Notifications (QN); such as generating, routing, recording and the usage decision into SAP.

• Assist in the execution of Equipment Validations (IQ/OQ) and Test Method Validations (TMV) as an operator.

• Assure compliance to the Quality Management System (QMS).

• Able to learn quickly and work with minimal supervision.

• Perform other duties as assigned.

Education and Experience:

• High School diploma required or previous experience.

Knowledge and Skills:

• IPC-A-610 Specialist Certification desirable.

• Knowledge in GD&T

• One or more years of experience working as engineering technician or QC inspector.

• Knowledge in measuring equipment such as calipers, optical comparators, CMMs, height gauges, etc.

• Knowledge in SAP.

• Ability to work in a fast-paced environment. 

• Knowledge of GMP/SOP/Work Instructions and be able to develop techniques to ensure adherence to quality standards.   

• Ability to work well with others and direct their work activities as required.

• Good analytical skills. 

• May be required to work a flexible schedule. 

For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.

Why Join Us?

A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.  

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place.  

To learn more about BD visit https://bd.com/careers 

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status. 

Primary Work Location

Additional Locations

Work Shift

At BD, we are strongly committed to investing in our associates—their well-being and development, and in providing rewards and recognition opportunities that promote a performance-based culture.  We demonstrate this commitment by offering a valuable, competitive package of compensation and benefits programs which you can learn more about on our Careers Site under Our Commitment to You.

Salary ranges have been implemented to reward associates fairly and competitively, as well as to support recognition of associates’ progress, ranging from entry level to experts in their field, and talent mobility. There are many factors, such as location, that contribute to the range displayed. The salary offered to a successful candidate is based on experience, education, skills, and actual work location. Salary ranges may vary for Field-based and Remote roles.

Salary Range Information

Job Description Summary

Job Description

We are the makers of possible 

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities. 

We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you’ll be supported to learn, grow and become your best self. Become a maker of possible with us. 

DUTIES/RESPONSIBILITIES

• This role is Primarily located in the 100% Final Inspection Area.

• Perform visual inspection on Finish Good product to assure product meets final acceptance criteria according to inspection checklist.

• Measure materials/products using measurement tools and gauges (calipers, height gauge, rulers, pin gauges, etc.) and generate inspection records. Verify information for accuracy. Ensure that BD’s Good Documentation Practices (GDP) are followed.

• Sample and inspect raw materials, sub-assemblies, and final products for conformance to approved specifications.

• Perform and/or assist in First Article Inspections (FAI), Engineering Evaluations, and Defect Analyses.

• Experience with enterprise software; SAP experience strongly desired.

• Assist in managing activities regarding the disposition of non-conforming materials through Quality Notifications (QN); such as generating, routing, recording and the usage decision into SAP.

• Assist in the execution of Equipment Validations (IQ/OQ) and Test Method Validations (TMV) as an operator.

• Assure compliance to the Quality Management System (QMS).

• Able to learn quickly and work with minimal supervision.

• Perform other duties as assigned.

Education and Experience:

• High School diploma, preferred

• Minimum one year experience working as engineering technician or QC inspector

Knowledge and Skills:

• IPC-A-610 Specialist Certification desirable.

• Knowledge in GD&T.

• Knowledge in measuring equipment such as calipers, optical comparators, CMMs, height gauges, etc.

• Knowledge in SAP.

• Ability to work in a fast-paced environment. 

• Knowledge of GMP/SOP/Work Instructions and be able to develop techniques to ensure adherence to quality standards.   

• Ability to work well with others and direct their work activities as required.

• Good analytical skills. 

For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.

Why Join Us?

A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.  

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place.  

To learn more about BD visit https://bd.com/careers 

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status. 

Primary Work Location

Additional Locations

Work Shift

At BD, we are strongly committed to investing in our associates—their well-being and development, and in providing rewards and recognition opportunities that promote a performance-based culture.  We demonstrate this commitment by offering a valuable, competitive package of compensation and benefits programs which you can learn more about on our Careers Site under Our Commitment to You.

Salary ranges have been implemented to reward associates fairly and competitively, as well as to support recognition of associates’ progress, ranging from entry level to experts in their field, and talent mobility. There are many factors, such as location, that contribute to the range displayed. The salary offered to a successful candidate is based on experience, education, skills, and actual work location. Salary ranges may vary for Field-based and Remote roles.

Salary Range Information

Job Description Summary

Job Description

We are the makers of possible 

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities. 

We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you’ll be supported to learn, grow and become your best self. Become a maker of possible with us. 

DUTIES/RESPONSIBILITIES

• This role is Primarily located in the 100% Final Inspection Area.

• Perform visual inspection on Finish Good product to assure product meets final acceptance criteria according to inspection checklist.

• Measure materials/products using measurement tools and gauges (calipers, height gauge, rulers, pin gauges, etc.) and generate inspection records. Verify information for accuracy. Ensure that BD’s Good Documentation Practices (GDP) are followed.

• Sample and inspect raw materials, sub-assemblies, and final products for conformance to approved specifications.

• Perform and/or assist in First Article Inspections (FAI), Engineering Evaluations, and Defect Analyses.

• Experience with enterprise software; SAP experience strongly desired.

• Assist in managing activities regarding the disposition of non-conforming materials through Quality Notifications (QN); such as generating, routing, recording and the usage decision into SAP.

• Assist in the execution of Equipment Validations (IQ/OQ) and Test Method Validations (TMV) as an operator.

• Assure compliance to the Quality Management System (QMS).

• Able to learn quickly and work with minimal supervision.

• Perform other duties as assigned.

Education and Experience:

• High School diploma, preferred

• Minimum one year experience working as engineering technician or QC inspector

Knowledge and Skills:

• IPC-A-610 Specialist Certification desirable.

• Knowledge in GD&T.

• Knowledge in measuring equipment such as calipers, optical comparators, CMMs, height gauges, etc.

• Knowledge in SAP.

• Ability to work in a fast-paced environment. 

• Knowledge of GMP/SOP/Work Instructions and be able to develop techniques to ensure adherence to quality standards.   

• Ability to work well with others and direct their work activities as required.

• Good analytical skills. 

For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.

Why Join Us?

A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.  

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place.  

To learn more about BD visit https://bd.com/careers 

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status. 

Primary Work Location

Additional Locations

Work Shift

At BD, we are strongly committed to investing in our associates—their well-being and development, and in providing rewards and recognition opportunities that promote a performance-based culture.  We demonstrate this commitment by offering a valuable, competitive package of compensation and benefits programs which you can learn more about on our Careers Site under Our Commitment to You.

Salary ranges have been implemented to reward associates fairly and competitively, as well as to support recognition of associates’ progress, ranging from entry level to experts in their field, and talent mobility. There are many factors, such as location, that contribute to the range displayed. The salary offered to a successful candidate is based on experience, education, skills, and actual work location. Salary ranges may vary for Field-based and Remote roles.

Salary Range Information

About Us:

How many companies can say they’ve been in business for over 177 years?!

Here at ZEISS, we certainly can! As one of the pioneers of science, ZEISS handles the everchanging environment of our fast-paced world, meeting it with cutting edge technologies and continuous advancements. ZEISS believes that innovation and technology are the key to a sustainable future and solutions for global change. We have a diverse range of portfolios throughout the ZEISS family in segments like, Industrial Quality & Research, Medical Technology, Consumer Markets and Semiconductor Manufacturing Technology. We are a global company with over 42,000 employees and with over 4,000 in the US and Canada alone! Make a difference, come join the team!

What’s the role?

As a Field Service Technician, you get to work with an astonishing team that plays a vital role in Carl Zeiss Industrial Quality Solutions, LLC. Show case your skills and experience by process enhancements focused on installation and servicing of custom equipment. You will interact with customers and cross functional service groups that support and launch ZEISS products into the field. Additionally, you will aid the R&D team with engineering work in relation to design, build, and new system testing. This position will also support the production of systems during various stages of assembly and setup.

Sound Interesting?

Here’s what you’ll do:

• Install, Repair, Troubleshoot, Service and Calibrate high tech machines at customer locations.

• Demonstrate customer service skills and knowledge with a high level of passion and dedication.

• Demonstrate your ability to learn new skills on high tech CMM’s (Coordinate Measuring Machines) utilizing mechanical and electronic aptitude.

• Perform necessary administrative paperwork in a complete and accurate manner.

• Be Solutions-oriented with the ability to work independently in a high pressure, fast-paced and innovative environment.

• Travel requirement is 90-100% within the service area, including international travel as needed.

• Other duties as required.

Do you qualify?

• Minimum, High School graduate, completed GED or equivalent.

• Or, Tech School, associate, or bachelor’s degree in a technical discipline such as, Electronics, Industrial Mechanics, and the like.

• Or, Training and experience from a Military Technical School.

• Prior experience working with hand tools and basic electrical test equipment.

• Microsoft operating system knowledge is required.

• Capable of unassisted physical lift of one article weighing up to 75 pounds.

• Able and willing to work minimum of 50 hours per work week. Regular + OT.

• Ability to work in an industrial production shop floor environment.

• Valid Driver License required.

• Excellent communication and customer service aptitude.​

Nice to haves:

• Previous experience installing and troubleshooting industrial electronics, machines, or computer systems.

• Previous CMM (Coordinate Measuring Machine) installation and troubleshooting experience is preferred however not required.

Your ZEISS Recruiting Team:

Zeiss provides Equal Employment Opportunity without unlawful regard to an Applicants race, color, religion, creed, sex, gender, marital status, age, national origin or ancestry, physical or mental disability, medical condition, military or veteran status, citizen status, sexual orientation, pregnancy (includes childbirth, breastfeeding or related medical condition), genetic predisposition, carrier status, gender expression or identity, including transgender identity, or any other class or characteristic protected by federal, state, or local law of the employee (or the people with whom the employee associates, including relatives and friends). 

We are seeking a hard-working, innovative, detail-oriented and creative team player to join our Aptive team! This is a full-time Pest Control Technician position located on the road in the area around Vista, CA. This position will report to our office in San Diego, CA once per week. The individual we are looking for is also someone that enjoys working in a team environment, and excels working at an individual level.

• $19 - $23 an hour

• Uncapped sales and referral bonuses - this is unique to us, you’ve never had a bonus structure like this before!

• Up to 300 dollars in bi-weekly bonuses

• Company iPhone 13 provided

• Save money from driving our vehicle and insurance up to 15,000 in savings

What we offer:

• Ability to make overtime

• Company vehicle provided which can be taken home nightly

• Company gas card provided

• Ability to work outside in your local area

• Paid training

• Group Health, Dental, and Vision plans

• Pet insurance, Life insurance, and EAP benefits

• 401K with employer match up to 4%

• Paid holidays and paid time off

• Opportunity for advancement

• Upbeat and exciting company culture and much more!

Responsibilities include:

• Running a daily route where you will be resolving customer pest concerns and issues

• Maintaining truck and equipment in proper working order

• Keeping accurate records of treatments provided

• Mixing, applying, and working with pesticides following state and federal laws

• Serve as the subject matter expert for your customers by implementing the most efficient and overall best pest solution for each customer's individual needs

• Maintain and service all route customers according to company standards and procedures

• Advise customers of potential problems

• Keep management informed of any problems encountered on service routes

• Maintain proper inventory of pesticides in usage

• Please note that you will be assigned a route in your local area

Qualifications:

• This is an opportunity for a great career with no experience necessary; we will train you

• A US driver’s license that has been valid for a minimum of 4 years is required

• A clean driving record is required (no more than one moving violation in the past year and no more than 2 moving violations in the past 4 years)

• A drug test and background check will be performed on all new hires

Aptive Environmental:

Aptive Environmental provides pest control services to 34 states in the US. Co-founded in 2015 by Vess Pearson and David Royce, Aptive launched with the clear intention of becoming a world-recognized brand.

In 2021, Aptive was included in Inc. Magazine’s “Best in Business” list of companies that make a positive impact. Aptive is also featured on Glassdoor's 2019 list of Top 100 US workplaces and is ranked one of Entrepreneur Magazine's Best Companies in America. We are a proud member of the EPA's Pesticide Environmental Stewardship Program and have partnered with the United Nations Foundation’s "United to Beat Malaria" to help stop the spread of malaria transmitted by mosquito bites.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please inform your recruiter.

This role is located at our Austin site (on 290 East, near Toll 130). This is a 100% onsite role, not a remote or hybrid role.

