Total 176 Quality Assurance / Control job vacancies in D22 Jurong, Jurong Island, Tuas

Included but are not limited to:

• Implementing an effective and ongoing performance improvement program to monitor, evaluate and improve the quality, safety and appropriateness of care delivered to patients.
• Aligns Quality, Safety and Value with leadership roles, strategic planning and organizational culture.
• Aggregates data and participates in budget process to plan for current, emerging and future resource requirements (human, financial materiel and/or informational) based on Veteran care systems that produce high quality outcomes.
• Provides leadership in addressing ethical issues that impact the patient and staff in, or beyond, the organization and the local health care community

• This is not a Bargaining Unit Position
• This position is in the Excepted Service
• Current and former Federal employees must submit copies of their most recent SF-50, (Notice of Personnel Action). The SF-50 must identify the position title, series, grade, step, tenure and type of service (Competitive or Excepted). In some cases, more than one SF-50 may be required to show a higher grade previously held.

This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. Duties involve complex inspection work, requiring a wide variety of inspection processes and techniques, at remote worksites or field installations where a supervisor is not readily available. In these situations, work is performed very independently and decisions require a wide range of subjective judgments.

Inspects a large variety of heavy-duty mobile equipment, combat, tactical and automotive vehicles such as attack tanks, large cranes, tank retrievers, fire trucks, bridge transporters, armored vehicle launched bridges, bulldozers, road graders, crawler tractors, power shovels, self propelled earth compacting equipment, self propelled artillery, etc. May also inspect heavy artillery, small arms, powered support and other equipment or components of equal or lesser complexity.

Inspects complex, interrelated mechanical, hydraulic, pneumatic, electronic and electrical systems, equipment and their components while in operation or in a standby condition. Inspects and performs tests to braking, steering, and differential systems, which are mechanically integrated with the transmission; to large engines that directly power multiple hydraulic and pneumatic systems; to intricate fuel injection systems; to turret stabilization systems; and to other systems combined in a single, complex mechanical assembly. Uses specially designed testing methods and test equipment such as computerized test sets, precision gauges, electronic sensors, injector test stands, engine scopes, etc., to assure that tolerance and safety factors have been met.

Inspects equipment to determine repairs needed. Utilizes established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s). Considers a variety of factors such as cost and availability of parts, man-hours, and impact of time constraints on the mission to assess whether repair is economical. Recommends to a higher echelon to condemn equipment when the repair cost exceeds the established MEL. Prepares lists of needed repairs, parts, and man-hours authorized. Performs in-process inspections to assure that equipment is being repaired in accordance with pertinent requirements. Performs final inspection, certifying that equipment is in satisfactory operating condition, or rejects the work and returns the equipment to the repair shop with specific reports prescribing additional repairs.

Included but are not limited to:

• Implementing an effective and ongoing performance improvement program to monitor, evaluate and improve the quality, safety and appropriateness of care delivered to patients.
• Aligns Quality, Safety and Value with leadership roles, strategic planning and organizational culture.
• Aggregates data and participates in budget process to plan for current, emerging and future resource requirements (human, financial materiel and/or informational) based on Veteran care systems that produce high quality outcomes.
• Provides leadership in addressing ethical issues that impact the patient and staff in, or beyond, the organization and the local health care community

• This is not a Bargaining Unit Position
• This position is in the Excepted Service
• Current and former Federal employees must submit copies of their most recent SF-50, (Notice of Personnel Action). The SF-50 must identify the position title, series, grade, step, tenure and type of service (Competitive or Excepted). In some cases, more than one SF-50 may be required to show a higher grade previously held.
• This position is covered by a special rate.

No deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

This role ensures that all raw materials meet established quality standards and regulatory requirements to support manufacturing processes. The ideal candidate will have strong attention to detail, experience in analytical testing, and knowledge of pharmaceutical QC practices.

Key Responsibilities:

· Conduct Testing and Analysis: Perform qualitative and quantitative testing on raw materials following standard operating procedures (SOPs), Good Laboratory Practices (GLP), and Good Manufacturing Practices (GMP).

