Total 1,122 Manufacturing / Production job vacancies in 12 Tuas Loop

Job Description:

• Support set up of machinery to ensure on-time for mass production.
• Responsible for leading machine conversions and cleaning equipment.
• Assist in immediate breakdown restoration of machine function to achieve production output.
• Perform troubleshooting and diagnostic-based troubleshooting guide.
• Conduct on-the-job training for new production operators and technicians
• Statistical process monitoring and control lead to productivity improvements.
• Support continuous improvement initiatives toward production efficiency and quality.
• Design and fabricate simple jigs/fixtures to improve production processes.
• Carry out periodical maintenance for process machinery on schedule.
• Review process issues, and internal corrective action requests, assist in a customer complaint investigation, and conduct failure analysis.
• Assist new production introduction trial run.
• Ensure customer orders are fulfilled on time in full.
• Perform reconciliation and maintain an accurate inventory of materials and finished goods.
• Consistently adhere to good housekeeping practices and safety regulations.
• Responsible for completing and countersigning GMP documentation for traceability and submitting it to Management at the end of each processed order.
• Ensure workplace safety.
• Workplace housekeeping and cleanliness.
• Any other duties and responsibilities as assigned by the management.

Job Requirements:

• Preferably at least a Diploma / Higher NITEC / NITEC in Mechatronics / Electromechanical / Mechanical / Manufacturing / Electrical Engineering.
• Able to read basic engineering drawings.
• Fluent in both oral and written English.
• Knowledge of GMP will be an added advantage.
• Good communication and interpersonal skills.
• Able to support overtime and shift.
• Systematic and able to work under pressure.
• Able to work independently.

Job Description :

• Able to read and understand shop drawing.
• To conduct quality check, pre-pour & post pour.
• Liaise with all the relevant parties for production at factory.
• Production planning according to site needs.

Requirements :

• Precast experience would be added advantages.
• Able to communicate in English.
• Minimum Diploma in Civil /Structural /Materials.

Please whatsapp us your resume at 80826811

Job Summary

Allied Container Group is a leading container haulage operator and yard operator founded in Singapore in 1975. We are dedicated in using technology to improve the lives of small businesses and consumers in the logistics sector.

As part of the team, we are looking for Heavy Forklift Operator

Job Highlights

• We offer attractive salary commensurate with work experience
• Great opportunities for learning and career advancement
• Medical, dental and insurance benefits

Job Responsibilities

• Place empty and laden containers at the appropriate locations and in safe position.
• Place containers at locations assigned by the operations that makes workflow smooth, retrieve easy and release efficient
• Allocate appropriate space for container storage that makes retrieve easy and release efficient.
• Assist to shift containers within the depot when required.
• Carry out daily checks on forklift

Job Requirements

• Possess a heavy forklift driver license is required
• Experience with forklift used for handling container required
• Minimum 2 years of related working experience
• Physically fit and healthy
• Able to work under pressure and meet tight deadlines
• Working hours: Mon - Fri 8.00am to 5.00pm; Sat: 8.00am to 12.00nn
• Working location: Penjuru or Pioneer
• Transport provided from Jurong East MRT

The Advanced Remanufacturing and Technology Centre (ARTC) is seeking an experienced Senior Software Engineer to contribute to developing integrated smart manufacturing applications.

Key Responsibilities:

• Design and implement robust full-stack applications using .NET C# and Angular
• Develop scalable microservice architectures, and implement containerization and container orchestration
• Integrate AI/ML capabilities within manufacturing software, ensuring seamless interoperability across the ecosystem
• Implement efficient data management and real-time processing solutions, adhering to best practices in cloud-native software design
• Collaborate cross-functionally to align technical solutions with business requirements, evaluating and recommending appropriate technologies
• Contribute to the development of AI models and applications that enhance manufacturing operations and processes

Requirements:

• Bachelor/Master's degree in Computer Science, Software Engineering, or a related technical field
• 5+ years of experience in software development, with a focus on backend .NET C# and frontend Angular
• Proficient in designing and implementing maintainable, scalable, and secure software architectures
• Hands-on experience with containerization (Docker) and container orchestration (Kubernetes)
• Familiarity with cloud-native technologies and the ability to leverage cloud services from AWS or Azure
• Understanding of DevOps practices, including CI/CD pipelines
• Knowledge of AI/ML frameworks and the ability to integrate AI capabilities within manufacturing software
• Familiarity with industrial IoT and edge computing in manufacturing environments
• Strong problem-solving skills and the ability to learn new technologies quickly
• Excellent communication and collaboration skills to work effectively in a multi disciplinary team

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Remanufacturing and Technology Centre (ARTC) is seeking an experienced Senior Software Engineer to contribute to developing integrated smart manufacturing applications.

