Total 317 art design entertainment job vacancies in byron bay new south wales

The role of the Art & Design Technician is a key role within the Expressive Arts department and the wider community. Working alongside the teaching team, the technician will ensure that all students have the best possible experience in Visual Art and Design Technology, providing robust support for teaching and learning and curriculum delivery.

This role exists to support the smooth running of the Art and Design Technology classrooms, prep rooms and stores to support teaching and learning in the classroom. The technician role offers challenge and requires initiative alongside responsibility. The DCIS Art and Design Technician will be responsible for four specialist teaching spaces in the secondary school. This will involve preparing resources, equipment, and teaching materials for lessons, clearing up after lessons, managing and maintaining good order in the prep rooms, overseeing equipment, and maintaining stock levels of consumable materials. There is also a requirement to support school events relating to the faculty, including exhibitions, and performing arts productions and concerts.

Core Requirements of the Post

In fulfilling the requirements of the post, the art and design technology technician will aspire to the highest standards of professionalism and will, in particular:

▪ Support teaching staff by selecting and managing suitable materials to help promote Art and DT as a practical subject at KS3, IGCSE and IB level and in line with health and safety guidance.

▪ Manage the availability of, prepare and provide resources, equipment and other teaching materials as requested by the faculty teachers. The faculty uses a range of mixed media including wood, plastics, metals, fabric, print and paint. Experience with these materials and machinery related is desirable.

▪ Organise and manage the use of resources and materials, including the preparation of the material for lessons and safely disposing of waste following lessons.

▪ Managing H&S systems within each classroom and work with the Head of Art and Design technology to resolve any concerns, ensuring all safety protocols are followed.

Coordinate the procurement of materials / equipment alongside the Head of Art and Design Technology, and repair / replace / increase stock levels to accommodate changes in cohorts and curriculums.

Areas of Responsibility and Key Tasks

• Advise teaching staff on suitable materials to help promote subjects at KS3, IGCSE and IB level and in line with CLEAPPS guidance.
• Adhere to NAE and IGCSE/IBO/CIS/WASC specifications and requirements.
• Manage the availability and preparation of resources and equipment for lessons including but not limited to making exemplars and demos, prepping woodwork, kiln loading, 3D printing and laser cutting.
• Operate an up to date, online system of monitoring the availability of materials, resources and equipment.
• Manage the annual safety checking of equipment required.
• Support with reprographics and ICT
• To assist with the documentation of students work for submissions and exhibition.
• To understand and explain the use of new equipment and advise how it could be used in schemes of work.

Prepare and manage faculty spaces to aid teaching and learning.

• Keep storage areas clean and well organized, as well as sinks and worktops.
• Dispose of waste, recycle and reuse materials appropriately, heavy lifting sometimes required.
• Report any defects and damage to equipment to line manager and to arrange repair/service by the appropriate body when not in line with H&S guidelines.
• Support with mounting and displaying of students work around the school.

Procurement

• Update records maintaining an up- to- date inventory of equipment, materials, resources and their locations
• Order materials as requested, liaising with procurement department.
• Organize and check order deliveries. Inform the Head of Art and Design Technology if any equipment is faulty or materials are missing and follow up as directed.
• Distribute new stock and resources appropriately as instructed.
• Maintain a supplier database.
• Keep equipment and daily perishables clean, organized and well maintained.
• Review equipment needs within the department and advise on the purchase of new and replacement equipment.

Technical Support in Lessons

▪ Assist teachers, as requested, to facilitate student learning with respect to specific outcomes.

▪ Advise staff and visiting teachers about resources and equipment available.

▪ Advise teachers of activities that may support targeted learning outcomes.

Professional Responsibilities

▪ Support the life of the school beyond the classroom. Carry out additional reasonable duties as request by Line Managers or the Senior Leadership Team.

▪ Lead or support one or more afterschool co-curricular activities.

▪ Participate in day and residential weeks and other trips as required.

▪ Contribute to whole school learning initiatives duringthe term.

▪ Attend professional learning opportunities as directed.

Personal Requirements:

▪ Able to work with students and staff in the secondary school as an effective team-player.

▪ Self-sufficient and self-starter who can manage their time independently.

▪ Up to date with the latest trends, technologies, and techniques in your specific skill base.

▪ Ability to solve problems creatively and efficiently.

▪ Able to assist students as needed both academically and during practical activities.

▪ Able to support enrichment activities such as field trips and after school programmes (Trips and exhibition set up may occasionally go outside of school hours).

Promote and adhere to the Nord Anglia Education vision and values:

▪ Opportunity - for us, opportunities need to be meaningful, about achieving potential and making progress.

▪ Impact - for us, impact is about making a difference. It needs to be immediate, positive and lasting.

▪ Leadership - for us, leadership is about considering the teamʼs needs as well as your own, setting inspiring examples, being supportive and showing real accountability and responsibility.

▪ Respect - for us, respect is about listening, being inclusive, showing tolerance and getting the little things right.

All staff are required to manage effective personal development as part of NAEʼs commitment to invest in staff as the key resource in the organisation.

Each individual must ensure that they meet their statutory responsibilities and adhere to NAE and school policies with regard to Health and Safety, Equal Opportunities and other relevant legislation.

PERSON SPECIFICATION:

Experience

Worked with children within the age ranges of 11–18.

Skills

• Excellent oral and written communication skills.
• Ability to build productive positive relationships with young people to support their well-being and learning.
• Strong organisational skills.
• Personal Attributes
• Passionate about education and young people.
• Evidence of commitment to continuous professional development.
• Good sense of humour and collegial approach to directed tasks.
• Physically fit and healthy with a good stamina.

Other

• Hold a current Enhanced Criminal Records Bureau Disclosure or equivalent for countries lived in outside of the UK.
• Compliance with visa requirements for working in Singapore.
• A commitment to safeguarding and promoting the welfare of all pupils and the willingness to undertake appropriate child protection training when required.

Safeguarding

At Nord Anglia Education we are committed to providing a world class, safe, happy environment in which children and young people are able to thrive and learn. We are committed to safeguarding and promoting the welfare of all our students irrespective of race, ability, religion, gender or culture.

All post holders in regulated activity (having regular unsupervised contact with children) are subject to appropriate national and international vetting procedures including satisfactory criminal record checks from both your country of residence/birth and any country of residence within the last 10 years. The school will support candidates to obtain this.

Mission statement:

Lead the engineering execution of medium-size projects and ensure that all related activities are performed in accordance with Hitachi Energy policy, contractual agreements, quality standards, health, safety & environment requirements. Responsible for day-to-day designing and engineering activities aligned with schedule commitments. He / She is to possess technical knowledge and skills relating to the design of various transmission substation/Industry components, systems and equipment. To provide technical guidance to his/her project team and lead project engineering discussion.

Your responsibilities:

• You will design system while adhering to design and engineering principles of transmission substation/Industry, incorporate equipment, system, and safety features in design plans, comply with local and national safety standard and ethics that come with the design engineer role.
• You will maintain records and documents of all the work and design in accordance with unit and customer requirement.
• You will work in within the proposed schedule and budget for the project and liaise with project stakeholders with status update to them regarding the status of the work.
• You will coordinate mechanical and electrical tests on design, if required, conduct tests on equipment against fundamental design.
• You will manage department's compliance with organization’s risk management framework, review design drawings for practicability, completion timeframe and research capabilities.
• You will assist in development engineering resource planning strategy, coordinate with factory and supplier to ensure the design meet with the requirement, prepare design related calculation and issue bill of material·
• Living Hitachi Energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.

Your background:

• You hold Electrical Engineering degree or equivalent.
• Preferably with 3 years’ experiences in Electrical/Transmission Industry.
• Experience and proficient knowledge and skills in BIM - Autodesk REVIT (3D model)
• Experience in switchgear planning, design and bidding related tasks.
• Good knowledge of substations equipment, protection relays and network automation.
• Knowledge of Electrical/Transmission Utilities Industry is preferred.
• Proficiency in English language.

Structural Design Engineer - Tekla
£60k + DOE

Excellent progression opportunity with a structural steelwork supplier managing full projects through design, manufacture, and installation.
Initially starting as a senior engineer with a view to progressing into a senior management role, the role would suit someone looking for their next career move.

As the Structural Design Engineer you will:
Producing steelwork designs and calculations
Working from architect GA drawings to create Tekla models
Producing fabrication drawings for manufacture and installation drawings
Producing bills of material
Liaising with clients regarding technical queries and RFI's
Ensure compliance with industry and statutory standards

As the Structural Design Engineer:
Extensive experience working with TEKLER on steel-framed buildings is essential.
Proven background in producing cost-effective solutions to design requirements.
The ability to manage projects from beginning to end
Experience in developing GA's for steelwork from architect drawings and site measurements
Experience producing fabrication drawings.
Have the ability to work on your own initiative,
Confident communication skills in liaising and collaborating with customers, management, and shop floor

Benefits:
Profit related bonus
Free Parking
Private health care
6% pension
Life cover 4 x salary

Call Yasemin at Travail on 01423 530138

Travail Employment Group Ltd is acting as an Employment Agency in relation to this vacancy.

Electrical Design Engineer - Facilities Management - Barnsley - Up to £56,860 inclusive of car allowance plus excellent benefits.

This is a fantastic opportunity to join one of the largest Facilities Management companies in the UK at one of their prestigious clients' sites based in Barnsley who are experiencing significant growth. An outstanding opportunity to become part of truly first-rate facilities.

(Hybrid Role) Barnsley based with some travel in the UK to customer sites

Salary: Up to £56,860 inclusive of car allowance plus excellent benefits

Benefits to include:

• Car allowance
• Company pension
• Flex benefits (discount scheme)
• Company sick pay
• 25 days Holiday plus BH
• Private Healthcare

Location: (Hybrid Role) Barnsley based with some travel in the UK to customer sites

Hours of work: 8:00am - 5:00pm, Monday to Friday

Role Responsibilities:

• Collation and compilation of design documentation, ensuring client design objectives are met.
• Development of design drawing packages from initial design through to As Fitted drawings.
• On "live" projects undertake with the operational team Onsite Reviews to ensure quality standards and adherence to design are being met.
• Review 3rd party design and cost submissions for accuracy and adherence to client specification.
• Development and production of LV AC electrical design solutions through electronic software packages.
• Produce detailed electrical design information in both written and drawing formats.
• Assist the commercial team where required to compile accurate and comprehensive cost submissions.
• Be the lead for pre-construction activities. Such activities including conducting site surveys and the detailed Compilation of schedule of requirements documentation that have a direct link to the commercial team in the production of costs.
• Outsourcing design activities where required to specialists, consultants and sub-contractors.
• Take the leading role in the compilation and development of tender submissions to our client.

The successful candidate:

• In depth knowledge and understanding of commercial & industrial electrical systems. Awareness of critical environments & systems is beneficial but not essential.
• Knowledge of HV & DNO processes & procedures beneficial but not essential.
• Experience in CDM Projects in construction and building services
• Electrical biased with formal qualifications to C&G or HNC/HND standards.
• AutoCad and drawing package software experience
• BS7671 18th Edition Wiring regulations
• C&G Design, Erection and Verification (2396)
• Numeracy skills and commercial awareness
• CSCS card holder
• The role may require UK wide travel and overnight stays, must have full UK driving licence.

Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.

ROLE DESCRIPTION SUMMARY

Join us as a Project Safety Engineer (PSE), where you will be responsible to perform systems safety engineering activities required to develop a safe solution (mainly a software), product or projects. In this role, you will apply your Safety Engineering skills within an interdisciplinary team covering all aspects of a system lifecycle.

KEY ACTIVITIES AND RESPONSIBILITIES

As aProject Safety Engineer, you are accountable for:

As a Project Safety Engineer, you conduct safety engineering activities and produce the required artefacts on time, budget and quality for the allocated project / product.

This includes:

· Conducting a range of activities that identify and address safety hazards and risks by ensuring compliance to legislations, safety policies and the Thales Solution Safety Management System

· Developing and maintaining safety key artefacts: system safety program plans, safety case reports, hazard logs, risk assessments, preliminary system safety assessments and system safety assessments commensurate with the processes, standards and best practices employed by air traffic management domain including fault tree analysis and GSN

· Work closely with the engineering integrated product teams to identify, derive and manage safety requirements, ensure that they are included in the solution design baseline and that their compliance is demonstrated through verification & validation and developing effective mitigations and controls to hazards, procedure and/or training

· Provide timely safety subject matter expertise and engineering support. This includes participating and/or chairing system safety working groups, safety review boards and other safety committees and workshops as required

· Apply Model Based System Engineering tools and modelling methodologies to define system safety functions and requirements as well as managing safety data

· Escalate risks when necessary, provide clear reporting and recommendations

· Work in accordance with Thales processes and practices, and contribute to their improvement

You will also improve the Safety culture within AMS in Singapore by developing, sharing and/or improving safety training material, delivering training as required and pro-active behaviour.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

SKILLS & ABILITIES

· Experience in the Systems Safety Engineering process in a safety critical industry such a Defence, Land Domain, Manufacturing, Vehicles, Railway, Aerospace, Nuclear or Oil & Gas

· Demonstrated experience applying industry best practice system safety analysis and operational risk management techniques and methodologies

· Proven track record of successfully leading the execution of system safety programs

· Familiarity with Eurocontrol Safety Assessment Methodology and its system safety engineering processes including core system safety analysis techniques: FHA, PHA, PSSA, SSA, ETA, FTA, HAZOP, FMECA, RAM, etc.

· Experience and understanding of the V-cycle and how/when the safety engineering activities are interfaced with

· Knowledge of international standards of the safety domain: ARP 4761/4754, DO-278A/178C, ED-153

· Excellent problem solving and decision-making abilities, great and positive attitude, ability to learn

· Adapt easily to change to work in an agile system engineering environment to understand a problem and provide optimal solution options in terms of size, scale and complexity

· Able to travel to Melbourne, Australia (a few weeks a year).

EXPERIENCE

· Minimum 10 years’ experience in a similar or adjacent role

· Familiar with management and engineering tools such as DOORS, Polarion, JIRA and FTA tool

· Experienced in top-down (abstract ideation) and bottom-up (detailed implementation) approaches in engineering solutions and can work with colleagues with these views

· Knows the structure of a software and be able to apply safety techniques

· Team player: harmonising, influencing, negotiating, seeking feedback and mentoring / coaching

· Self-driven and highly motivated, passionate about systems safety engineering and continual process improvement to achieve optimal outcomes for all stakeholders

· Keen to grow product and process knowledge over time, to enhance your capabilities as a System Safety Engineer within the given environment of practice

· Knowledge of ‘design-to-cost’ approach means and can quickly preform a cost-benefit analysis to different methodologies before executing a system engineering task

· Excellent written and oral communication skills in English

QUALIFICATIONS

· Engineering or Computer Science degree

· System Safety degree

DESIRABLE

· Understand and application of RAMS techniques such as RBD, life data analysis, MTTF, MTBF, MTTR, FMECA

· Knowledge of transverse engineering disciplines: human factor and cyber-security and their links with safety engineering

· Experience in the development of software products and projects in a variety of methodologies, with a particular focus on iterative/agile development

· Conduct independent safety assurance activities including auditing

· Experience in the ATM Domain and related standards (ICAO)

· French language knowledge

General / Special Requirements

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

· Occasional international travel may be required

The Recruitment Co are currently looking for an Electrical Design Engineer, to join an expanding controls team for one of our Turnkey project Engineering clients.

What to Expect:

• Perform tasks as assigned by the Controls Division Manager.
• Use AutoCAD software to create electrical designs.
• Develop engineered solutions based on specifications under the supervision of the Electrical Contract Manager.
• Participate in all project phases, from enquiry and concept design to detailed design.
• Report design progress and forecasts to the Electrical Contract Manager.
• Attend client and sub-contractor meetings to provide technical expertise and project support.
• Produce test documents and attend Factory Acceptance Testing (FAT) at panel manufacturers' premises.
• Stay updated on the latest developments in electrical engineering.

What we need from you:

• Engineering qualification at Level 4 or higher (HNC/HND/Degree or equivalent).
• Proficiency in AutoCAD and cable design software.
• Working knowledge of BS EN 60204 and BS 7671 for compliant design production.
• At least 5 years of relevant design experience.
• Experience in control panel and MCC design, preferably with Siemens equipment.
• Knowledge of industrial control systems, including electrical distribution equipment, motor control centers, and PLC control panels.
• Skilled in producing single-line diagrams, schematics, bills of materials (BOM), cable calculations, and cable schedules.
• Highly organized with strong attention to detail.
• Excellent problem-solving abilities.
• Ability to work proactively both independently and as part of a small team.

Desirable Knowledge and Experience:

• Understanding of AC/DC drive systems.
• Familiarity with hydraulic systems.
• Experience with Safety Related Control Systems in accordance with BS EN IEC 62061 or BS EN ISO 13849.
• Experience with installation and commissioning procedures is an advantage.

What we can offer you:

• A Starting salary of up to £60,000
• A role with a Market Leader, offering excellent room for progression.
• 25 days holiday + Bank Holidays
• Early Finish on a Friday
• Company Pension

If this role would be of interest to you, feel free to contact me on 01484 970238 to discuss further or simply click "apply".

Electrical Design Engineer - Facilities Management - Barnsley - Up to £56,860 inclusive of car allowance plus excellent benefits.

This is a fantastic opportunity to join one of the largest Facilities Management companies in the UK at one of their prestigious clients' sites based in Barnsley who are experiencing significant growth. An outstanding opportunity to become part of truly first-rate facilities.

(Hybrid Role) Barnsley based with some travel in the UK to customer sites

Salary: Up to £56,860 inclusive of car allowance plus excellent benefits

Benefits to include:

• Car allowance
• Company pension
• Flex benefits (discount scheme)
• Company sick pay
• 25 days Holiday plus BH
• Private Healthcare

Location: (Hybrid Role) Barnsley based with some travel in the UK to customer sites

Hours of work: 8:00am - 5:00pm, Monday to Friday

Role Responsibilities:

• Collation and compilation of design documentation, ensuring client design objectives are met.
• Development of design drawing packages from initial design through to As Fitted drawings.
• On "live" projects undertake with the operational team Onsite Reviews to ensure quality standards and adherence to design are being met.
• Review 3rd party design and cost submissions for accuracy and adherence to client specification.
• Development and production of LV AC electrical design solutions through electronic software packages.
• Produce detailed electrical design information in both written and drawing formats.
• Assist the commercial team where required to compile accurate and comprehensive cost submissions.
• Be the lead for pre-construction activities. Such activities including conducting site surveys and the detailed Compilation of schedule of requirements documentation that have a direct link to the commercial team in the production of costs.
• Outsourcing design activities where required to specialists, consultants and sub-contractors.
• Take the leading role in the compilation and development of tender submissions to our client.

The successful candidate:

• In depth knowledge and understanding of commercial & industrial electrical systems. Awareness of critical environments & systems is beneficial but not essential.
• Knowledge of HV & DNO processes & procedures beneficial but not essential.
• Experience in CDM Projects in construction and building services
• Electrical biased with formal qualifications to C&G or HNC/HND standards.
• AutoCad and drawing package software experience
• BS7671 18th Edition Wiring regulations
• C&G Design, Erection and Verification (2396)
• Numeracy skills and commercial awareness
• CSCS card holder
• The role may require UK wide travel and overnight stays, must have full UK driving licence.

Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.

At Cheil, we are passionate about ideas that move.

We believe that the right idea will move seamlessly across channels: from online to offline, above the line to below the line, in-store to out-of-home. It will move brands, move products and most importantly, move people. The right idea will move everything forward.

Established in 1973 with headquarters in Seoul, South Korea, Cheil Worldwide is one of the world’s leading integrated marketing communications networks, with more than 7,200 employees globally in more than 54 offices in 46 countries.

For more information, visit us at: www.cheil.com.

We are inviting candidates for the position of:

Content Publishing / Graphic Design Intern (Full-time internship)

Job description

Working with the Samsung Electronics SEA & Oceania business, you will have the privilege of working within a big data environment where strategic decisions are made, guiding best in class upholding brand compliance.

• Content Audit & Analysis: Work closely with the Content Team to conduct content audits on Samsung.com to ensure content is brand compliant and aligns with our strategic objectives.

• Progress Tracking & Reporting: Analyse, track, and report progress on weekly and monthly reports for multi-market operations, providing insights and recommendations for optimization.

• Training Document Management: Prepare and maintain training documents, Standard Operating Procedures (SOPs), and any other necessary documents to support team operations and knowledge transfer.

• Assist in Design Projects: Execute simple design tasks such as key visual adaptations for regional campaigns, ensuring alignment with brand guidelines and creative direction.

• Asset Management: Organize and maintain digital assets, including images, graphics, and other design elements, to facilitate efficient workflow and collaboration within the team.

Desired Skills and Experience

• Good skill in Excel and PPT

• Good skill in Adobe Illustrator and Photoshop

• Pursuing or recently completed a degree in Graphic Design, Visual Communication, or a related field.

• Analytical and quantitative, with strong attention to detail

• Self-starter with excellent communication and collaboration skills, with the ability to work effectively in a team environment.

• Ability to thrive in a fast-paced, ambiguous, interruptive environment

• Ability to work independently as well as work collaboratively toward a common goal

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.
  

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With min. 2 years of relevant experience in similar field.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!