Total 1,000 Quality Assurance / Control job vacancies in FR - Paris - The Island

Duties and Responsibilities

• Serve as a technical expert for one or more high power and high voltage converter topologies and control subsystems or features, capable of independent decision making for critical technical issues
• Applies broad knowledge in sensors, power electronics control algorithms, electrical hardware design, software, signal processing, and data analysis methods and tools to drive power converter hardware design, control system and product development to improve product efficiency, minimize losses and increase power density of converter systems
• Leads the development and integration of innovative control system solutions to enable stable, efficient, and reliable production of grid tied power converters
• Leads the design and building of tools that allow debugging, analysis, and evaluation of control system performance. Leads the root cause analysis for control system failures in products for integration and fielded units during escalations
• Leads the electrical converter design and topology selection for improved product features to increase product market penetration and differentiation
• Provide guidance on PCB design, test and evaluation on specific control circuit board including gate driver, microcontroller board and others
• Conduct various device characterizations including design and development of verification test systems
• Lead and perform integration activities with mechanical and firmware team to troubleshoot the control system, design and execute test plans and test automation, and to develop and test the power converters
• Lead in the design failure mode and effects analysis (DFMEA), design for manufacturing, and design for cost reduction efforts
• Support on product certifications and compliance
• Documents work results with requirements, design specifications, procedures, and training materials
• Mentors junior engineers

Knowledge, Skills and Abilities

• Advance power electronics design: In depth knowledge on designing different converter topologies used on advance power electronics systems for the high voltage and high power applications
• Control System Design: Lead the design and development of advanced control systems for power converters, considering factors such as efficiency, stability, and grid integration
• Algorithm Development: Develop control algorithms and strategies for power converters to improve dynamic response, fault tolerance, and performance
• Modeling and Simulation: Create mathematical models and perform simulations to validate control system designs and optimize performance
• Software Implementation: Collaborate with software engineers to implement control algorithms in embedded software and firmware
• Testing and Validation: Design and execute test plans to validate control system performance and robustness
• Hardware Integration: lead and coordinate the integration of control electronics with power converter hardware
• PCB Design and Development: Work closely in the PCB design activities including test and verification
• Documentation: Prepare comprehensive documentation of control system designs, including specifications, schematics, and test reports
• Troubleshooting: Identify and resolve control-related issues during development and product testing phases
• Compliance: Ensure that control systems meet industry standards and regulatory requirements
• Mentorship: Provide guidance and mentorship to junior controls engineers

Qualifications

• Bachelor's or Master's degree in Electrical Engineering, Control Systems Engineering, or a related field
• Minimum of 25 years of experience in electrical hardware design and controls engineering, with a focus on advance power converter systems
• Proficiency in control system design, analysis, and simulation tools (e.g., MATLAB/Simulink)
• Strong programming skills in languages such as C/C++ for embedded systems
• Experience with hardware-in-the-loop (HIL) testing and control system validation
• Knowledge of grid integration, grid codes, and power quality standards is a plus
• Excellent problem-solving skills and attention to detail
• Effective communication and teamwork abilities
• Ability to work in a dynamic and collaborative environment

Job Descriptions:

* Development & Implementation of Instrumentation & Control, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Electrical Control Design

* Implementation of Process Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in instrumentation implementation

* Knowledge of Building Automation & Process Control

* Experience in BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical control, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to recruit@winsys.com.sg

We regret that only shortlisted candidates will be notified.

Responsibilities include but are not limited to:

• Drives a culture of "Do It Safe, Do It Right the First Time" with their actions and their words on a daily basis
• Manages multiple groups globally responsible for the implementation, continuous improvement, and troubleshooting of automation and control systems used for manufacturing ultrahigh purity materials supplied to the semiconductor and photovoltaic industries.
• Directly manage 10-15 US resources and dotted line management of dotted line discipline lead management of 5-10 resources in Asia (Korea, Taiwan, Singapore and Japan). Aptitude to expand reach beyond incumbent countries to France, China and other geographies as Semiconductor Materials globalize.
• Responsible for all design and support activities related to industrial power distribution, process instrumentation, industrial networks, and controls platforms globally.
• Responsible for significant level of Operation support in a 24-7, multi-site production environment including “on call” trouble ticket system for Operation Technology and Distributed Control System Issues.
• Responsible for establishing industry standard best practices across multiple global geographies.
• Responsible for delivering code compliant industrial controls systems for both green field, brown field and Process Development projects.
• Equally adept at self perform, third party and EPC model Automation and Controls and Operations Technology execution models. Ensures sufficient cross trained staff capable of all models globally.
• Responsible for developing and maintaining engineering standards used during project design and execution globally.
• Responsible for coordinating with other design disciplines for the efficient development, transfer and implementation of project requirements detailed on upstream documentation such as the P&ID.
• Responsible for maintaining compliance with internal engineering project execution standards.
• Deep understanding of standard Industrial network architectures globally.
• Understanding of ISA-99 Cyber Security Standard
• Understanding of ISA 85 Enterprise - Control System Integration Standard
• Understanding of ISA-84 Safety Instrumented Systems Standard.
• Responsible for managing the integration of the project into existing site specific industrial network and power distribution systems.
• Responsible for maintaining sufficient resources both internal and external to meet the needs of both capital projects and operational support. Globally manages resources across geographies including systems for remote support.
• Responsible for planning and articulating a roadmap for controls upgrades related to: adoption of best practices, internal minimum requirements, and obsolescence remediation.
• Requires significant creativity and leadership through problem solving
• 15% travel required (with 5% international) mostly to company sites
• Successfully completes all assigned trainings, and monitors the timely completion of training requirements of all direct reports
• Complete all assigned tasks, and monitors the timely completion of tasks assigned to direct reports

Duties and Responsibilities

• Support the development and integration of innovative control system solutions to enable stable, efficient, and reliable production of grid tied power converters
• Support the design and building of tools that allow debugging, analysis, and evaluation of control system performance.
• Conduct root cause analysis for control system failures in products for integration and fielded units during escalations.
• Perform PCB design, test and evaluation on specific control circuit board including gate driver, microcontroller board and others
• Conduct various device characterizations including design and development of verification test systems.
• Performs integration activities including troubleshooting the control system, designing and executing test plans and test automation, to ensure the algorithms functions as designed.
• Documents work results with requirements, design specifications, procedures, and training materials.

Knowledge, Skills and Abilities

• Control System Design: Assist in the design and development of advanced control systems for power converters, considering factors such as efficiency, stability, and grid integration.
• Software Implementation: Collaborate with software engineers to implement control algorithms in embedded software and firmware.
• Testing and Validation: Design and execute test plans to validate control system performance and robustness.
• Hardware Integration: Work closely with hardware engineers to ensure seamless integration of control electronics with power converter hardware.
• PCB Design and Development: Work closely in the PCB design activities including test and verification
• Documentation: Prepare comprehensive documentation of control system designs, including specifications, schematics, and test reports.
• Troubleshooting: Identify and resolve control-related issues during development and product testing phases.
• Compliance: Ensure that control systems meet industry standards and regulatory requirements.

Qualifications

• Bachelor's or Master's degree in Electrical Engineering, Control Systems Engineering, or a related field.
• Minimum of 7 years of experience in controls engineering, with a focus on power electronics field.
• Proficiency in control system design, analysis, and simulation tools (e.g., MATLAB/Simulink).
• Strong programming skills in languages such as C/C++ for embedded systems.
• Experience with hardware-in-the-loop (HIL) testing and control system validation.
• Knowledge of grid integration, grid codes, and power quality standards is a plus.
• Excellent problem-solving skills and attention to detail.
• Effective communication and teamwork abilities.
• Ability to work in a dynamic and collaborative environment.

• Monitor or observe operations to ensure that they meet production standards
• Recommend adjustments to the process or assembly
• Inspect, test, or measure materials or products being produced
• Measure products with rulers, calipers, gauges, or micrometers
• Accept or reject finished items
• Remove all products and materials that fail to meet specifications
• Discuss inspection results with those responsible for products
• Prepare report inspection and test data

Key accountability (Main purpose of this job):

Reporting to the Senior Finance Manager, this role is responsible for supporting the Finance department in various functions including accounts receivable (managing credit risk and ensuring timely payment from our customer, cashiering and accounts payable.

Responsibilities (Key areas of Responsibilities):

Debt Collection

• Develop and implement effective debt collection measures
• Monitor customer payments and alert the Senior Finance Manager of delinquent accounts
• Liaise with company lawyer/debt collectors to minimize bad debts
• Send reminder letters / make collection calls for overdue accounts

Financial Assistance

• Administer financial assistance schemes through modified instalment plans/bursary
• Attend to extensions requests

Discrepancy Resolution

• Resolve discrepancies related to non-payment of invoices

Reporting and Reconciliation

• Prepare credit-related reports (e.g., weekly debtors aging reports to management during semester fees collection
• Provide weekly forecast collections for cash flow management
• Undertake account reconciliations as required

Others

• Maintain students' billing addresses in the accounting system
• Assist in audits when necessary
• Apply receipts in the accounting system
• Assist with cashiering duties
• Attends to incoming email requests on timely manner
• Issue invoices/credit notes

Requirements:

• Diploma in Accounting or equivalent
• 2 years of relevant working experience but fresh graduates who are highly motivated and autonomous are encouraged to apply
• Advanced proficiency in Google Workspace
• Accurate and meticulous with excellent attention to details
• A team player with good interpersonal and communication skills
• Ability to work independently and diligently
• Able to work effectively and efficiently under pressure and within timelines
• Strong problem solving and multitasking skills
• Ability to remain firm and maintain high ethical standards

We are the concentrate team in PepsiCo working across the Beverage, Nutrition and Snacks categories to deliver concentrate for many of PepsiCo’s mega brands including Gatorade, 7Up and Pepsi. We are at the heart of PepsiCo products, sourcing ingredients to manufacture more than 1,200 recipes for our brands. We are a global organisation, situated in 17 locations across 11 countries offering careers in various functions from Manufacturing, Supply Chain, Procurement, Quality, Finance, R&D, HR and IT. We want team members who can collaborate in our fast paced global organisation and are passionate about creating and delivering much-loved household brands to markets across the world.

The Technical Function is our team of enabling experts offering knowledge and partnership to functions on specialist subjects including engineering, quality and productivity. They ensure operations and food safety excellence for our team. Could you bring a new dimension to our technical expertise? If so we could take your talents to a whole new level.

This role requires supporting Quality Control requirements for finished goods as part of the QC team. Specific responsibilities can be expected to rotate between the finished goods and raw materials laboratories.

Kindly note that this role will require AM & PM shift work. AM shift timing is 7.30am to 4pm & PM shift timing is 3.30pm to 12 midnight. Transport will be provided.

Responsibilities:

• Responsible for the daily laboratory planning, prioritization and analysis of in-process and / or finished product samples in accordance to documented testing methodology.
• Provide accurate and timely disposition of Flavour Raw Materials and Finished Concentrates in accordance with the Company's accept/reject criteria.
• Ensure all instrumentation used in the testing of products are validated and calibrated to standard.
• Ensure all laboratory records are kept in accordance with the Company's protocol.
• Compile and report relevant KPI's monthly to Lab supervisor. Implement quality initiatives and quality strategic initiatives appropriate to level.
• Responsible for blocking and communicating any batches rejected or placed on-hold to operations and raise relevant Trackwise record for follow-up.
• Complete quality activities in the introduction of new product. Trouble shoot issues and carry out bench scale investigations where required.
• Analyse the data/trend and challenge non-value-added activities to streamline the Lab operations.
• Adhere to PepsiCo Health and Safety requirements.
• Ad hoc duties or projects as assigned by Lab supervisor.

Qualifications:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree in Food Science, Microbiology or Equivalent.
• Computer literate
• At least 3 years work experience in a relevant field.
• System and operational knowledge - SAP, LIMS systems and Gas Chromatography, HPLC operational and troubleshooting experience is an added advantage.
• An understanding of GMP/GLP and other key manufacturing processes
• Ability to planning, manage priorities and deliver results to meet internal customer requirements.
• Experience in building excellent working relationships with operations team members
• Good Communication Skills across all levels in an organization.
• Good Attention to detail
• Self-starter, proactive in delivering results and a good organizer
• Strong Team Player

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

ABOUT THE NATIONAL INSTITUTE OF EDUCATION (NIE)

The National Institute of Education (NIE), Singapore, is Singapore’s national teacher education institute and we are proud to be an integral part of the nation’s education service. We play a key role in the preparation of teachers and in the provision of teacher professional and school leadership development programmes. We are committed to our vision of being An Institute of Distinction: Leading the Future of Education and our mission to Inspire Learning, Transform Teaching and Advance Research.

NIE invites suitable candidates to join the Division of Academic Computing & Information Services (ACIS) as a Security Analyst for Governance, Risk, and Compliance (GRC). This is a 3-year contract position.

Key Responsibilities:

Governance

• Coordinate with internal and external audit teams and assist in audit planning.
• Help deliver security awareness programs for staff and manage security governance efforts.
• Stay updated on IT trends and recommend best practices to align with governance policies.
• Support cybersecurity projects to ensure alignment with security objectives.

Risk Management

• Assist in identifying and assessing IT risks and managing vulnerabilities and threats.
• Support risk management in cybersecurity projects by focusing on threats and vulnerabilities.
• Track and monitor audit remediation actions related to risk management.
• Measure the effectiveness of security awareness programs to minimize risks from human error.
  

Compliance

• Ensure compliance with internal standards (ISO 27001, ISO 22301) and external regulations.
• Facilitate responses to internal and external IT audits.
• Participate in audit engagements and report on audit issues and remediation.
• Provide ongoing compliance reporting to ensure timely remediation of audit findings.

Requirements:

Educational Qualification(s)

• A University Degree in Information Technology, Cybersecurity, Risk Management, or Compliance, or an equivalent qualification.
• Desirable Certifications: CISSP, CISM, CISA, CRISC, or other relevant certifications.

Relevant Experience

• 3-5 years of experience in Information Security, IT Risk Management, or Compliance, preferably in a higher education or similar environment.
• Experience with IT security audits and compliance reviews in regulated industries.
• Experience with vendor security assessments and managing third-party security risks.
• Experience in security awareness training and working in cross-functional teams.

Knowledge Required

• Security Frameworks: ISO 27001, CTM, NIST, CIS controls, and their application in operational environments.
• Regulatory Standards: Understanding of the Cybersecurity Bill, PDPA, and related security laws.
• Risk Management: Knowledge of risk assessments, mitigation strategies, and identifying threats to information systems.
• Audit Processes: Understanding security audit processes, compliance, and remediation.
• IT System: Good knowledge of IT infrastructure, application management, and cybersecurity practices.
• GRC Tools: Experience with Governance, Risk, and Compliance platforms and software is advantageous.

Skills and Competencies

• Analytical Skills: Ability to analyze security risks and make data-driven decisions.
• Communication Skills: Ability to convey technical security concepts to non-technical audiences and document findings.
• Problem-Solving: Strong problem-solving capabilities, particularly during security incidents.
• Attention to Detail: High focus on detail in audits and risk assessments.
• Project Management: Ability to manage multiple projects, prioritize tasks, and meet deadlines.
• Team Collaboration: Proven ability to work with cross-functional teams (IT, legal, compliance, vendors).

Other Personal Attributes

• Integrity and Confidentiality: High ethical standards and the ability to handle sensitive information.
• Proactivity: Ability to act independently and proactively address security challenges.
• Adaptability: Capable of adjusting to evolving security threats and changes in regulations.
• Resilience under Pressure: Ability to make sound decisions under pressure, particularly during audits or security incidents.

Other Information

NIE staff can take chartered buses at their own expense from or near their home to the NIE campus. This is subject to the availability of bus routes and seats.

Req ID: R00018942

Job Responsibilities:

• Develop and implement quality assurance plans, standards, and protocols for production or project management.
• Review project specifications and engineering drawings to establish quality standards.
• Ensure all work complies with relevant codes, ISO standards and regulations.
• Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database.
• Identify and document any quality issues, non-conformance and corrective actions.
• Providing guidance and advice to the Project Manager on significant changes to the quality management system with direct impact on site operations.
• Training the production team on quality control measures to improve product excellence.
• Collaborate with production, engineering and project management teams to identify and implement process improvements.
• Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements.
• Conduct root cause analysis for site level NCRs and recommend corrective action and preventive actions.
• Overall knowledge of safety policies and procedures to achieve safe work practices.

Requirements:

• Diploma /Degree in Engineering, Quality Management or related filed.
• Minimum 5 to 8 years of working experience quality assurance/control in industrial /equipment production or engineering projects would be advantageous.
• Proficient in quality inspection tools, data analysis and report writing.
• Up to date knowledge of federal and industry standards and best practices.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Excellent problem solving and analytical skills.
• Keen attention to detail.
• Willingness to travel for site inspections.
• Able to work independently and a good team player.
• Candidate who can start work within short notice or immediately would be advantageous.

General Overview

This position is part of the Instrument, Control and Electrical team that provides maintenance and technical support to the Production, Mechanical and Project teams in the LNG Terminal. This position is responsible for establishing, reviewing and overseeing the relevant instrument & control design of newly build or modified equipment including implementation of minor instrument and control engineering projects, while ensuring the overall technical integrity of the terminal from the instrument & control (I&C) discipline perspective.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Provide technical support and solutions for the Production and Maintenance teams for instrument-related issues
• Liaise closely with Production and Maintenance teams as to how to reduce instrument maintenance costs and increase availability and functionality.
• Liaise with external stakeholder including government agencies on possible gas pipeline network and electrical power grid, instrument and metering interfaces to ensure conformity.
• Prepare and update instrument maintenance procedures for all instruments, PLC, Fire & Gas system, ESD, metering, CCTV and security equipment is up to date
• Conduct root cause analysis for instrument related incident and recommend preventive and corrective actions to prevent future occurrence
• Carry out MOCs project to resolve and improve instrument reliability and operational issues from engineering, construction to commissioning
• Ensure verification, inspection, testing and reporting to management in respect of all electrical and instrument equipment used for maintenance and their certification for use in hazardous areas of the terminal.
• Participate and provide support in execution of maintenance or major equipment turnarounds in the terminal
• Manage functional safety lifecycle of SIS in the Terminal
• Support expansion project from meeting overall facility integrity point of view, ensure smooth integration and any opportunity to leverage with existing Plant is captured
• The incumbent shall also participate in emergency response and may be assigned to a specific role and responsibility for such purpose.

Work Experience

• Minimum eight (8) years practical experience in an instrument & control maintenance / design function in an oil & gas or petrochemical Plant
• Conversant with local codes, regulations and submission procedures, and must possess expert knowledge of electrical & instrument international engineering design
• Experience in functional safety for the process industry as per IEC 61511. Certified functional safety engineer will be an advantage
• Experience in installation, commissioning, maintenance and trouble shooting of a variety of large and complex electrical, instrument and control equipment in the oil, gas or petrochemical industry is required.
• Experience with common PLC programming software and languages and able to troubleshoot third party equipment issues through program debugging. Experience with Siemens PLC will be an advantage

Education

• The candidate must have a good Degree in Electrical & Electronics Engineering or equivalent.
• Candidate with professional accreditation or affiliation to professional bodies of engineers will have an advantage.

Performance Criteria

• Able to carry out day to day activities with minimum supervision.
• Able to perform installation, commissioning, maintenance and trouble shooting of a variety of large and complex electrical equipment and related instruments.
• In addition, the successful candidate should possess the following personal attributes:

1. Highly analytical and meticulous.
2. Strong interpersonal, written and verbal communication skills
3. Excellent negotiating and influencing skills to manage external and internal stakeholders and third parties

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact win@hkmsvs.com for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Review and verify documentation (e.g., certifications, test reports).
• Conduct audits of contractors, suppliers, and fabrication yards.
• Ensure implementation of Quality Management Systems (QMS).
• Monitor and report on quality performance metrics.
• Identify areas for quality improvement.
• Collaborate with engineers, contractors, and operations personnel.
• Promote and enforce safety protocols and regulations.
• Maintain accurate records of inspections, test results, and deficiencies.
• Stay updated on industry developments, standards, and best practices
• Required to be at site

• Devising and implementing methods and procedures for inspecting, testing and evaluating the
  precision and accuracy of products and production equipment.
• Designing and analyzing inspection and testing processes, mechanisms, and equipment.
• Conducting quality assurance tests and performing statistical analysis to assess the level of
  control and manage product quality risks.
• Undertaking root cause analysis of incidents requiring corrective action.
• Ensures that corrective measures and deviation meet acceptable reliability standards and that
  documentation is compliant with requirements An Experienced Professional (P2) applies practical
  knowledge of job area typically obtained through advanced education and work experience.