Key Responsibilities:

• Design and implement robust full-stack applications using .NET C# and Angular
• Develop scalable microservice architectures, and implement containerization and container orchestration
• Integrate AI/ML capabilities within manufacturing software, ensuring seamless interoperability across the ecosystem
• Implement efficient data management and real-time processing solutions, adhering to best practices in cloud-native software design
• Collaborate cross-functionally to align technical solutions with business requirements, evaluating and recommending appropriate technologies
• Contribute to the development of AI models and applications that enhance manufacturing operations and processes

Requirements:

• Bachelor/Master's degree in Computer Science, Software Engineering, or a related technical field
• 8 years of experience in software development, with a focus on backend .NET C# and frontend Angular
• Proficient in designing and implementing maintainable, scalable, and secure software architectures
• Hands-on experience with containerization (Docker) and container orchestration (Kubernetes)
• Familiarity with cloud-native technologies and the ability to leverage cloud services from AWS or Azure
• Understanding of DevOps practices, including CI/CD pipelines
• Knowledge of AI/ML frameworks and the ability to integrate AI capabilities within manufacturing software
• Familiarity with industrial IoT and edge computing in manufacturing environments
• Strong problem-solving skills and the ability to learn new technologies quickly
• Excellent communication and collaboration skills to work effectively in a multi disciplinary team

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Scope of Services

The Services required are set out as follows:

Multimedia Production

• Produce multimedia content for school.

• Provide videography/photography/animation support for coverage of school events and functions and provide editing.

• Work closely with ICT Support Team (i.e., ICT Associate, Desktop Engineers on multimedia requirements and support required by staff.

Multimedia Administration

Support Teaching and Learning

• Maintain and update school website.

• Provide multimedia support (e.g., photography, video production) to facilitate the delivery of lessons and events.

• Support administration tasks for teaching and learning (e.g., Burning of DVDs/CDs, printing of media resources etc.)

• Provide technical advice in terms of multimedia hardware and software that the school can purchase to support the teaching and learning in curricular and co-curricular areas.

Other Support/Duties

• Assist ICT Associate in managing requests from staff.

• Archive, manage and organize the school’s media collection. Other duties pertaining to the area of multimedia production and administrative work when assigned.

Qualification, Skill & Experience of the Contractor’s Personnel

The Personnel shall minimally have the following qualifications, skills and experience:

Qualifications:

• Minimum requirement of a relevant ITE/Higher NITEC, or equivalent certification on Multimedia knowledge

Experience:

• At least 2 years of experience working as a Multimedia Specialist, preferably in a school context.

• Preferably have experience managing photo-taking or video-taking projects.

Technical Expertise:

• Experience in providing Multimedia Support (e.g. Photography and photo editing, Videography).

• Have knowledge to maintain and update website.

KEY DUTIES AND RESPONSIBILITES:

• Perform various activities and tasks required in the tablet coating production areas.

• Operate all relevant equipment, clean, assemble and maintain the cleanliness of the equipment.

• Perform and maintain the documentation of operations in accordance with cGMP requirement.

• Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.

• Perform online monitoring of in process parameters / checks throughout the batch.

• Complete all relevant records and other documentation required for tablet coating, maintenance and cleaning of equipment in the work area.

• Perform all activities in accordance with cGMP.

• Maintain the cleanliness of work area to ensure cGMP compliance.

• Perform all other relevant duties required to meet the schedule.

• Check relevant material and product details against batch document

• Co-ordination with Engineering for break down rectification of coating and related solution mixing equipment.

• Involve in equipment / process qualification.

• Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.

• Ensure compliance to GxP / Safety / Quality policies.