Hardware Manufacturing Customer Experience Quality Engineering position

• Develops and applies quality standards in accordance with company and customer requirements. Develops and conducts related tests.
• Designs and implements methods and procedures for inspecting, testing, and evaluating the precision and accuracy of products and/ or production equipment.
• Develops methods and parameters, project methodology and/ or project proposals.
• Gathers operational and test data and evaluates results.
• Develops and uses procedures.  Prepares documentation for inspection/ testing procedures. Recommends corrective action for procedural, product, or process deficiencies.
• Analyze operational data – extensive analysis (~15% /week as needed) with Excel (Pivot and VLOOKUP) and Power BI; Develop and implement recommendations based on Field NC data analysis.  
• Evaluates work methods, procedures and policies. Tracks progress of qualification status, reviews reliability test results, determines disposition of non-compliant products, reviews and releases qualification packs 
• Utilizes drawings, specifications, industry standards, and sketches, adapting inspection measuring devices and procedures when necessary. Read and interpret technical drawings and specification requirements.
• Reduces qualification cycle time and cost while still meeting quality performance requirements. 
• Responsible for driving Continuous Improvement in the Quality of AMAT’s product portfolio
• Eliminate customer complaints and escalations. Participates in and may lead audits. 
• Work and demonstrate ability to closely lead multi-functional teams including but not limited to: experienced design and development engineers, Quality and Reliability engineers, Supply Chain Management teams, suppliers and technology partners in order to acquire and implement best known methodologies and deliver a better quality and customer experience than in current portfolio.
• Monitor field customer performance of product to identify issues and allow for early investigation and mitigation
• Drive investigation, capture, Root Cause Analysis, Containment, Corrective Action, Process Improvement to prevent issue recurrence, Monitor plans using statistical methods
• Conduct Quality Post-Mortem and document lessons learned reviews from current and older products to prevent recurrence of Quality issues and drive corrective actions into the next generation product portfolio
• Drive customer escalation resolution (root cause analysis, Containment, Corrective Action and Process Improvements following the 8D discipline format) to prevent recurrence of problems
• Drive Design, Quality, Reliability, lessons learned and VoC (Voice of Customer) requirements into new product designs to improve the quality and reliability of new products.
• Conduct Quality Post-Mortem and document lessons learned reviews from current and older products to prevent recurrence of Quality issues and drive corrective actions into the next generation product portfolio.
• Drive customer escalation resolution

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines.
• Microsoft Office applications (Excel proficiency required), Power BI
• Drive investigation 8D/SCAR Root Cause analysis and Corrective Action, Containment, Prevention, Proliferation measures, FMEA, DMAIC, Green Belt Certified or equivalent, Analytical tools (Paretos, Histograms, Ishikawa (Six Elements), Scatter, Control charts, checklists). Prevent recurrence.
• Experience in high volume manufacturing environments
• Proven track record working and managing customer issues and suppliers Key Performance Indicators (KPIs)
• Manage and coordinate customer PPM (Parts per Million) against supplier PPM, supplier problem solving on time, cost recovery and supplier warranty indicators
• Knowledge of Quality systems and measurements, Lean Manufacturing, Advanced Product Quality Planning (APQP), Product Part Approval Process (PPAP), PFMEA, ISO9001, Quality Assurance tools
• Undertake special projects as required
• Lead, Contribute and support continuous improvement activities
• Prepare and present reports at group meetings and internal customers
• Understanding of engineering drawings and manufacturing processes
• Ability to work in a diverse and dynamic environment
• Planning and prioritizing activities
• Good communication and interpersonal skills
• Negotiation and Influencing skills
• Ability to present data effectively
• Problem-solving skills
• Team working skills
• Analytical skills
• Time management
• Understanding of cost and financial impact

Travel:

• 0– 15%

Education

• Bachelor's Degree – Engineering, Computer Science or related Engineering Technology
• Advanced Quality Certifications
• 6 - 8 + Years of Experience job related

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements
• Self-motivated individual, Flexible, Adaptable. Optimistic, Self aware, Open to change
• Work mostly with minimal supervision Assertive, resilient and welcomes change and navigates through adversity
• Shows moral courage, openness and honesty in all dealings
• Engages interest and participation of others and has a collaborative approach to working with others
• Lead, support groups of technicians and engineers
• Training skills, provide guidance and coach other team members
• Supports and thrives on company values

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information
• Innovative thinking with high level of attention to detail and from original solutions

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Qualifications

Education:

Skills:

Certifications:

Languages:

Years of Experience:

Work Experience:

Additional Information

Time Type:

Employee Type:

Travel:

Relocation Eligible:

U.S. Salary Range:

The salary offered to a selected candidate will be based on multiple factors including location, hire grade, job-related knowledge, skills, experience, and with consideration of internal equity of our current team members. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation such as participation in a bonus and a stock award program, as applicable.

For all sales roles, the posted salary range is the Target Total Cash (TTC) range for the role, which is the sum of base salary and target bonus amount at 100% goal achievement.

Applied Materials is an Equal Opportunity Employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law. 

CACI provides expertise and technology to enterprise and mission customers in support of national security missions and government transformation for defense, intelligence, and civilian customers.

CACI’s culture is the driving force behind our success. Our culture defines who we are, how we act, and what we believe is both the right way and our duty in conducting business. Our culture unifies us as a company and strengthens our resolve to meet our customers’ – and our country’s – most critical missions.

CACI has a challenging and exciting opportunity for an experienced Software Systems Engineer to design the Vehicle Systems Manager (VSM) for overall integrated control of the NASA Lunar Gateway focusing on integration with ground and onboard human operators.

This position supports the Artemis Program and requires a motivated, capable person with strong verbal and written communication skills.  The individual must share our passion for our Nation's Space Program and share in the excitement of developing the next human-rated space vehicles. In addition to outstanding technical expertise, the individual must have strong customer relationship skills, possess a positive team-player attitude, be flexible and willing to take on new assignments and responsibilities as they arise, and be an articulate speaker able to communicate complex technical ideas in a convincing manner.

What You’ll Get to Do:

Develop and maintain program level Interface Control Document (ICD) and Interface Requirements Document (IRD).

• Mature VSM concepts and design related to human computer interaction and capture them in concept documentation.
• Provide creative solutions to advance VSM Software technologies through design deep dives.
• Lead an Integration Working Group to obtain agreement on key stakeholder inputs and outputs.
• Provide solutions to previously identified system gaps and ensure robustness of the proposed solution.
• Perform trade studies, analysis, and assessment of complex systems.
• Use custom and commercial tools (DOORS, Sharepoint, Confluence, MagicDraw) to access and maintain artifacts.
• Interface with NASA and spacecraft designer engineering and operations teams.
• Interface with domestic and international Gateway partners.
• Actively participate and present at Preliminary and Critical Design reviews and overseeing boards.
• Provide input to software architecture and design artifacts.
• Provide support to the Lunar Gateway Mission Management Working Group (MMWG).

This work takes place at NASA/JSC in Houston, TX, a highly stimulating and dynamic environment that is critical in human space flight and the space exploration initiative.

You’ll Bring These Qualifications:

• Must be a U.S. Citizen or Permanent Resident to facilitate access to USG facilities.
• B.S. in Electrical, Mechanical, Aerospace, Software, Computer, or Systems Engineering, Computer Science, or related disciplines.
• At least 3 years of software systems engineering experience including software design and development.
• Ability to present complex topics and defend proposed solution to large audiences.
• Experience developing/maintaining software architecture and design artifacts.
• Experience with EITHER:
  ​o Autonomous or remotely controlled systems (e.g., used in satellites, autonomous cars, or unmanned aerial vehicles), OR
  o Avionics and flight software development for human-rated space vehicles, e.g., Space Shuttle, International Space Station, Commercial Crew Vehicles, Orion Multi-Purpose Crew Vehicle, or Lunar Gateway.
• Evidence of success in fast-paced, collaborative projects/environments.
• Flexible, open to new challenges in a dynamic environment.
• Ability to manage multiple priorities with little supervision. 
• Responsible, team-oriented individual with strong work ethic.  
• Well-developed coordination and organization skills.
   

These Qualifications Would be Nice to Have:

• M.S. in Electrical, Mechanical, Aerospace, Software, Computer, or Systems Engineering, Computer Science, or related discipline.
• SysML experience.
• Experience or knowledge of database management.
• Experience with data management for software systems.
• Experience using MagicDraw and/or other Model Based Systems Engineering Tools.
• Experience in integrating distributed avionics and software systems.
• Experience with data driven software systems.
• Use case development experience.
• Experience in Agile software development environments and methodologies.
• Experience in the full life cycle of human-rated space vehicle flight projects (e.g., Space Shuttle, International Space Station, Commercial Crew Vehicles, or Orion).

What We Can Offer You:

- We’ve been named a Best Place to Work by the Washington Post.

- Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives.

- We offer competitive benefits and learning and development opportunities.

- We are mission-oriented and ever vigilant in aligning our solutions with the nation’s highest priorities.

- For over 60 years, the principles of CACI’s unique, character-based culture have been the driving force behind our success.

 

Company Overview:

CACI is an Equal Opportunity/Affirmative Action Employer.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other protected characteristic.

Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here

The proposed salary range for this position is: