Total 28 engineering job vacancies in fort worth texas

• Responsible for facility planning to include the development, maintenance, interpreting, modifying and adapting standards guides.
• Develop scopes of work and specifications for projects.
• Coordinate architectural, structural, civil, electrical and mechanical materials/installation for large and small contracts.
• Serve as a Contractor Officer Representative for assigned projects.

• Provide technical, analytical, and program maintenance management services in support of the Technology Development Directorate’s Flight Test Division. This includes technical problem solving via troubleshooting of complex aircraft systems.
• Responsible for all aspects of aircraft maintenance for flight test program supporting research programs involving the experimental flight testing of emerging aviation technologies on rotary-wing, fixed-wing and unmanned aircraft systems.
• Plan and track maintenance costs and schedules and manages maintenance resources and performance of the assigned multi-disciplinary team of military, civilian, and contract personnel for both scheduled and unscheduled maintenance.
• Communicate with the customer, users, and stakeholders across the Aviation Maintenance Enterprise to help determine supporting objectives and scope.
• Manage professional development for the aviation maintenance team through formal training or extensive on-the-job experience.

1. Accomplish initial planning functions to include facilities and equipment planning.
2. Review and evaluate suggestions involving equipment.
3. Ensure follow up is in place for facilities development.
4. Develop/revise standards for Equipment to track and maintain life cycle usefulness.
5. On new and proposed weapon system repair assignment, establish and identifies the common, Air Ground Equipment (AGE) and maintenance Ground Equipment (MGE) requirements.
6. Provide technical guidance and coordination on unusual technical problems (for equipment) encountered during the production cycle.
7. Value Engineering Techniques will be used to: Examine high volume/high value components for design changes, depot repair procedures, substitution of equipment, etc.; to investigate processes and repair procedures for improvement; to design adequate tooling for depot operations not covered by technical data and provides adequate fixtures and equipment for direct production support.
8. Support the Production Supervisors in production meetings and assist in identifying significant issues.
9. Comply with and assist in implementing Command standard business practices, policies & procedures.

• Instructs students through assigned blocks of instruction at basic and/or advanced levels.
• Develops and/or revises lesson plans and training materials.
• Monitors and evaluates student progress and performance.
• Inputs necessary data into the Technical Training Management System (TIMS).
• Maintains professional and technical expertise.

Responsibilities Instructs students through assigned blocks of instruction at basic and/or advanced levels.
Develops and/or revises lesson plans and training materials.
Monitors and evaluates student progress and performance.
Inputs necessary data into the Technical Training Management System (TTMS).
Maintains professional and technical expertise.

• Inspecting contractors operations to determine compliance with contract requirements.
• Establishing and maintaining horizontal and vertical control for construction contracts.
• Meeting with other district elements to assist in recommending solutions to engineering and management problems relating to acquisition of real estate rights-of-way, pipeline easements, setting soil boring locations.
• Utilize basic and advanced skills for use of land and hydrographic survey software and data collection hardware for the purpose of obtaining field data and producing work in final form.
• Using Global Positioning System (GPS) hardware and software to perform static and RTK surveys and when possible to layout and control construction, provide reference points, and lines for subsequent related work.
• Assisting project engineers in developing scopes of work, preparing Government estimates and technical specifications, and supervision and administration of contract survey work.

• Operates one or more types of heavy gasoline or diesel powered engineering and construction equipment
• Operates motor grader on flat or rolling terrain where exact specifications are required in grading unpaved roads for surfacing with clay and gravel
• Drives various vehicles (e.g., utility truck or similar vehicle (primarily under 10,000 gross vehicle weight) to and from the work site
• Operates close to buildings, trees, drop-offs, rocks, or other obstructions on all types of terrain and therefore, requiring increased operating control relevant to the complexity of the equipment
• Operates crawler type and mobile truck cranes to move earth, dig ditches and for other operations where maneuverability if not a major problem and accuracy is not critical

• You will identify and analyze problems; weigh relevance and accuracy of information.
• You will seek/generate and evaluate alternative perspectives/solutions and make timely effective recommendations, based on potential implications of findings or conclusions.
• You will understand and interpret technical material, rules, regulations, and instructions.
• You will identify pre and post acceptance testing on a specified product to ensure its safety, effectiveness, suitability, and survivability in an operational environment.
• You will develop and promulgate engineering technical strategy, policy, guidance, and plans.
• You will identify and document vulnerabilities and threats to minimize the risk or reduce the severity or probability of occurrence.
• You will plan, define, develop, and document quality requirements for products, services, processes, and systems that are suitable to the activity, proportional to the risk, and consistent with established Agency guidance, practices, and standards.
• You will convey written information in a clear, concise, organized, and convincing manner for the intended audience, using correct English grammar, punctuation, and spelling.
• You will identify a need for and knows where or how to gather information; organizes and maintain information or information management systems.
• You will apply knowledge of safety and occupational health principles, practices, procedures, law, and regulations as they relate to engineering tech performance requirements.

As a Engineering Equipment Operator your duties may include but are not limited to the following:

• Operate heavy equipment within accepted parameters (e.g., narrow quarters, such as close to buildings, drop-offs or other obstructions and challenging field conditions such as marshy, unsteady or steep surfaces).
• Clean, replace, or make minor adjustment to such parts as fuel, electrical, brakes, steering, regulators, water/fuel pumps, carburetors, cooling systems or attachments to vehicles or heavy equipment.
• Operate and maintain heavy motorized equipment (e.g. front-end loader, forklift, dump truck, farm agricultural tractor and implements, rubber tired backhoe/ loader, skid steer, excavator, bulldozer, road grader) and other pieces of equipment as needed for project activities.
• Apply shop mathematics, use measuring tools or instruments, follow oral and written instructions, use drawings, sketches, schematics, blueprints, etc. to determine work procedures and details of work layout.
• Use electrical, mechanical, carpentry, plumbing, welding, painting, or other trades skills to maintain, repair or construct a variety of buildings or structures.

As a Engineering Equipment Operator your duties may include, but are not limited to, the following:

• Operate heavy equipment within accepted parameters (e.g., narrow quarters, such as close to buildings, drop-offs or other obstructions and challenging field conditions such as marshy, unsteady or steep surfaces).
• Clean, replace, or make minor adjustment to such parts as fuel, electrical, brakes, steering, regulators, water/fuel pumps, carburetors, cooling systems or attachments to vehicles or heavy equipment.
• Operate and maintain heavy motorized equipment (e.g. front-end loader, forklift, dump truck, farm agricultural tractor and implements, rubber tired backhoe/ loader, skid steer, excavator, bulldozer, road grader) and other pieces of equipment as needed for project activities.
• Apply shop mathematics, use measuring tools or instruments, follow oral and written instructions, use drawings, sketches, schematics, blueprints, etc. to determine work procedures and details of work layout.
• Use electrical, mechanical, carpentry, plumbing, welding, painting, or other trades skills to maintain, repair or construct a variety of buildings or structures.

• Conduct industrial engineering and management studies of varying scope pertaining to processes, procedures, policies, regulations, manpower, equipment, materials, work quality, commercial activities program, and shop and facilities layouts.
• Acts as a DPW Point of Contact (POC) for facility condition and quality; maintains expertise in procedural and software changes, schedules reporting timeline for facility requirements, coordinates with customers following inspections.
• Acts as a SME in General Fund Enterprise Business System (GFEBS) and supporting databases for real property maintenance
• Prepares recurring and one-time management reports, briefings, and responses to higher headquarters taskings which may be used at all echelons, including activity, installation, MACOM, DA, and Department of Defense.
• Please limit your resume to 5 pages. If more than 5 pages are submitted, only the first 5 pages will be reviewed to determine your eligibility/qualifications.

• Operate a patrol grader and bulldozer with various standard attachments, in a variety of fine and rough grading.
• Construct new fire breaks,maintains or widen breaks, cuts new roads, etc.
• Operate grader and bulldozer in extremely difficult fine grading situations.
• Operate a mobile truck-mounted crane in work situations where maneuverability is restricted and/or accuracy is critical.

At the GS-4 level, you will:

• Assists in the performance of other standardized support duties such as the collection of literature references and the organization of files.
• Assists with routine steps in science studies and regulatory/compliance work.
• Supports higher-graded staff in planning for program management of environmental programs.
• Select appropriate methods and procedures for assignments based upon previous assignments or instructions.

At the GS-5 level, you will:

• Completes developmental assignments that expand the employee’s understanding of concepts, underlying principles, and program requirements and procedures.
• Assists with summary of environmental program information data for use in preparing reports and program evaluations.
• Performs routine tasks in science studies of a standard nature on regulatory and compliance issues and problems.
• Supports higher-graded staff in planning for program management of environmental programs.

One or more positions may be filled (in the organization advertised and/or in other organizations), if appropriate to the position.

• You will respond to emergency spills (e.g., oil) to implement immediate corrective action of abandoned hazardous waste or environmental violations.
• You will serve as the focal point for environmental information programs (e.g., industrial hazardous waste management, disposal, spill prevention, recovery) to provide guidance within a facility.
• You will lead a hazardous material management program to determine material handling is safe, environmentally-friendly, and regulatory-compliant.

The is a work-based learning course which includes a thorough grounding in engineering principles, concepts and theories while appreciating the complexity and interaction of managerial, technical and environmental issues in the modern workplace.

The course provides students with the knowledge, understanding and skills required to support career development in engineering design, manufacturing engineering, engineering operations management and engineering project management. Students will learn how to apply their knowledge and skills to the solution of real-world problems, analysing and evaluating practical issues involved in the design, specification, manufacturing technologies, maintenance and commissioning of mechanical equipment and associated systems.

You will study at University of Strathclyde, Glasgow for completion of a BEng (Hons in Engineering: Design and Manufacture through a mixture of work-based learning, distance learning and day release at university, this will take up to 4 years to complete.

Please apply in writing with your cover letter and CV to Neil Worsdall, General Manager info@newcolimited.co.uk