REQUIREMENT

• Good understanding of safe working practices and cGMP.

• Experience in tablet coating of oral solid dosage manufacturing is preferred.

• A good team player with positive learning attitude.

• Willing to work in Tuas area, in cleanroom environment with full gowning.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology / Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines

• With 2-5 years of manufacturing experience in Pharmaceutical or related industries.

• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

Responsibilities:

• Perform daily production activities like loading/unloading of packaged chemicals, preweigh raw materials, monitor and feed equipment, pack finished goods.

• Able to operate, troubleshoot and perform general preventive maintenance on extruder and mixers.

• Perform basic QA testing and analysis to ensure product quality.

• Communicate and work closely with team to maximize production and reduce downtime.

• Perform raw material cycle count to ensure accurate inventory control in the warehouse.

• Involve and support in process improvement activities.

• Ensure proper housekeeping and safety in production area.

• Undertake any other ad hoc duties as assigned.

Requirements:

• Minimum Nitec in Chemical/Mechanical Engineering and equivalent disciplines.

• At least one year of experience in working in a chemical plant or related field.

• Knowledge and experience in twin screw extruder operation and maintenance is preferred.

• Positive working attitude, good team player, willingness to learn is important.

• Able to work in shifts.

Job duties and responsibilities:

• Lead the Production Division in formulating and implementing production business plans to achieve the company goals and objectives.
• Manage and promote the company’s core values, business objectives, and targets, including the development of supporting personnel and features for the continued growth of the company.
• Induct, train, coach, and develop human resource and succession planning for the division.
• Participate and contribute actively either as the chairman or as a member of the various committees of the company or any other company-wide gathering.
• Maintain the discipline and cohesiveness of staff under charge, working towards achieving the corporate objectives. Have a nose for recognising problems.
• Need to write to internal or external customers most effectively and concisely. Conversely, must be able to converse concisely and timely.
• Coordinate and take leadership of all the managers and assistant managers who are heads of their respective departments.
• Manage and delegate work within the division sphere.
• Lead in the management and control of budgets for jobs designated to the department.
• Led and formulated plans for the expansion and improvement of the production division.
• Oversee all production and maintenance projects to the satisfaction of the client's requirements by providing technical and management guidance to production departments.
• Ensure all production department projects are planned, coordinated, and executed smoothly to meet customers’ requirements with the highest quality and EHS compliance.
• Manage and deploy production resources (manpower, material, tools & equipment, logistics, technical, etc) efficiently and productively.
• Analyse job scope and plan resources with the department heads.
• Liaise with customers on job matters.
• Manage sub-contractors.
• Chair and conduct daily production and monthly safety committee meetings.
• Approve in-house training programmes and training materials.
• Conduct in-house training for staff and when required.
• Forecast the divisional requirements.
• Communicate and carry out the management requirements to subordinates.
• Implement the company’s IMS system for continuous improvement.
• Conduct post-project performance evaluation and identify areas for improvement.
• Ensure project costs are controlled within budget and minimize wastage.
• Continuously review and improve work methods and enhance the productivity of workers.
• Conduct an internal audit and self-assessment for IMS.
• Oversee the development of production indicators, man-hour standards, work instructions, and risk assessments.
• Act on behalf of the COO in his absence.
• Perform any other duties assigned by the COO.

Minimum Requirements:

• A Degree or Diploma in Engineering.
• Minimum 3 years experience in Engineering maintenance services
• Possess strong leadership and organisational qualities.
• Possess strong written and spoken communication skills.

Job Responsibilities·

• Keep production records including material stock records
• Coordinate and confirm goods receiving and goods outgoing documents to warehouse and QC·
• Support QC in printing and filing of COA and GHS SDS·
• Coordinate delivery orders from the customer service officers·
• Collect delivery tickets from drivers and do filing·
• Prepare a regular inventory list of goods from the GEO system·
• In charge of goods receiving and updating in GEO system
• Create Manufacturing Order and Batch Report for certain customers
• Print product labels and manage all product label templates

Job Requirement

• Education: At least GCE O/A Levels or ITE/Diploma in any field
• Proficiency in MS Office (Word, Excel, Powerpoint)
• Able to commence work on short notice or immediately

We are seeking an a Production Planner to join our UAV team. The ideal candidate will be responsible for planning, scheduling and coordinating production activities to ensure timely delivery of unmanned aerial vehicles (UAVs) while optimizing resources and maintaining quality standards. This role requires strong analytical, organizational, problem-solving skills and with a deep understanding of production planning and supply chain management.

Job Description:

a. Production Scheduling:

• Develop and implement detailed production schedules for UAV manufacturing, ensuring timely and efficient production.
• Adjust schedules based on changing demands, resource availability and unforeseen delays.

b. Inventory and Material Management:

• Monitor inventory levels and coordinate with procurement to ensure all materials and components are available.
• Optimize inventory levels to avoid shortages or excess stock.

c. Capacity Planning:

• Analyze production capacity and proposed allocation of resources (machinery, manpower, materials) to meet production targets.
• Collaborate with manufacturing team to ensure production aligns with available resources and equipment maintenance schedules.

d. Collaboration with Cross-functional Teams:

• Coordinate between engineering, procurement, quality assurance and manufacturing teams to ensure seamless workflow and communication.
• Work closely with program manager, quality control and procurement teams to align production with project timelines and customer demands.

e. Production Monitoring:

• Track production progress, identify bottlenecks and proactively adjust schedules to mitigate potential delays.
• Ensure that production goals are met while maintaining high standards of quality.

f. Data Reporting:

• Generate and present regular reports on production performance, inventory levels and resource utilization.

g. Quality Assurance:

• Work closely with the quality control team to ensure assmebled UAVs meet company standards

Job Requirements:

• Degree/ Diploma in either Supply Chain Management, Production/Operations Management or any related field.
• Possess 3 years of experience in production planning
• Proficiency in SAP production planning software and Microsoft Office Suite (Excel, Word, PowerPo (optional but preferred)

Job Responsibilities:

1. Closely monitor daily outputs and yield loss
2. Update data into SAP system and planner
3. Update data of dailyproduction activity into SAP system
4. Coordinate with production planner on daily production activity
5. Closing aging Production Order
6. Ensure BOM and Routing in the SAP system are accurate and update
7. Inventory control
8. Coordinate with warehouse to meet on-time delivery

Job Requirements:

1. Secondary School and above
2. Basic computer knowledge (Excel)
3. Basic knowledge of using SAP system

Job Overview

The Laundry Operator is responsible for washing, drying, folding, and pressing clothing, linens, and other textile items. They must operate and maintain laundry machines and ensure items are cleaned according to company and safety standards.

Job Descriptions & Requirements:-

• Operate washing machines, dryers, and pressing machines.
• Load and unload laundry from machines in a timely and efficient manner.
• Adjust machine settings based on fabric type and load size.
• Sort linens, clothing, and other laundry items by color, fabric, and washing instructions
• Identify items that require special treatment or dry cleaning.
• Inspect laundry for stains, tears, or damage and report these to supervisors
• Apply appropriate stain removers or special washing techniques.
• Safely use detergents, bleaches, fabric softeners, and other chemicals.
• Follow all safety protocols for handling chemicals and machines.
• Ensure the laundry area is clean and organized at all times.
• Regularly clean and maintain laundry machines and related equipment.
• Fold and press laundered items neatly and according to company standards.
• Ensure linens and clothing are wrinkle-free and well-presented.
• Address customer concerns and special instructions when needed.

Job Responsibilities

· Operate heavy forklift to load and/or stack containers

· Follow SOP & ensure safety protocols

· Daily maintenance checks of machine

· Identifying workplace safety hazards

Job Requirements

· Must possess Heavy Forklift licence

· Min. 1 year experience in operating heavy forklift (up to 26 tons)

· Must be able to work OT

· Good physical condition

· Good written and verbal communication

• Menyiapkan peralatan dan mengoperasikan mesin produksi yang ditugaskan oleh supervisor, dengan tetap mematuhi kebijakan perusahaan dan standar K3.
• Membantu pengaturan alur produks
• Melakukan inspeksi dan pemeliharaan peralatan secara berkala untuk memastikan kapasitas dan kualitas produksi tercapai secara konsisten