Total 16 job vacancies by Lam Research Singapore Pte Ltd

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

The Group You’ll Be A Part Of

This position will be part of the Business Operations team, based in Singapore, providing order fulfillment support to account team, as well as office general administrative support.

What You’ll Do

Order Fulfillment

• Responsible for order fulfillment activities
• Provide Slotting and Configuration support including submitting slot/configuration change CTL, NSR follow up, SAP quote update, POA review
• Generate weekly BSR, BOBJ, outstanding PO, weekly meeting and ACU reports
• Provide necessary support to complete tool shipment including resolution of shipping document issues
• Support quarter end closure, ensure that all documentation is accounted for revenue recognition
• Provide SAP/NSR training to AT as required
• Responsible for key related KPIs (ILT Changes, Configuration Accuracy, SRD stability)

Office General Administration Support

• Handling general correspondence, including phone enquires and postal mail
• Manage office cleaning contracts and janitors’ day to day work schedules
• Manage and procurement of office supplies, cleanroom supplies, pantry supplies, customer year end gifts and ensuring equipment are properly maintained
• Employees support such as business cards, name plates and corporate telco subscriptions enquires
• Support the business operations director during QxR cycles on GA OpEx forecast
• Any other task assign by the immediate supervisor

Who We’re Looking For

• Nitec/Diploma/Degree in Business administration or similar discipline
• 5 years’ relevant experience in order fulfillment, relevant to semiconductor field
• Familiar to Lam products and experiences is a plus
• Experience in office administration and contractor management is a plus
• Excellent knowledge with MS Office Suite especially with MS Excel and MS Power Point
• Familiar with SAP experience is a plus
• Good communication and interpersonal relations skill
• Independent and can multi-task
• Meticulous with good organizing skill

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Lam Research is seeking a Senior Automation Engineer to participate in the development of laboratory control systems that support operations and internal business associates. The successful candidate must demonstrate high levels of motivation, individual responsibility, and accountability; able to perform the essential functions listed below. The ideal candidate will be familiar with the software development life cycle including (SLDC) the planning, design, development, deployment, and sustaining stages. They also require an in-depth knowledge of different programming languages, frameworks, and tools.

Software Developers will know how to write elegant code based on product specifications and requirements. They should be familiar with testing, debugging, and improving their code and the work of their team members to deliver products on timely, cost, and effective manner. The ability to learn new programming languages, collect feedback and improve existing software is a desirable quality in applicants. They also require a good understanding of algorithms, flow charts and mathematical concepts that form the basis of computer programming.

The Impact You’ll Make

As a Software Engineer at Lam, you will be at the forefront of innovation by designing, developing, and troubleshooting, and debugging software programs. Your role is pivotal in developing software tools that support design, infrastructure, and technology platforms. Your expertise will determine hardware compatibility and influence design, ensuring seamless integration between software and hardware.

In this role, you’ll make an impact across Lam’s entire product portfolio of equipment working within our centralized software engineering team, collaborating with some of the brightest minds in the industry.

What You’ll Do

• Full ownership of equipment interface (EI) SDLC.
• Able to understand abstract concepts, adapt to laboratory environments (clean room) and transform into automation solutions. Design, develop and maintain new and existing custom automation solutions.
• Work with different groups to provide solutions to operational challenges.
• Respond to customers’ requests and support resolving issues as they occur.
• Gather requirements and generate specifications for software systems.
• Develop software to control semiconductor manufacturing machines. Work cross-functionally with GIS, Process/Equipment Engineers and Operations to increase efficiency and quality.
• Contribute to the improvement of Software Development Life Cycle. Adapt and prioritize work based on changing needs of the operation.
• Provide end user support by participating in on-call rotation.
• Supports remote locations and defines procedures to avoid recurrences.
• Availability to travel to remote sites (domestic and international)

Minimum Qualifications:

• B.S. degree in Computer Science, Electrical Engineering, or similar field required, M.S. degree desired.
• Previous experience with SEMI SECS/GEM protocol, tool characterization, semiconductor manufacturing equipment and clean-room expansion.
• 5+ years relevant experience in manufacturing environment (semiconductors preferred).
• Experience with mission-critical semiconductor manufacturing systems: MES, SPC, APC, FDC, RTD, CMMS and integration technologies.
• Understands software engineering principles and SDLC. Experience with Microsoft Development Tools (Visual Studio, .Net).
• Experience in Object Oriented Programming.
• Working knowledge in SQL and RDBMS.
• Proactive and able to work in a dynamic and team-oriented environment.
• High level problem solving, attention to details and effective communication skills.

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Position Summary:

This is a 12-month contractual position. This position is responsible for supporting the Regional Operations and Lam Quality Program in the region and primarily working on generating and analyzing first level data, report compilation and administrative support.

Job Responsibilities:

Support Quality Management Program

1. Build customer trust through consistent communication and reporting.
2. Contribute to the Quality Community & collaborate with all regional QPLs.
3. Admin and support role in the Lam Quality Management through the IQMS (Integrated Quality Management System):

- IRF (Investigation Request Form) submission review & approval

- GQ (Global Quality) report Update requested information (E.g. damage code)

- GQ report NCe (Non-Conformity external) with Inv Group - Field Service

- Reverse logistic report

- GQ report Needing Action (FQM (Functional Quality Manager)/ QPL (Quality Program Lead)) Report

• ETS (Event Tracking System) tickets follow up
• NCe audits

Regional Operations Support

• Compilation of CADO (Cost Allocation Distribution Options), mandatory retrofit and tool in install reports and follow up with end users for closure.

Job Requirements:

• Professional certificates or tertiary education equivalent (A levels, Diploma, Nitec)
• Possesses strong inter-personal, negotiation and communications skills.
• Possesses strong Microsoft Office application skills
• Strong analytical skills and experience in MS PowerBI/ Qlik Sense application will be advantageous

Position Summary:

This role is the global leader responsibility for Service Desk, Deskside Support and End user device asset management/life cycle for all regions including North America, Asia, India and Europe. This role is responsible for leading a distributed global team, internaltional travel required to visit different Lam sites (1-3 times/quarter)

Job Responsibilities:

• Set and seeks to continually improve and reinforce the service standards for end user support and assest management.
• Establishes benchmarking for end user support. Identifies/implements improvements for service level, user satisfaction and KPIs.
• Escalation point for complex or longstanding support issues.
• Provides guidance and professional development to team members. Foesters a positive and collaborative team culture.
• Develops/executes strategies for lifecycle of end user assets. Implements best practices for procurement, deployment, maintenance, and retirement of hardware and software.
• Manages ans tracks quaterly budget forecast/adjustment, resource planning and future technology spends.
• Maintains and improves the lifecycle management systems to ensure that assets are being properly documented and adequately tracked.
• Maintains and improves procedures for incident management.
• Leads and oversees the planning, execution and completion of operational and continous improvement projects within the IT support domain.

Job Requirements:

• BA, BS, or MS in Computer Science, IS/IT, or equivalent with 8-10 years of related experience and 5+ years in management
• ITIL certifications are desired
• Experience with ServiceNow (Incident management and Asset management) highly preferred.
• Experience with managing global team with different language/culture background.

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties