Total 410 job vacancies by Renesas Electronics

Looking for a highly experienced Analog Design Manager to join the 2.6B$ Power Business Unit where in the candidate will get to work on a wide range of exciting products such as IPD’s, PMICs, DC-DC converters and Drivers powering the next generation of automotive power needs. This is an early-stage growth opportunity where in the candidate will get to learn, build and over time contribute and influence the charter for Renesas’s massive Power product portfolio.

Essential Functions:

• Highly experienced in all aspects of Analog circuit design from block level to full chip with a demonstrated history in driving design innovation and best practices.
• Should have the ability to work independently with little supervision and drive the team to define, develop and execute the product plan from concept to tapeout.
• Must be proficient in transistor level design and system implementation of typical building blocks like charge pumps, comparators, amplifiers, bandgaps, linear regulators, switching regulators etc.
• Must have solid leadership experience in leading a team of engineers with a proven history of mentoring and promoting talent.
• Direct experience in building teams from scratch and developing power products in any of the desired functions is a big plus.

Analog and Connectivity Business Unit (A&C) is looking for a Staff Test Engineer to join our team to drive the test development of state-of-the-art Ultra-Wideband (UWB) product line. This is a unique and exciting opportunity to work with a cross-functional team to bring a product to volume production starting from product conception to production release. The job scope includes, but is not limited to, development of the test plan to ensure datasheet specifications are met. Design and debug Test SW and HW. Collaborate with multi-functional teams such as Design, Product, Applications and the OSAT teams during first silicon debug and release to production.  

Key Responsibilities:  

• Conception and definition of innovative and efficient test strategies for our mixed-signal ICs in close collaboration with our design teams and Design for Test Department 
• Design and development of both software and hardware for our state-of-the-art mixed-signal automated test systems  
• Support Design verification and silicon characterization in co-operation with design team and product engineering  
• Implementation, correlation and release of a reliable test solution at our OSATs and support of mass production ramp  
• Maintenance and improvement of production test setups during product lifetime 
• Drive technical innovation in the department 
• Provide a leadership role for the development project  
• Mentor, guide, and train junior staff members 

Principal Accountabilities: 

• Install and maintain Polarion, 3DS, Jama, R4J or other requirements management system on the existing infrastructure.
• Understand business requirements for access to real-time data via Polarion Reports.
• Design and develop live-page reports in Polarion
• Pro-active support Engineers with Polarion reports usage, traceability reports, requirements management
• Coach the reports creation according best practices, tool performance and aSPICE compliant.
• Offer online training for Engineering staff regarding Polarion configuration & usage.
• Understand & drive end-to-end architecture for optimal performance of Reports system
• Be the gatekeeper for required changes in the reports, with respect to corporate compliance to standard.
• Explore technologies/solutions for continuous improvements; prime Interface communication the vendor
• Be the main point of contact for Polarion reports and their usage

Key Performance Measures:

• Tool uptime and performance of the service
• Scalable architecture of new tool, with a ‘state-of-the-art’ level of security
• Business needs are properly acknowledged, managed and implemented.
• Regular training sessions for the new users of the service, and increased number of users of the tool.
• Ablility and willingness to learn new skills over time which are required for the job
• Integrate into the existing team and be a team player

1) 国内半導体生産工場(主に茨城県ひたちなか市の那珂工場)の生産システムを担当
2) 主な業務は半導体前工程工場の生産システムの開発・運用・保守

※就業場所の変更の範囲、従事すべき業務の変更の範囲については、選考時に詳細をお伝えいたします。

• Quote & Debit review in Model N
• Standard order management including expedites/pull ins/cancellation/push outs.
• Support Customer's RMA & other RMA related FA support.
• Support review of account booking/backlog/billing with Sales.
• Other ad-hoc support covering free of charge sample tracking for Distis, customer questionaires & other EHS/technical matters.
• Partner with Sales to manage all Renesas communications with Distis/customers.
• Renesas contact for Distis and Sales for any other topics

製造部門における製作・保全・ウエハ検査要員として、主に下記の業務をご担当頂きます。
交代勤務制での勤務となります。
　-　半導体の生産装置オペレーション
　-　生産装置の点検
　-　製品の運搬・着工・検査

Design Director – Power Management IC(PMIC)

Looking for a highly experienced Design Director to join the 2.6B$ Power Business Unit where in the candidate will get to work on state-of-the-art PMIC products which complement Renesas’s offering of MCUs, MPUs and SOCs in both Automotive and Industrial areas. This is an early-stage growth opportunity where in the candidate will get to build and directly influence the future roadmap of PMIC products.

• Manage the design team achieving best in class power, performance and area while meeting or beating schedule.
• Mentor direct reports, giving appropriate guidance and support while being responsible for performance reviews
• Conduct appraisals, make remuneration decisions and proactively manage performance driving development of the team.
• Delegate project tasks appropriately, ensuring required methodologies and procedures are followed
• Represent team and input into corporate engineering processes, and methodology improvement discussions.
• Communicate company and team goals and ensure all team members identify the relationship between company strategy and their contribution.
• Collaborate with the VP of Engineering to drive recruitment strategy and take responsibility for direct hiring within team.
• Drive resource planning, making recommendations to VP of Engineering.
• Make significant contribution into Renesas’s Analog and Digital Design strategy, through representation at group management meetings, customer reviews and cross-site initiatives.
• Keep abreast of industry developments, driving continual improvements within team through effective change management.
• Provide support and guidance to technical project leads, to ensure successful project execution.
• Responsible for continual personal and professional development for all team members.
• Overseeing pre-production process flow is followed by group for own projects, ensuring outcomes are of high quality.
• Ensure the entire team follows procedures and design practices that are required by internal guidelines as well as expected from any state-of-the-art technology leader in the industry.
• Manage analog input into RFQ process.

Principal Accountabilities: 

• Install and maintain Polarion, 3DS, Jama, R4J or other requirements management system on the existing infrastructure.
• Understand business requirements for access to real-time data via Polarion Reports.
• Design and develop live-page reports in Polarion
• Pro-active support Engineers with Polarion reports usage, traceability reports, requirements management
• Coach the reports creation according best practices, tool performance and aSPICE compliant.
• Offer online training for Engineering staff regarding Polarion configuration & usage.
• Understand & drive end-to-end architecture for optimal performance of Reports system
• Be the gatekeeper for required changes in the reports, with respect to corporate compliance to standard.
• Explore technologies/solutions for continuous improvements; prime Interface communication the vendor
• Be the main point of contact for Polarion reports and their usage

Key Performance Measures:

• Tool uptime and performance of the service
• Scalable architecture of new tool, with a ‘state-of-the-art’ level of security
• Business needs are properly acknowledged, managed and implemented.
• Regular training sessions for the new users of the service, and increased number of users of the tool.
• Ablility and willingness to learn new skills over time which are required for the job
• Integrate into the existing team and be a team player

Principal Accountabilities: 

• Install and maintain Polarion, 3DS, Jama, R4J or other requirements management system on the existing infrastructure.
• Understand business requirements for access to real-time data via Polarion Reports.
• Design and develop live-page reports in Polarion
• Pro-active support Engineers with Polarion reports usage, traceability reports, requirements management
• Coach the reports creation according best practices, tool performance and aSPICE compliant.
• Offer online training for Engineering staff regarding Polarion configuration & usage.
• Understand & drive end-to-end architecture for optimal performance of Reports system
• Be the gatekeeper for required changes in the reports, with respect to corporate compliance to standard.
• Explore technologies/solutions for continuous improvements; prime Interface communication the vendor
• Be the main point of contact for Polarion reports and their usage

Key Performance Measures:

• Tool uptime and performance of the service
• Scalable architecture of new tool, with a ‘state-of-the-art’ level of security
• Business needs are properly acknowledged, managed and implemented.
• Regular training sessions for the new users of the service, and increased number of users of the tool.
• Ablility and willingness to learn new skills over time which are required for the job
• Integrate into the existing team and be a team player

• Experience on Digital Post Silicon validation (3 – 4 years) senior engineer
• Experience in Post-Si Test plan creation and content development along with validation.
• Experience in micro controller Functional and Electrical Validation, ARM M33 or similar will be preferred
• Experience in Validating micro controller internal blocks like MRAM, SRAM, Reset etc.
• Experience in validating external interfaces such as SPI, I2C, UART, CAN, LIN, QSPI, JTAG
• Debugging software and hardware during validation.
• Experience with the usage of oscilloscopes and protocol decoders.
• Experience with usage of Renesas E2 Debuggers and Development Studio will be preferred 
• Exp in working with product engineering teams for HTOL/HVAL, ESD & latch up tests.
• Exp in coordinating with ATE testing team for test time optimization and tester test pattern developments.
• Strong knowledge of C , C++ and python languages

Additional Roles and Responsibilities:

• Instrument Automation using Python for PVT validation
• SPI/I2C/UART/CAN protocol electrical specifications understanding and debugging

Principal Accountabilities: (the 6-8 main areas of responsibility)

• Design of optimized digital blocks meeting functional, cost and low power constraints and ensure spec compliance.
• Develop TCL scripts and design constraints to perform synthesis, DFT insertion and static timing analysis.
• Support DFT strategy and implementation.
• Verification planning, feature extraction and verification test case development.
• Interface with P & R for digital hand-off and post layout verification.
• Develop test vectors for production test.
• Perform physical silicon device evaluation where necessary.
• Produce high quality documentation for own blocks.
• Develop work-around solutions where necessary to overcome device errata including documentation.
• All other tasks as deemed reasonable by your manager some of which will be set during annual performance review.

We are seeking a highly skilled and experienced Engineer to join our team. The ideal candidate will be responsible for performance modelling of System-on-Chip (SoC) designs using Platform Architect. This role involves working closely with cross-functional teams to optimize system performance and ensure the successful delivery of high-quality products. 

Key Responsibilities: 

• Develop and maintain performance models for SoC designs using Synopsys Platform Architect. 
• Collaborate with architecture, design, and verification teams to define performance requirements and ensure alignment with overall system goals. 
• Analyze and optimize system performance, including memory, CPU, interconnect subsystems and high-speed interface like PCIe, UCIe 
• Identify performance bottlenecks and propose solutions to improve system efficiency. 
• Conduct performance simulations and provide detailed analysis and reports. 
• Mentor and guide junior engineers in performance modelling techniques and best practices. 
• Stay updated with the latest advancements in SoC performance modelling and industry solutions. 

Job Type: Contractual

Job Description

· A deep understanding of user-centered design translating into sitemaps, user flows and customer journey maps to ensure a great user experience

· Development of high quality, responsive final screen designs for web applications and Mobile apps throughout the complete lifecycle

· Development of modern user interfaces/user-oriented solutions based on UX knowledge for various end devices

· Create graphics, icons, layouts and renderings with popular software tools such as Figma, Sketch, Photoshop and Illustrator

· Independent development of functional interaction solutions (user journeys, navigation flows, scribbles, wireframes, interactive prototypes) in close coordination with product owners, business development managers and developers

· Creation and improvement of wireframes, prototypes, style guides and userflows for effective communication of interaction ideas

· Advising customers in the process of design development/development of function driven interfaces

· Provide guidance in areas of UI/UX to business units and external development partners

· Follow the existing Corporate UI/UX design guideline and support to extend the Component Library to ensure all products are harmonized from UI/UX perspective Requirements:

· University degree in Digital Media, UX/UI Design, Interactive Design, Mobile/Web Design or adequate web design experience with excellent academic records

· Profound work experience in the relevant field

· Very good knowledge of a range of design tools e.g. Figma, Sketch, Invision, Adobe Creative Suite

· Ability to create, improve and use wireframes, prototypes, style guides and user flows to effectively communicate your interaction ideas

· Understanding of user-centered design methods, rapid prototyping and responsive web design

· A strong design portfolio to showcase

· Knowledge in frontend coding e.g. HTML/CSS/JavaScript is a plus but not mandatory

· Customer oriented thinking and strong innovation skills

· Very good communication skills

· Manual & Automation Testing

· Preparing Test reports & report issues to Development teams.

· Help troubleshoot issues

· Recommend improvements to enhance User Experience.

· Test planning, test automation, test execution, failure analysis of various modules

· Build and enhance an advanced automated test framework and suites.

· Maintain and extend existing software tools, test environments and test benches

· Work within a team of engineers to drive improvements in overall quality, testing processes and practices, and automation

· Write detailed test plans based on product/customer requirements (MRS/PRD and Use cases).

· Improve test strategies, using modern testing frameworks, automation tools, and industry best practices. Collaborate with development teams to integrate testing into the CI/CD pipeline.

· Perform all aspects of verification, including functional, structural, regression, load, and system testing.

· Help with executing test plans and share team status with stakeholders.

· Provide mentorship and supervision for junior team members.