· Sample Preparation: Prepare samples of raw materials for analysis using appropriate techniques and equipment, such as HPLC, GC, FTIR, UV-Vis spectroscopy, and wet chemistry methods.

· Documentation and Reporting: Accurately document test results and observations, maintain detailed laboratory records, and prepare reports in compliance with regulatory standards.

· Compliance and Safety: Adhere to all quality and safety standards within the laboratory, ensuring all work is conducted according to regulatory guidelines (FDA, EMA) and company policies.

· Instrument Calibration and Maintenance: Ensure that laboratory equipment is properly calibrated and maintained; troubleshoot issues and coordinate with the maintenance team as needed.

· Inventory Management: Monitor raw material inventory levels, including reagents and supplies, and coordinate with the purchasing team to replenish stocks.

· Continuous Improvement: Participate in continuous improvement initiatives to enhance lab efficiency, accuracy, and safety, and identify potential areas for process optimization.

· Collaboration and Communication: Work closely with cross-functional teams, including production, QA, and R&D, to ensure timely support and resolution of QC issues.

Qualifications:

· Education: Diploma or Bachelor’s degree in Chemistry, Biochemistry, Pharmaceutical Sciences, or a related field.

· Experience: 1–3 years of experience in a QC laboratory within the pharmaceutical or biotech industry, with a focus on raw materials (experience with GMP and GLP preferred).

· Technical Skills: Proficiency in analytical testing techniques, especially HPLC, GC, FTIR, and wet chemistry methods. Familiarity with Laboratory Information Management Systems (LIMS) is a plus.

· Attention to Detail: Strong attention to detail and accuracy in testing, documentation, and reporting.

· Regulatory Knowledge: Understanding of industry regulations and standards, including FDA, ICH, and USP guidelines for raw materials.

Work Environment:

· Ability to work in a laboratory setting, which may involve exposure to chemicals and use of protective equipment.

· May require occasional lifting of equipment or samples (up to 25 lbs).

We seek an Automation Quality Assurance Engineer skilled in software testing to play a key role in the product development process and deliver high-quality software solutions that meet the clients' needs.

• Competitive remuneration package (up to $4,500 + AWS + VB).
• Hybrid working arrangement.
• Gain valuable skills in software testing methodologies with opportunities for professional development and career progression in QA.

Responsibilities:

• Design, develop, and sustain automation frameworks for testing software and hardware, process automation, and data integration.
• Develop comprehensive test cases and plans while maintaining scalable automation frameworks to support continuous integration and delivery.
• Run automated tests, evaluate results, and identify defects, performance concerns, and areas for enhancement.
• Integrate automated tests within CI/CD pipelines.
• Identify opportunities for automation to boost efficiency and minimize manual efforts.
• Document automation workflows, test cases, and outcomes for future reference and audit purposes.
• Assist with manual testing as required and handle other assigned responsibilities.

Job Requirements:

• Singaporean only.
• Minimum of 3 years experience in Software testing (Web-based application).
• Strong proficiency in automation development using Python / Selenium / Appium.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Prior experience in creating clear and concise test plans and test cases.
• Prior hands-on experience with API automation, test automation, and integrating it into CI/CD pipelines.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email dpo@scientecconsulting.com.
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering(Civil) or equivalen.
• At least 2 years(s) of working experience in the related field is required for this position.
• Required Skill(s): Understand drawing, Quantity take off, Prepare BQ, Familiar with costing, Supplier sourcing, Contract administration.
• Preferably Senior Executive specialized in Engineering-Civil/Construction/Structural or equivalent.
• Familar with structural steelworks.
• Other QS duties as assigned from time to time.

Job Title: Compliance Officer
Location: 2 Venture Drive #19-18 Vision Exchange Singapore 608526
Employment Type: Full-Time

About Us

Margin Wheeler is one of Singapore’s most trusted and best-reviewed Corporate Service Providers, offering a comprehensive suite of corporate solutions, including incorporation, compliance, accounting, and corporate secretarial services. With over 13 years of experience, we are committed to delivering high-quality, compliant, and efficient services to support businesses at every stage. As we continue to grow, we’re looking for a dedicated Compliance Officer to join our team and uphold our standards of regulatory excellence.

Job Description

The Compliance Officer will play a key role in supporting and enhancing our compliance framework. This role requires a detail-oriented professional with at least 2 years of experience in compliance within the CSP or financial services industry.

Key Responsibilities

• Regulatory Compliance: Monitor and ensure compliance with applicable laws, regulations, and guidelines, including ACRA, MAS, and AML/CFT requirements.
• Client Onboarding and KYC: Oversee client onboarding, performing due diligence and KYC checks in line with regulatory standards and company policies.
• Policies and Procedures: Develop, review, and update internal compliance policies and procedures to ensure adherence to regulatory changes.
• Risk Assessment: Conduct risk assessments on clients and business activities to identify potential compliance risks and propose mitigation strategies.
• Monitoring and Reporting: Implement and maintain a compliance monitoring program; report compliance issues and breaches to senior management, recommending corrective actions.
• Training: Educate and train employees on regulatory compliance, AML/CFT requirements, and any updates in relevant policies and procedures.
• Audit Support: Assist in preparing for internal and external audits, ensuring documentation and processes meet audit requirements.
• Liaison: Act as the point of contact with regulatory bodies, staying informed of regulatory updates and ensuring timely filings and notifications.

Requirements

• Education: Bachelor's degree in Law, Business, Finance, or a related field.
• Experience: Minimum of 2 years of experience in compliance within a Corporate Service Provider (CSP) or financial services environment.
• Knowledge: Familiarity with Singapore’s regulatory requirements for CSPs, including ACRA, AML/CFT, and MAS guidelines.
• Skills:
• Strong analytical and problem-solving skills.
  • Excellent attention to detail and high level of accuracy.
  • Strong written and verbal communication skills.
  • Ability to work independently and as part of a team.
  • Proficiency in compliance software and MS Office Suite.

Preferred Qualifications

• Certifications such as CAMS (Certified Anti-Money Laundering Specialist) or ICA (International Compliance Association) are a plus.
• Prior experience liaising with regulatory authorities.

What We Offer

• Competitive salary and benefits package
• Opportunities for professional growth and career advancement
• Collaborative work environment in a dynamic industry

If you’re a detail-oriented compliance professional looking to grow your career with a leading CSP, we encourage you to apply. Please send your resume and cover letter to hr@marginwheeler.com

What a System Quality Program Manager does at HP:

Manage Quality Programs:

• Lead quality assurance programs from initiation through closure, ensuring alignment with project scope, goals, and deliverables.
• Oversee all aspects of quality program management, including planning, budget and resource control.
• Conduct System At Glance Test, Workflow Duration Test, and Continuous Regression Test.
• Support priority test projects with direction, maintaining relationships with internal stakeholders and sharing information with testers via standardized reports and regular stand-up meetings.

Collaborate with Cross-Functional Teams:

• Work closely with cross-functional teams to define program requirements, identify risks, and ensure successful project execution within defined timelines, resources and budgets.

Execute Quality Assurance Plans:

• Define and manage comprehensive test plans to ensure HP Print ecosystem integration quality.
• Oversee test coverage, schedules, and resource adjustments to meet program objectives.

Monitor and Analyse Quality Metrics:

• Track quality metrics to ensure compliance with HP’s standards, conduct data analysis to identify improvement areas, and drive continuous improvement initiatives.
• Lead Data-Driven Decision Making.

Facilitate Communication:

• Act as a primary quality contact for stakeholders, communicating program status, risks, and escalations effectively.
• Prepare and maintain QA-related documentation, including test plans, test matrices, and testing reports.
• Provide regular updates and insights to senior management.

Encourage a Culture of Innovation and Continuous Improvement:

• Promote a collaborative environment, integrating new technologies and quality methodologies, and driving process enhancements.

Individuals who do well in this role at HP, usually possess:

• Four-year Degree in Computer Science, Software Engineering, Information Systems, Information Technology, or any other related discipline or commensurate work experience or demonstrated competence.
• Typically has 0-1 years of work experience, preferably in software quality assurance, test harnesses and QA focused tools, or a related field.
• Good to have skills and knowledge: Agile Methodology, CI/CD, Computer Science, JIRA, Scrum (Software Development), Software Development, Software Engineering, Software Quality (SQA/SQC), Software Testing.
• Test Planning, Knowledge in Quality and defect management.
• Any certifications are a plus: Project Management Professional (PMP) Certification, Lean Six Sigma Certification or equivalent quality certifications, Certified Quality Engineer (CQE), Certified Software Quality Engineer (CSQE), Certified Software Quality Engineer, Certified Associate in Software Quality (CASQ), Certified Software Test Engineer (CSTE).

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

Job Description & Requirements

Our team is looking for a Plant Inspector (Oil and Gas / Refinery) with experience in inspecting Cooling Towers and Boilers. As a Plant Inspector, you will be responsible for assistance in implementation of Testing & Inspection programs.

Roles & Responsibilities:

· Work as a member of the technical team to provide process engineering support for operations in the refinery.

· Provide technical advice / support to daily operational issues.

· Perform unit optimization, troubleshooting, de-bottlenecking studies.

· Lead/participate in safety initiatives including risk assessments and HAZOP reviews

· Support on-going reliability improvements and equipment strategy development

· Analyze complex technical issues, identify key drivers, propose strategy / recommendations to support decision-making/resolution of technical issues

· Responsible for the development/execution of margin improvement ideas/projects.

· Coordinate NDT activities, Inspection activities relevant to the API and Refinery owner standards.

· Review RT films, witnessing NDT activities to get unique results.

· Experience in CUI, CUPS programs.

· Interpret the rests of UTG/PAUT and do the fracture analysis and remaining life calculations.

· Ensure quality of inspected items to meet project requirements and refinery standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Fit-up Inspection and welding inspection, visual inspection

· Monitor and record welding parameter during welding as per WPS.

· Carry on & witness ferrite test inspection with Client after welding duplex / super duplex pipe spools weld joints.

· Witness for post weld heat treatment and review the reports. line check inspection, Pneumatic Testing, Hydro test, hot oil flushing, Chemical cleaning, Flood test, flushing & reinstatement, till the final stage of colour coding and valve tagging.

CRITERIA

· Graduate / Diploma Engineers with > 5 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· API 510 / 570 / 653, QAQC Qualified CSWIP 3.1 Welding inspector / Certified QAQC Inspector / Certified QA QC Engineer and NDT Level I & II.

· Expereince in inspecting Cooling Towers and Boilers is must.

· Experience in piping line walk, reinstatement inspections according to Isometric drawings.

· Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Master Microsoft Office include Excel, PowerPoint and Words.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Hardworking, Fast Learner, Mobile and Able to Work Long Hours/Public Holidays (OT Compensated) To Ensure Timely Completion of Tasks.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

Energetic & Result Orientated.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

(Annual Gross Salary: S$46,000 to S$50,000)

• Perform testing of petroleum products, refinery intermediate, process and effluent water
• Conduct sampling and testing of gases and LPG streams
• Perform QC/QA work including calibration and maintenance of equipment
• Perform stock-taking and reordering of chemicals and consumables

• Diploma in Science & Technology / Engineering or NITEC in Chemical Process Technology / Chemical & Life Science

Purpose of Position

• Provide maintenance and engineering support for process control systems to ensure safe and reliable operation of the plant.
• Provide technical and engineering support for projects and modifications related to control system to achieve business and operational objectives.

Principle Responsibilities

• Responsible for the maintenance and engineering of all process control systems which may be installed in the plant or externally at customers' site.
• Perform fine-tuning, troubleshooting, modification and programming of the Control System as needed to improve system performance and optimize process operation needs.
• Response to 24-hour emergency call-out and provide night-shift support during plant startup, shutdown and as requested by Operation Team.
• Work closely with the Instrument Team to troubleshoot and resolve instrumentation problems.
• Work with the Project Team to develop requirements and/or specifications of control system for projects and modifications; supervise & implement the project works according to the schedule and requirements.
• Plan and execute preventive and corrective maintenance works for plant turnaround.
• Perform strategy planning for control system expansion, upgrading and renewal.

Job Requirements

• Familiar and hand-on with the engineering tools and programming languages of control systems (Honeywell, Siemens PCS7 and Triconex), able to make program modifications and configuration changes confidently.
• Experienced and familiar with various phases of project works such as engineering, fabrication & construction and commissioning.
• Knowledge and experience with computer system networking, server/client and virtualization architectures.
• Degree in Electronics/Electrical Engineering, major in Control is preferred.
• Minimum 5 years relevant experience working and maintaining Honeywell DCS, Siemens PCS7, Triconex PLC and etc.

Job Description

The Quality Assurance Engineer is responsible to ensure that all products, processes, methods and equipment are validated and is the quality representative in Quality improvement projects. He/She handles external customer complaints and change management business processes. The QA Engineer expected to lead and drive cross functional team in day-to-day issues, global bench marking activities, internal process robustness and automations. He/She must be inclined to have hands-on understanding of tool and product functionality and production.

In this role, you will have the opportunity/responsibility to:

• Continuous improvement of Core Value Drivers and KPI’s in support of quality and business growth through the rigorous deployment of DBS tools
• Manage CAPA & 8D processes; assure root cause analysis and effectively implement robust CAPA in a timely manner. Follow-up and verification of CAPAs to assure no recurrence. Adhere to corporate escalation and reporting guidelines
• Strong focus on variation reduction using data driven approach and automotive core tools such PFMEA, Capability analysis/SPC. MSA etc.
• Proactively identify leading key Indicators and provide Manufacturing Quality Trend Charts/Analysis and suggest/implement improvements based on the trends.
• Support QMS to meet ISO 9001 requirements. Perform Internal Audits per the annual audit schedule, prepare report, follow-up and verification of completion of actions initiated from audit(s)
• Evaluates work methods, procedures and policies. Tracks progress of qualification status and reliability results & determine disposition of non-conforming processes.
• Lead and Support People engagement initiatives both site and global
• Drive efficiency, automation and digitalization in production & QM methods

The essential requirements of the job include:

• Minimum Bachelor’s degree in Engineering/Science
• Min 5 years relevant working experience in manufacturing with 3 years in Quality Control/Assurance in Semiconductor, Electronics or Automotive Manufacturing.
• Solid understanding of quality tools and methods. (FMEA, Control Plan, SPC, 5Why, FTA, 8D, 6 Sigma, Minitab/JMP)
• Certified Quality Engineer or Certified Lead auditor with thorough understanding of ISO 9001 2015 requirements
• Excellent English communication and Interpersonal skills.

It would be a plus if you also possess previous experience in:

• Previous exposure to the Manufacturing sector.
• Excellent problem-solving and analytical skills.
• Analytical and data visualization skills eg Tableau, Qlikview
• Lean / Kaizen proficiency/ black belt proficiency a plus

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

No deviation is seeking a dedicated and detail-oriented QC IPC Chemist for a 1 year Night shift only (8pm-8am) contract role in a leading pharmaceutical company. The ideal candidate will play a key role in ensuring the quality and compliance of products by supporting chemical analysis and testing according to regulatory standards. This is an excellent opportunity for a junior-level professional looking to gain valuable experience in the pharmaceutical industry.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Key Responsibilities:

• The IPC Chemist is responsible for ensuring that the manufacturing process remains consistent and meets predefined quality standards throughout the various stages of production. They perform tests and checks on samples taken during production to ensure that the intermediate stages align with quality specifications before the final product is manufactured.
• Conducts analytical testing using methods like HPLC, GC, FTIR, UV-Vis spectrometry, titrations, and other chemical assays to analyze the potency, purity, and identity of drug substances.
• Performs stability studies to assess how the quality of a drug substance or product changes over time under various environmental conditions.
• Tests for impurities, residual solvents, and microbial content to ensure compliance with regulatory guidelines.
• Prepares and maintains lab documentation, such as test results, standard operating procedures (SOPs), and analytical reports.
• Works in a controlled laboratory environment, following Good Laboratory Practices (GLP) and regulatory standards such as those from the FDA or EMA.

Qualifications and Experience:

• Diploma in Chemistry, Pharmaceutical Science, or a related field.
• Basic knowledge of analytical techniques such as HPLC, GC, UV, and wet chemistry.
• Familiarity with GMP, GLP, and relevant regulatory guidelines.
• Strong attention to detail, problem-solving skills, and ability to work independently.
• Excellent organizational skills and ability to maintain accurate documentation.
• Effective communication skills and a team-oriented mindset.
• Preferred Experience:
• Prior experience in a pharmaceutical or chemical laboratory setting is advantageous, but fresh graduates are welcome to apply.
• Contract Duration: 1 year, with potential for extension based on performance and business needs.

We are looking for QA Automation Engineer to join a FinTech company in Singapore!

• Exciting opportunity to work with a team of professionals to deliver high quality software applications
• Salary up to $4,500 + AWS + Bonuses (attractive employment benefits)
• Permanent position, opportunity to work on Blockchain/FinTech/Trading platform related projects

Responsibilities:

• Design, develop, and maintain automation frameworks for software & Hardware testing, process automation, and data integration
• Create detailed test cases, test plans and maintain salable automation frameworks to support continuous integration and delivery processes
• Execute automated test cases and analyze test results to identify defects, performance issues, and areas for improvement
• Integrate automated tests with CI/CD pipelines
• Identify areas where automation can improve operational efficiency and reduce manual intervention
• Document automation processes, test cases, and results for reference and auditing purposes
• Stay up-to-date and continuously improve the software testing process with new testing strategies, automation testing tools and methodologies
• Maintain strong verbal and written communication skills
• Support manual testing when needed and perform other duties as assigned

Requirements:

• Singaporean only
• Min 3 years of experience in automation testing using Selenium/Python/Appium
• Strong in Python scripting
• Experience in API automation, test automation and integrating it into CI/CD pipelines
• Domain knowledge in FinTech/Blockchain industry will be an added advantage

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email dpo@scientecconsulting.com.
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Liew Chien Hui - R2090138

ScienTec Consulting Pte Ltd - 11C5781

Job Title: DCS Engineer

Work Location: Jurong Island

Expected Start Date: 01 January 2025

Responsibilities for this position may include but not limited to:

• Provides engineering design, troubleshooting and maintenance of Distributed Control System (DCS)
• Troubleshoot day-to-day process problems related to process control applications, controller tuning and batch receipes execution
• Supports Process Hazard Analysis and implements process changes through a Management of Change Process
• Maintains up-to-date documentations for the DCS
• Conducts training programs for operators on DCS & Batch Receipes
• Initiates and manages DCS hardware life cycle, software and process control network upgrades
• Leads / supports development and execution of control system pojects, and greenfield projects

Required Qualifications

• Bachelor's Degree in Electrical / Electronics / Instrumentation and Control / Chemical from an accredited university
• Minimum 5 years of related work experience in DCS in the refinery, petrochemical or checmical industry
• Strong analytical / trouble-shooting skills
• Good interpersonal and communication skills
• Able to work independently in a team and in a diverse enviroment.

Preferred Qualification:

• Knowledge and work experience in Honeywell DCS System (TPS/EPKS DCS and Experion Batch)
• Knowledge in SQL Programming / Power BI, Process Controls Domain & Network adminstration.

Intersted candidates, do drop me your resume @ evonong@davyomega.com